Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/2-U-18

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/2-U-18
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    OTHER
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Multilateral
    Indicator telling if the parent well is multilateral, meaning it has more than one branch radiating from the main borehole. Example of legal values: YES, NO. See also Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    NO
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/2-U-18
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    776-G
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    24
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    05.11.2016
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    28.11.2016
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    28.11.2018
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    28.11.2016
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    28.11.2018
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    PILOT
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    30.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    115.2
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2143.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2138.6
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    6
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    89
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SKAGERRAK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 52' 4.3'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 32' 43.9'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6525577.57
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    473788.38
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8052

  • Wellbore history
    General
    Well 16/2-U-18 was drilled on the Johan Sverdrup Field on the Utsira High in the North Sea. The well objective was to reduce the geological uncertainty in the Espevær North structure in order to place the planned injectors from the E-template in a robust location with regards to sand thickness and FWL.
    Operations and results
    well 16/2-U-18 was spudded with the semi-submersible installation Deepsea Atlantic on 5 November 2016 and drilled to TD at 2143 m (2139 m TVD) m in the Triassic Skagerrak Formation. Operations proceeded without significant problems. The well was drilled with Seawater and hi-vis pills down to 951 m, with Aquadrill mud from 951 to 1748 m, and with Carbosea oil-based mud from 1748 m to TD.
    The Draupne Formation was encountered at 1947 m (1943 m TVD) and constitutes of muddy spiculites. Intra-Draupne Formation sandstone was penetrated from 1954 m (1950 m TVD) to 1978 m (1974 m TVD). A thin Hugin Formation sandstone is between the Viking Group and the Statfjord Group and is in communication with the Viking Group. Shales in the top of the Eiriksson Formation constitutes a pressure barrier. Hence, the pressure gradient in the water in the Intra-Draupne and Hugin sandstones is 0.4 bar higher than in the homogeneous thick sand of the Eiriksson Formation below the shale. These sands have better reservoir properties than the Intra-Draupne Formation sandstone. The Eiriksson Formation sandstone is 1 bar depleted compared to well 16/2-10 reservoir sandstone. This is as expected based on the regional pressure depletion in the area.
    Fluid contacts are not conclusive in the well. The deepest possible water up to depth is 1956.5 m where a clean formation water sample was taken. A free water level is weakly indicated by the logs in the homogeneous sand at 1954.6 m, but this cannot be confirmed by pressure data. A paleo-OWC can be interpreted down to 1967 m, but again this is uncertain due to partially missing core at this level.
    Shows were present in sandstones in the interval 1988 to 2028 m in the Statfjord Group. They were typically described as poor to moderate to strong hydrocarbon odour, no to even stain, poor streaming cloudy cut fluorescence white stain, yellowish gold occasionally bluish gold even bright direct fluorescence, moderately streaming becoming strongly cloudy cut fluorescence, spotted residual fluorescent ring, brown patchy residual ring.
    The interval from 1937 to 2077 m was cored in seven cores with variable recovery from 29.71% in core 3 to 100% in cores 5 and 7. Water samples were taken with the RCX tool at 1956.5 m, 2020.5 m and 2046.5 m.
    The well was permanently abandoned on 28 November 2016.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    950.00
    2143.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1937.0
    1937.5
    [m ]
    2
    1937.6
    1963.6
    [m ]
    3
    1965.0
    1967.1
    [m ]
    4
    1972.0
    1994.3
    [m ]
    5
    1995.5
    2023.1
    [m ]
    6
    2023.1
    2050.9
    [m ]
    7
    2050.9
    2078.8
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    134.2
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    36
    208.3
    42
    209.0
    0.00
    936.0
    0.0
    1.49
    FIT
    INTERM.
    13 3/8
    940.5
    17 1/2
    948.0
    0.00
    LINER
    9 5/8
    1742.0
    12 1/4
    1748.0
    1.51
    FIT
    OPEN HOLE
    2143.0
    8 1/2
    2143.0
    0.00

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    DSL CN ZDL ORIT XMAC HDIL
    950
    2138
    DSL FLEX MREX
    1925
    2138
    GR GXPL ORIT UCPL
    1742
    2138
    GR RTC IFX RLVP RCX SEN RLVP
    1947
    2118
    MWD - GR RES
    216
    948
    MWD - GR RES
    1936
    2143
    MWD - GR RES AC
    948
    1745
    MWD - NBGR GR RES
    1745
    1938
    ZVSP
    160
    2138

  • Lithostratigraphy

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    948
    1.25
    12.0
    Aquadrill
    1748
    1.20
    18.0
    CARBOSEA
    1971
    1.21
    19.0
    CARBOSEA
    1996
    1.23
    23.0
    CARBOSEA
    2040
    1.22
    24.0
    CARBOSEA
    2078
    1.23
    20.0
    CARBOSEA
    2143
    1.22
    20.0
    CARBOSEA

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1950.6
    [m]
    C
    CGG
    1952.0
    [m]
    C
    CGG
    1953.0
    [m]
    C
    CGG
    1955.0
    [m]
    C
    CGG
    1978.4
    [m]
    C
    CGG
    1986.0
    [m]
    C
    CGG
    1987.1
    [m]
    C
    CGG
    1991.0
    [m]
    C
    CGG
    1993.3
    [m]
    C
    CGG
    2009.4
    [m]
    C
    CGG
    2014.0
    [m]
    C
    CGG
    2024.7
    [m]
    C
    CGG
    2050.1
    [m]
    C
    CGG
    2054.1
    [m]
    C
    CGG