Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
27.04.2024 - 01:34
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/1-27

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-27
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-27
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN16201. Inline 1853 crossline 1379
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1652-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    42
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    01.03.2017
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    11.04.2017
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    11.04.2017
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    11.04.2019
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    11.04.2019
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    ÅSGARD FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    TRIASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    SKAGERRAK FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    30.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    108.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2258.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2258.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    1.3
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    95
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 50' 18.11'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 11' 56.79'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6522480.48
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    453769.86
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8124
  • Wellbore history

    General
    Well 16/1-27 was drilled on the Edvard Greg Field on the Utsira High in the North Sea. It was drilled as an appraisal well to verify top reservoir and sand content in the western part of the field.
    Operations and results
    Appraisal well 16/1-27 was spudded with the semi-submersible installation Island Innovator on 1 March 2017 and drilled to TD at 2258 m in Basement rock. Operations proceeded without significant problems. The well was drilled with seawater and hi-vis pills down to 611 m and with Aquadril mud with 4% glycol from 611 m to TD.
    Top reservoir, Åsgard Formation sandstone, was encountered at 1962 m, directly overlying Triassic Skagerrak Formation sandstone at 1968.35 m. The reservoir contained oil from top down to the OWC at 1978 m (1948 m TVD MSL), 9 meters deeper than the established FWL at 1939 m TVD MSL in the central Edvard Grieg area. Pressure data showed one oil gradient through the Cretaceous to Triassic sandstones, and two water gradients below the oil: one in communication with the oil gradient and one with 6 bar higher pressure in the lower conglomerates of the Skagerrak Formation, below a shaly layer around 2150 m.
    Apart from shows in the reservoir section significant oil shows were recorded above reservoir level. First oil show in the well was described in thin Oligocene sandstones at 1309 to 1322.5 m as fair patchy straw yellow direct fluorescence, fast blooming to streaming bluish white cut fluorescence, medium straw to bluish white fluorescent residue, no visible residue.
    At 1506 to 1543 m, in thin Eocene Hordaland Group sandstones, there were oil shows described as no to weak hydrocarbon odour, no to medium brown oil stain, patchy to even weak to dull straw yellow to orange direct fluorescence, slow blooming to streaming bluish white cut fluorescence, weak bluish white fluorescent residue, no visible residue.
    At 1811 to 1858 m, in Early Eocene Balder Formation and base Hordaland group Tuff and limestone, there were oil shows described as medium brown to dark brown oil stain, weak spotty to patchy bluish white to light yellowish brown direct fluorescence, slowly bleeding to blooming light yellowish brown cut fluorescence, no fluorescent or visible residue. Below the OWC only poor shows were recorded down to 2023 m.
    Three cores were cut. Core 1 was cut from 1967 to 1993.1 m with 95.8% recovery. The core-log shift is +0.7 m. Core 2 was cut from 1993.1 to 2002.2 m with 78.8% recovery. The core-log shift is +0.5 m, Core 3 was cut from 2002.2 to 2023 m with 98.7% recovery. The core-log shift is -0.25 m. MDT fluid samples were taken at 1972.3 m (oil), 1976 m (oil), and 2025 m (water). The two oil sampling stations gave similar oils according to PVT analysis, with GOR ranging from 120.3 to 123.2 Sm3/Sm3 and stock tank oil density ranging from 0.8545 to 0.8565 g/cm3.
    The well was permanently abandoned on 11 April 2017 as an oil appraisal
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    620.00
    2257.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1967.0
    1992.1
    [m ]
    2
    1993.1
    2000.1
    [m ]
    3
    2002.0
    2022.7
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    52.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    FMI MSIP
    612
    1922
    FMI MSIP
    1875
    2260
    HNGS XPT PEX HRLA
    612
    1928
    MDT
    1963
    2239
    MSCT
    1952
    2114
    MSCT
    2098
    2249
    MWD - DIR PWD GR RES ECD
    183
    619
    MWD - GR PWD RES DIR DEN NEU MAG
    1912
    2258
    MWD - GR RES PWD DIR
    608
    1967
    USIT
    1300
    1940
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    204.0
    36
    204.0
    0.00
    SURF.COND.
    20
    611.6
    26
    618.0
    0.00
    PILOT HOLE
    620.0
    9 7/8
    620.0
    0.00
    623.0
    0.0
    1.55
    FIT
    INTERM.
    9 5/8
    1941.1
    12 1/4
    1948.0
    1.71
    LOT
    OPEN HOLE
    2258.0
    8 1/2
    2258.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    215
    1.04
    SPUD-MUD
    514
    1.03
    1.0
    Sea water
    618
    1.30
    10.0
    AQUA-DRILL WBM
    618
    1.04
    SPUD-MUD
    859
    1.30
    12.0
    AQUA-DRILL WBM
    1345
    1.35
    17.0
    AQUA-DRILL WBM
    1664
    1.35
    18.0
    AQUA-DRILL WBM
    1951
    1.14
    14.0
    AQUA-DRILL WBM
    2258
    1.14
    16.0
    AQUA-DRILL WBM