30/6-5
Export:
PDF

-
General information
-
Wellbore history
GeneralWell 30/6-5 was drilled on the Brage Horst east of the Gullfaks fault block in the North Sea. The main purpose was to test the hydrocarbon potential in Middle Jurassic sandstone.Operations and resultsWildcat well 30/6-5 was spudded with the semi-submersible installation Deepsea Saga on 11 June 1981 and drilled to TD at 3550 m in the Triassic Lunde Formation. No significant problem was encountered in the operations. The well was drilled with spud mud down to 951 m, with gypsum/polymer mud from 951 m to 1801 m, and with gel/lignosulphonate mud from 1801 m to TD.The Brent Group, Tarbert Formation was encountered at 2824 m. From wire line logs and petrophysical analysis oil was found from 2841 m down to 2899 m. Pressure measurements indicated oil/water contact at 2907 m. Shows on cores continued down to 2933 m. The Etive Formation represented the main part of the net pay.Eight cores were cut in the well. Cores 1 and 2 were cut in the interval 2843.5 - 2854.7 m. Cores 3 to 8 were cut in the interval 2871.5 - 2949.8 m. RFT oil samples were taken at 2847.5 m, 2867.1 m (film of oil), 2871.2 m (traces of oil), 2874.5 m, 2881 m, 2889 m, 2923 m (film of oil). The samples proved H2S contents in the range 30 - 50 ppm.The well was permanently abandoned on 15 August 1981 as an oil discovery.TestingThe rig lacked qualified equipment and personnel trained for drill stem testing with the levels of H2S proven by RFT sampling. Testing was therefore abandoned. -
Cuttings at the Norwegian Offshore Directorate
Cuttings at the Norwegian Offshore Directorate Cuttings available for sampling?NOCuttings at the Norwegian Offshore Directorate Cutting sample, top depth [m]Cutting samples, bottom depth [m]250.003547.00 -
Cores at the Norwegian Offshore Directorate
Cores at the Norwegian Offshore Directorate Core sample numberCore sample - top depthCore sample - bottom depthCore sample depth - uom12843.52848.2[m ]22848.32853.1[m ]32871.52874.4[m ]42874.52893.8[m ]52893.72909.1[m ]62909.02919.6[m ]72919.52938.9[m ]82938.72949.5[m ]Cores at the Norwegian Offshore Directorate Total core sample length [m]87.7Cores at the Norwegian Offshore Directorate Cores available for sampling?YES -
Core photos
-
Lithostratigraphy
Lithostratigraphy Top depth [mMD RKB]Lithostrat. unit18172687919081908202321232203240824522452259328412841286529582958307131233223 -
Geochemical information
-
Documents – reported by the production licence (period for duty of secrecy expired)
Documents – reported by the production licence (period for duty of secrecy expired) Document nameDocument formatDocument size [MB]pdf17.39 -
Logs
Logs Log typeLog top depth [m]Log bottom depth [m]CBL CCL VDL GR5551798CBL CCL VDL GR5551798CBL CCL VDL GR16003550DLL MSFL GR27893168FDC CNL GR CAL9503550HDT18003550ISF SON GR SP2423550 -
Casing and leak–off tests
Casing and leak–off tests Casing typeCasing diam.
[inch]Casing depth
[m]Hole diam.
[inch]Hole depth
[m]LOT/FIT mud eqv.
[g/cm3]Formation test typeCONDUCTOR30242.036242.00.00LOTSURF.COND.20950.026955.01.74LOTINTERM.13 3/81801.017 1/21815.01.77LOTINTERM.9 5/82789.012 1/42805.01.65LOTLINER73548.08 1/23550.00.00LOT -
Drilling mud
Drilling mud Depth MD [m]Mud weight [g/cm3]Visc. [mPa.s]Yield point [Pa]Mud typeDate measured2501.0853.0waterbased5801.0843.0waterbased7501.1043.0waterbased11251.0950.0waterbased13551.1248.0waterbased21551.3759.0waterbased25551.4350.0waterbased30251.2550.0waterbased33251.2751.0waterbased -
Pressure plots
Pressure plots The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.Pressure plots Document nameDocument formatDocument size [MB]pdf0.22