16/4-4
Export:
PDF
![PDF icon](https://factpages.sodir.no/Images/file-pdf.png)
-
General information
-
Wellbore history
GeneralWell 16/4-4 was drilled on the south-west part of the Utsira High in the Norwegian North Sea. The objective of the well was to prove hydrocarbons in the Ty/Heimdal Paleocene turbidite sandstones in the Biotitt prospect. It was important to acquire sufficient data to understand the reservoir characteristics and fluid distribution.Operations and resultsWildcat well 16/4-4 was spudded with the jack-up installation West Epsilon on 28 December 2006 and drilled to TD at 2409 m at the top of the Late Cretaceous Tor Formation. The well was drilled with seawater/bentonite/polymer mud from down to 1213 m, and with KCl/PAC/GEM GP mud from 1226 m to TD. No shallow gas was observed.The well penetrated rocks of Quaternary, Tertiary and Cretaceous age. The Ty reservoir section was encountered at 2271 m, 12 m deeper than prognosed. It was 79 m thick and consisted of fine to medium sandstone with claystone and limestone. The Heimdal Formation was not present in the well. The pressure tests indicated an approximately 7 m thick gas/condensate column in the upper part of the Ty Formation. There were no hydrocarbon indications elsewhere in the well.One core was cut from 2275 m to 2302 m in the Ty Formation. Twenty excellent MDT pressure tests were acquired together with MDT water samples at 2284.9 m and MDT condensate samples at 2272.5 m.The well was permanently abandoned on 23 March 2003 as a gas/condensate discovery.TestingNo drill stem test was performed. -
Cuttings at the Norwegian Offshore Directorate
Cuttings at the Norwegian Offshore Directorate Cuttings available for sampling?YESCuttings at the Norwegian Offshore Directorate Cutting sample, top depth [m]Cutting samples, bottom depth [m]260.002409.00 -
Cores at the Norwegian Offshore Directorate
Cores at the Norwegian Offshore Directorate Core sample numberCore sample - top depthCore sample - bottom depthCore sample depth - uom12275.32301.8[m ]Cores at the Norwegian Offshore Directorate Total core sample length [m]26.5Cores at the Norwegian Offshore Directorate Cores available for sampling?YES -
Oil samples at the Norwegian Offshore Directorate
Oil samples at the Norwegian Offshore Directorate Test typeBottle numberTop depth
MD [m]Bottom depth
MD [m]Fluid typeTest timeSamples availableDST0.000.00CONDENSATEYES -
Lithostratigraphy
Lithostratigraphy Top depth [mMD RKB]Lithostrat. unit14083010301149127818971925208120812105214422482271235023502404 -
Composite logs
Composite logs Document nameDocument formatDocument size [MB]pdf0.29 -
Logs
Logs Log typeLog top depth [m]Log bottom depth [m]MDT22722344MSCT22212274MWD - GVR ECHOS TELES22122409MWD - VISIO ARC2502212PEX HRLA DSI HNGS22022402VSP ZO VSI-41632400 -
Casing and leak–off tests
Casing and leak–off tests Casing typeCasing diam.
[inch]Casing depth
[m]Hole diam.
[inch]Hole depth
[m]LOT/FIT mud eqv.
[g/cm3]Formation test typeCONDUCTOR30245.036250.01.20LOTSURF.COND.13 3/81213.017 1/21226.01.50LOTINTERM.9 5/82201.012 1/42212.01.88LOTOPEN HOLE2409.08 1/22409.00.00LOT -
Drilling mud
Drilling mud Depth MD [m]Mud weight [g/cm3]Visc. [mPa.s]Yield point [Pa]Mud typeDate measured2501.04BENTONITE/SEAWATER 13351.04SPUD MUD4010.009.0SPUD MUD12261.095.0KCL/POLYMER21361.3718.0KCL/POLYMER/GLYCOL22751.206.0KCL/POLYMER/GLYCOL24091.2012.0KCL/POLYMER/GLYCOL -
Pressure plots
Pressure plots The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.Pressure plots Document nameDocument formatDocument size [MB]pdf0.23