Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
27.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

2/5-10 A

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/5-10 A
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/5-10
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    SH 8903-103 SP. 370/SH 82-411 SP. 484
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Agip AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    769-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    30
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    27.08.1993
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    25.09.1993
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    25.09.1995
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    24.09.2003
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL SHOWS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    65.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4715.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4676.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    34.1
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    162
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SKAGERRAK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 41' 21.66'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 29' 27.32'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6283054.46
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    530071.86
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    2194

  • Wellbore history
    General
    Exploration well 2/5-10 is located in the Central Graben on the Steinbit Terrace. The well was drilled with Late Jurassic sandstone of Oxfordian age, in a combination trap with structural and dip closing elements, as the primary target. Secondary targets were the Middle Jurassic Bryne Formation in the same combination trapping configuration, while the Late Cretaceous Chalk and the Lower Cretaceous Cromer Knoll Group were stratigraphic trap targets. After reaching TD evaluation of the cores and electric logs concluded that a fault had been intercepted within the main Jurassic target, justifying a sidetrack in search of a better pay zone. Well 2/5-10 was therefore plugged back in and well 2/5-10 A sidetracked.
    Operations and results
    Well 2/5-10 was spudded with the semi-submersible installation "Polar Pioneer" on 23 May 1993 and drilled to TD at 4701 m in rocks of the Triassic Smith Bank Formation. The well was drilled with sea water and hi-vis sweeps down to 865 m, with KCl/Polymer mud from 865 m to 4235 m, and with HPHT/Polymer mud from 4235 m to TD. Shallow gas was encountered after drilling the 8 1/2" pilot hole, prior to opening up the hole to 26" and running 20" casing. In order to ensure a good 20" casing cement job without compromising rig safety it was decided to plug back the gas bearing zone and set 20" casing at 509m, 291m shallower than originally planned 800m. To avoid gas migration the cement slurries for the 20" and 13 3/8" were redesigned with gas tight cement (microblock added).
    Top reservoir was encountered at 4582 m, 174 m deeper than prognosis due to complex geology and higher than expected shale interval velocities in the Late Jurassic. The main part of the Late Jurassic sandstone target was removed by faulting, and Triassic strata were encountered 5 m below top reservoir through a fault plane. The Late Jurassic sandstone was highly affected by the faulting, and the reservoir quality was poor. The secondary target Middle Jurassic Bryne Formation was not present. The Smith Bank Formation was encountered 5 m below top reservoir through a fault plane. A small hydrocarbon accumulation was found in the main target Late Jurassic Oxfordian age sandstone. Weak shows were encountered also in the Chalk and in the Vestland Group.
    Two conventional cores were cut from 4575 m in the Late Jurassic sandstone and down to 4591 m in the Smith Bank Formation. Two samples collected at 4594.3 m and 4583.1 m in the Vestland Group during the MDT run contained weak hydrocarbon shows, a discontinuous film of oil in sample #1 and gas traces in sample #2. Because of a failure of the MDT tool's equalization valve, a leakage between the two chambers was considered likely and therefore the location of these hydrocarbon shows is doubtful. However they should more likely be attributed to the top part of the Late Jurassic SST as confirmed by the sample #3 collected in the following RFT run which contained at 4594.3 m (same depth as sample #1) formation water. Only mud filtrate was finally recovered in the sample #4 taken at 4614 m. Well bore 2/5-10 was subsequently plugged back and permanently abandoned on 26 August 1993 as a well with shows.
    Sidestep 2/5-10 A was kicked off from 4306 m in 2/5-10 on 27 August 1993 and was drilled to a total depth of 4715 m in the Triassic Smith Bank Formation. The well was drilled with HPHT/polymer mud from kick-off to TD. The expected reservoir was encountered at 4616 m with a thickness of 57 m and with poor to medium reservoir characteristics. The shows encountered were poor, and no hydrocarbons could be extracted using downhole testing tools. Three conventional cores were cut in the Late Jurassic sandstone from 4612 m to 4640.1 m. Four RFT samples collected at 4619 m, 4624.1 m, 4630 m and 4657 m contained formation water and mud filtrate with only traces of oil. Sidetrack 2/5-10 A was permanently plugged and abandoned on 25 September 1993 as a well with shows.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    4295.00
    4715.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    4612.0
    4620.8
    [m ]
    2
    4621.5
    4631.4
    [m ]
    3
    4631.4
    4640.2
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    27.5
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 4612-4617m
    Core photo at depth: 4612-4620m
    Core photo at depth: 4621-4626m
    Core photo at depth: 4626-4631m
    Core photo at depth: 4631-4631m
    4612-4617m
    4612-4620m
    4621-4626m
    4626-4631m
    4631-4631m
    Core photo at depth: 4631-4636m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    4631-4636m

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.09

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.95
    pdf
    1.44
    pdf
    0.93

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    1.05
    pdf
    50.05

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    AIT BHC MSFL GR AMS
    4219
    4715
    CBL VDL GR
    2100
    4219
    CST GR
    4230
    4704
    LDL CNL NGS FMS AMS
    4219
    4711
    MDT-PO GR
    4617
    4688
    MWD - DIR
    4292
    4318
    MWD - GR DIR
    4318
    4631
    MWD - GR RAR RPD DIR
    4640
    4715
    VSP
    3000
    4715

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    INTERM.
    9 5/8
    4217.0
    12 1/4
    4217.0
    0.00
    LOT
    OPEN HOLE
    4715.0
    8 3/8
    4715.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    4215
    2.06
    39.0
    WATER BASED
    4301
    2.02
    33.0
    WATER BASED
    4312
    2.02
    36.0
    WATER BASED
    4318
    2.04
    36.0
    WATER BASED
    4394
    2.02
    35.0
    WATER BASED
    4430
    2.02
    37.0
    WATER BASED
    4460
    2.02
    37.0
    WATER BASED
    4500
    2.02
    39.0
    WATER BASED
    4598
    2.02
    40.0
    WATER BASED
    4612
    2.02
    39.0
    WATER BASED
    4631
    2.04
    38.0
    WATER BASED
    4640
    2.02
    36.0
    WATER BASED
    4679
    2.06
    35.0
    WATER BASED
    4715
    2.06
    35.0
    WATER BASED

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.22