Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.11.2024 - 09:09
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/3-7

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/3-7
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/3-7
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN0902R12;inline 5238 & crossline 3686
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1474-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    40
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    30.09.2013
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    08.11.2013
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    08.11.2015
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    08.11.2015
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL SHOWS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    INTRA DRAUPNE FM SS
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    116.5
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2100.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2100.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    0.7
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    89
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PERMIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 45' 39.65'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 44' 42.53'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6513618.97
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    485256.08
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7276

  • Wellbore history
    General
    Well 16/3-7 was drilled to appraise the southeast flank of the Joan Sverdrup Field on the Utsira High in the North Sea. It is located approximately 2.8 km southeast of the appraisal well 16/3-5 and approximately 4.2 km south-west of the exploration well 16/3-2. The objectives were to determine the presence and thickness of the Upper Jurassic Draupne shale and Draupne sandstone, to calibrate the seismic interpretation and depth conversion, and find the free-water level. The well should also investigate the reservoir properties in the Permian.
    Operations and results
    Appraisal well 16/3-7 was spudded with the semi-submersible installation Bredford Dolphin on 30 September 2013 and drilled to TD at 2100 m, 12 m into granitic basement rock. A 9 7/8" Pilot Hole section was drilled from Seabed to 711 m. No shallow gas was observed while drilling the pilot hole or while opening it up to 36". No significant problem was encountered in the operations. The well was drilled with seawater and hi-vis sweeps down to 711 m and with Aquadril glycol mud from 711 m to TD.
    The Draupne Formation shale section was encountered at 1937 m and was 13 m thick. The Intra Draupne Formation Sandstone was encountered at 1949 m, which was 12 m deep to prognosis. It was 14 m thick and of excellent quality. Live oil was proved in the uppermost part, but the reservoir was encountered almost completely in the water zone. Sampling indicated that the oil-water contact is at or near 1950 m. Permian carbonates, belonging to the Zechstein Group, were encountered at 1963 m, directly under the Jurassic section. The 36 m thick dolomitic carbonate reservoir has moderate to good reservoir properties. The pressure measurements confirmed the reservoir to be in the same pressure regime as the Johan Sverdrup discovery and the well showed a common water gradient in both the sandstone and Permian carbonates, demonstrating good communication between the two reservoirs. The carbonate reservoir is resting on a two meter thick Kupferschiefer, which in turn rests on 89 m of sandstone and conglomerate belonging to the Rotliegendes Group. Oil shows continued below the thin live oil, throughout the Intra Draupne Formation sandstones, the Zechstein carbonates and a few meters into the Rotliegendes Group.
    A total of 35.7 m core was recovered in two cores from the interval 1935.5 to 1977.5 m (85% overall recovery).The cores captured most of the Draupne Formation shale, parts of the Intra Draupne Formation sandstone reservoir, and 15 m of the Zechstein Group carbonate. The core to log depth shift was +0.3 m for core 1 and -0.32 m for core 2.  RCX fluid samples were taken at 1949.9 m (water and oil), 1950 m (water and trace oil), 1952 m (water), 1952.1 m (water), and 1967 m (water).
    The well was permanently abandoned on 8 November 2013 as an oil appraisal well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    720.00
    2099.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1935.5
    1954.8
    [m ]
    2
    1961.0
    1977.5
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    35.7
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MRCH JAR TTRM DSL CN ZDL MLL RTE
    1821
    2099
    MRCH JAR TTRM DSL FLEX MREX
    1821
    2093
    MRCH JAR TTRM DSL XMACF1 STAR OR
    1821
    2092
    MRCH JAR TTRM GR COR PCOR
    1934
    2029
    MRCH JAR TTRM R6TC IFX RLVP GR
    1949
    1996
    MRCH JAR TTRM R6TC IFX VIT RCX R
    1952
    1952
    MTCH GR GW
    962
    2068
    MWD - GR ECD RES DIR SON
    340
    708
    MWD - PWD GR RES DIR
    1820
    1932
    MWD - RES GR PWD DIR CAL DEN NEU
    708
    1811
    PWD GR RES DIR DEN CAL NEU SON
    1820
    2097

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    221.0
    36
    223.0
    0.00
    SURF.COND.
    20
    704.0
    26
    711.0
    1.75
    FIT
    PILOT HOLE
    711.0
    9 7/8
    711.0
    0.00
    OPEN HOLE
    716.0
    17 1/2
    716.0
    0.00
    INTERM.
    9 5/8
    1820.0
    12 1/4
    1828.0
    1.73
    LOT
    OPEN HOLE
    2100.0
    8 1/2
    2100.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    158
    1.03
    100.0
    Water Based
    224
    1.04
    100.0
    Water Based
    704
    1.13
    21.0
    Water Based
    1732
    1.40
    24.0
    Water Based
    1832
    1.40
    16.0
    Water Based
    2100
    1.15
    24.0
    Water Based
    2100
    1.15
    25.0
    Water Based