Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
27.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

2/4-22 S

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/4-22 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/4-22
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Inline: 7738 - Xline:19082 - 3D survey: VGCNS05Z12
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1537-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    166
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    10.09.2014
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    22.02.2015
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    22.02.2015
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    22.02.2017
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    22.02.2017
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    PERMIAN
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    ROTLIEGEND GP
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    MIDDLE JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    BRYNE FM
    3rd level with HC, age
    Age of lithostratigraphic unit, 3rd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    LATE JURASSIC
    3rd level with HC, formation
    Name of lithostartigraphic unit, 3rd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    ULA FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    48.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    67.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4889.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4882.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    5.3
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    173
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PERMIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ROTLIEGEND GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 42' 58.2'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 10' 2.98'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6285944.41
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    510252.77
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7535
  • Wellbore history

    General
    Well 2/4-22 S was drilled to test the Romeo on the Hidra High adjacent to the King Lear discovery in the North Sea. The primary objective was to prove commercial accumulations of recoverable hydrocarbons within Sandstone of the Rotliegendes Group.
    Operations and results
    Wildcat well 2/4-22 S was spudded with the jack-up installation Mærsk Galant on 10 September 2014 and drilled to TD at 4889 m in the Permian Rotliegendes Group. The 8 1/2" section was drilled under HPHT procedures. No significant problem was encountered in the operations. The well was drilled with seawater down to 298 m, with Glydril mud from 298 m to 1001 m, with Versatec oil based mud from 1001 m to 4358 m, and with WARP oil based mud from 4358 m to TD.
    Hydrocarbons were found in the Jurassic Ula and Bryne Formations and in the Permian Rotliegendes Group, Auk Formation Equivalent. The hydrocarbons in all reservoir correspond to light oil (density of 0.6 g/cm3). Two source rock sequences are penetrated in the well: the Late Jurassic Mandal-Farsund formations and high-TOC carbonaceous shales of the Bryne Formation. No Triassic rocks were seen in the well. No oil shows above the oil based mud were recorded. High gas response was recorded when drilling the organic rich shales in the Mandal and Farsund formations.
    No cores were cut in the well. Formation fluid samples were acquired in the reservoir using the MDT. Depth correlation and sampling operations were difficult due to the well conditions and failure of the hydraulic units in the MDT strings. Oil was sampled at 4628 m, 4630.8 m and 4678.5 m. Water was sampled at 4875.6 m.
    The well was permanently abandoned on 22 February 2015 as an oil discovery.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    310.00
    4889.50
  • Oil samples at the Norwegian Offshore Directorate

    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    MDT
    0.00
    0.00
    OIL
    YES
    MDT
    0.00
    0.00
    OIL
    YES
    MDT
    0.00
    0.00
    OIL
    YES
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    ABG EWR - P4 DGR PWD DIR
    1001
    3411
    CBL USIT
    3485
    4247
    DGR EWR - P4 PWD DIR
    298
    1001
    DGR EWR - P4 PWD DIR
    3411
    4358
    DGR EWR - P4 PWD GEOTAP ALD CTN
    4362
    4826
    DGR EWR - P4 PWD GEOTAP DIR
    0
    0
    GR CMR
    4536
    4885
    GR MDT
    4600
    4872
    GR MDT IFA MRMS
    4596
    4710
    GR MDT IFA MRMS
    4628
    4680
    GR MDT IFA MRMS
    4678
    4875
    GR MDT IFA MRMS
    4830
    4874
    GR VSP
    2437
    4890
    GR XLROCK
    4625
    4846
    HLDS APS ECS GR
    4350
    4890
    QAIT ILE DOBMI PPC MSIP PPC
    4300
    4889
    USIT CBL
    900
    3297
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    289.1
    36
    298.0
    1.20
    FIT
    SURF.COND.
    20
    454.4
    24
    467.0
    1.40
    FIT
    LINER
    16
    1001.0
    20
    1001.0
    1.68
    FIT
    1001.0
    1001.0
    1.72
    FIT
    INTERM.
    13 5/8
    3312.0
    17 1/2
    3322.5
    1.90
    FIT
    PROD.
    9 7/8
    4349.4
    12 1/4
    4358.0
    2.25
    FIT
    4349.4
    4358.0
    2.23
    FIT
    4349.5
    4358.0
    2.15
    LOT
    OPEN HOLE
    4889.5
    8 1/2
    4889.5
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    0
    1.45
    25.0
    Glydril
    0
    2.04
    52.0
    WARP (Oil Based)
    152
    1.62
    40.0
    Versatec
    298
    1.45
    25.0
    Glydril
    304
    1.54
    38.0
    Versatec
    306
    1.10
    11.0
    Glydril
    318
    1.54
    38.0
    Versatec
    325
    1.10
    12.0
    Glydril
    367
    1.53
    40.0
    Versatec
    375
    1.13
    18.0
    Glydril
    430
    1.10
    14.0
    Glydril
    460
    1.20
    15.0
    Glydril
    637
    1.15
    13.0
    Glydril
    1000
    1.18
    12.0
    Glydril
    1867
    1.66
    51.0
    Versatec
    2591
    1.66
    62.0
    Versatec
    3018
    1.66
    50.0
    Versatec
    4080
    1.72
    43.0
    Versatec
    4200
    2.04
    44.0
    WARP (Oil Based)
    4220
    1.50
    28.0
    Versatec
    4230
    2.04
    40.0
    WARP (Oil Based)
    4263
    1.75
    42.0
    Versatec
    4291
    2.02
    45.0
    WARP (Oil Based)
    4318
    1.75
    44.0
    Versatec
    4319
    2.02
    42.0
    WARP (Oil Based)
    4358
    1.79
    44.0
    Versatec
    4358
    2.04
    45.0
    Versatec
    4358
    1.58
    25.0
    Versatec
    4400
    2.06
    44.0
    WARP (Oil Based)
    4768
    2.02
    39.0
    WARP (Oil Based)
    4804
    2.16
    37.0
    WARP (Oil Based)
    4826
    2.08
    32.0
    WARP (Oil Based)
    4837
    2.02
    37.0
    WARP (Oil Based)
    4889
    2.04
    40.0
    WARP (Oil Based)
    4890
    2.06
    28.0
    WARP (Oil Based)