Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
27.04.2024 - 01:34
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6506/11-10

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6506/11-10
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6506/11-10
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    OMV 13 M01; Inline 2676. Xline 2851
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    OMV (Norge) AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1679-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    140
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    28.11.2017
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    17.04.2018
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    17.04.2020
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    17.04.2020
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS/CONDENSATE
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EARLY CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    LANGE FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    MIDDLE JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    GARN FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    342.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4536.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4536.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ROR FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    65° 13' 50.54'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    6° 25' 47.44'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7236795.23
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    379866.36
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8317

  • Wellbore history
    General
    Well 6506/11-10 was drilled to test the Hades and Iris prospects on the western margin of the Halten Terrace on the eastern flank of the Sklinna Ridge in the Norwegian Sea. The primary objective (Hades) was to test the hydrocarbon potential in Early Cretaceous intra-Lange Formation sandstones (Breiflabb Sandstone Member in the NORLEX stratigraphy). Secondary objective (Iris) was to test the hydrocarbon potential in the Middle Jurassic Garn Formation.
    Operations and results
    Wildcat well 6506/11-10 was spudded with the semi-submersible installation Deepsea Bergen on 28 November 2017. A 36” section was drilled first, followed by a 9 7/8” pilot hole to 1407 m to check for shallow gas. Then the 26” section was drilled before the BOP and riser was installed with 20” casing at 1409 m. Final TD was set at 4536 m in the Early Jurassic Ror Formation. Operations proceeded without significant problems. The well was drilled with seawater and hi-vis pills down to 1428 m, with Glydril mud from 1428 m to 2652 m, and with Rheguard oil-based mud from 2652 m to TD.
    The primary objective intra-Lange Formation sandstone was penetrated from 3933 to 3976 m. It consists of  interlayered sandstones and claystones with an 8 m massive sandstone on top and was found gas-filled from top to a gas-down-to contact at 3968 m. Relatively high resistivities and sampling of water with oil at 3998.3 m indicate some hydrocarbon saturation also below 3968 m. The secondary objective Garn Formation was encountered at 4223 m and was gas-bearing down to a gas-water contact at 4318 m. This reservoir can be divided in two units: an upper fine-grained micaceous and cemented  unit and a coarser grained, highly porous and permeable unit below 4292 m. This unit have permeabilities reaching 24 Darcy. Oil shows in the well were weak and questionable due to masking by the oil-based mud.
    Three cores were cut in the well. Core 1 was cut from 3942 to 3970 m in the intra-Lange sandstone with 92.2% recovery. Core 2 was cut from 4231 to 4246 m in the Garn Formation with 65.4% recovery. Core 3 was cut from 4313 to 4341 m in the Garn Formation with 65.2% recovery. MDT fluid samples were taken at 3940 m (gas), 3944 (gas), 3998.3 m (water with oil), 4051.2 m (water), 4295.7 m (gas), 4305.4 (gas), and at 4380.3 m (water with oil)
    The well was permanently abandoned on 17 April 2018 as a gas/condensate discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1435.00
    4537.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3942.0
    3967.8
    [m ]
    2
    4231.0
    4240.8
    [m ]
    3
    4313.0
    4331.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    53.9
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    ECS LDS CMR GR
    4165
    4530
    LWD - ABG GT EWR SOL PWD DIR
    3817
    4230
    LWD - DGR EWR P4PWD
    365
    431
    LWD - DGR EWR P4PWD DIR
    433
    1428
    LWD - DGR EWR P4XBAT PWD DIR
    433
    1427
    LWD - DGR EWR P4XBAT PWD DIR
    1428
    2652
    LWD - DGR SOL EWR P4 ALD CTN PWD
    4230
    4536
    LWD - GPDGR EWR SOL ALD CTN XBAT
    2652
    3817
    MDT GR
    3810
    4051
    MDT GR
    4163
    4380
    MSCT GR
    4224
    4380
    PPC APS CMR GR
    3810
    4165
    PPC MSIP PPC NGIT GR
    3810
    4165
    QAIT APS PPC MSIP GR
    4165
    4538
    QAIT HLDS ECS GR
    3810
    4165
    USIT CBL GR
    3739
    4154
    USIT CBL GR
    3806
    2646
    VSP GR
    4217
    4308
    XLROCK GR
    3993
    4063

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    431.0
    36
    431.0
    0.00
    SURF.COND.
    20
    1409.0
    26
    1428.0
    0.00
    PILOT HOLE
    1427.0
    9 7/8
    1427.0
    1.71
    LOT
    INTERM.
    13 3/8
    2647.0
    17 1/2
    2652.0
    2.01
    LOT
    INTERM.
    9 7/8
    3810.0
    12 1/4
    3817.0
    2.15
    FIT
    LINER
    7
    4163.0
    8 1/2
    4165.0
    2.17
    FIT
    OPEN HOLE
    4536.0
    6
    4536.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    409
    1.49
    17.0
    Kill mud
    990
    1.30
    15.0
    RheGuard
    1050
    1.59
    17.0
    Kill mud
    1076
    1.62
    15.0
    RheGuard
    1076
    1.30
    15.0
    RheGuard
    1301
    1.59
    27.0
    Kill mud
    1428
    1.02
    7.0
    Kill mud
    1428
    1.29
    7.0
    Kill mud
    1428
    1.29
    20.0
    Spud mud
    1480
    1.46
    20.0
    Glydril
    2062
    1.62
    24.0
    Glydril
    2652
    1.62
    24.0
    Glydril
    2652
    1.67
    34.0
    Rheguard
    2660
    1.71
    33.0
    Rheguard
    3072
    1.83
    47.0
    RheGuard
    3314
    1.72
    46.0
    Rheguard
    3465
    1.77
    53.0
    Rheguard
    3636
    1.80
    58.0
    Rheguard
    3817
    1.80
    43.0
    RheGuard
    3817
    1.82
    60.0
    Rheguard
    3842
    1.78
    35.0
    RheGuard
    3907
    1.80
    40.0
    RheGuard
    3958
    1.80
    44.0
    RheGuard
    3958
    1.82
    49.0
    RheGuard
    4077
    1.83
    44.0
    RheGuard
    4110
    1.84
    45.0
    RheGuard
    4140
    1.96
    68.0
    RheGuard
    4140
    1.91
    58.0
    RheGuard
    4162
    1.86
    46.0
    RheGuard
    4162
    1.96
    59.0
    RheGuard
    4165
    1.91
    55.0
    RheGuard
    4170
    1.96
    55.0
    RheGuard
    4422
    1.96
    50.0
    RheGuard
    4422
    1.97
    51.0
    RheGuard
    4530
    1.96
    53.0
    RheGuard
    4536
    1.83
    46.0
    RheGuard
    4536
    1.98
    53.0
    RheGuard