Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
25.12.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6507/3-13

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/3-13
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/3-13
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ST11M01 Inline: 5513 Xline: 4720
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Equinor Energy AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1757-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    36
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    27.04.2019
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    01.06.2019
    Plugged date
    Date when plugging operations was finished, as reported by the operator to the Norwegian Offshore Directorate through DDRS (Daily Drilling Reporting System).
    01.06.2019
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    07.06.2019
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    01.06.2021
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    10.11.2021
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    LYSING FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY CRETACEOUS
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    LANGE FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    40.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    368.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3420.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3420.0
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LYR FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    65° 59' 26.44'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 44' 43.02'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7319626.15
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    443032.06
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8720
  • Wellbore history

    General
    Well 6507/3-13 was drilled to test the Snadd Outer Outer and Black Vulture prospects on the Dønna Terrace in the Norwegian Sea. The primary objective was to prove mobile gas in the Snadd Outer Outer prospect (Lysing Formation). The secondary objective was to prove hydrocarbon presence in the Black Vulture prospect (Lange Formation). Planned TD was in the Spekk Formation
    Operations and results
    Wildcat well 6507/3-13 was spudded with the semi-submersible installation Transocean Spitsbergen on 27 April 2019 and drilled to TD at 3420 m in the Early Cretaceous Lyr Formation. Operations proceeded without significant problems however, after plugging back for side-tracking severe losses occurred leading to permanent abandonment and cancelling of the planned side-track 6507/3-13 A. Also, a lower than prognosed formation integrity on the 9 5/8“ shoe prevented to set TD in the Spekk Formation. The well was drilled with seawater and hi-vis pills down to 1302 m and with XP-07 oil-based mud from 1302 m to TD.
    Top of primary target Lysing Formation sandstone (Snadd Outer Outer) was penetrated at 2834 m. It was 26 m thick and gas-bearing down to a gas-water contact at ca 2841 m. Top of secondary target intra-Lange Formation sandstones (Black Vulture) was penetrated at 3171 m. The Black Vulture consisted of relatively thin sandstones with hydrocarbon indications interbedded in claystone. It extended down to 3317 m with a main reservoir sand from 3255 to 3280 m. Oil was proven in a 4-meter thick interval above the main reservoir interval. The main reservoir was hydrocarbon bearing, however with a complex fluid distribution. Oil was sampled above a water zone. Below this an oil sample was acquired, and in the deepest sand gas/condensate was sampled. No contacts were established in the Lange sandstones.
    Oil shows were recorded only in the hydrocarbon bearing target reservoirs.
    Two cores were cut. Core 1 was cut from 2840 to 2886 m in the Lysing Formation and underlying Lange claystone with 102% recovery. Core 2 was cut from 3258.85 to 3273 m in the Lange Formation sandstones with 95.8% recovery. MDT fluid samples were taken at 2838 m (gas), 2858.9 m (water), 3193.12 m (oil), 3260.2 m (oil), 3263.87 m (water), 3271.62 m (oil), and 3277.32 m (gas condensate).
    The well was permanently abandoned on 22 May 2019 as an oil and gas discovery.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1310.00
    3420.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2840.0
    2886.0
    [m ]
    2
    3258.9
    3273.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    60.2
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MDT CMR
    2810
    3360
    MSCT
    3188
    3260
    MSIP PEX XPT
    1297
    2743
    MWD - ABG DGR EWR M5 PWD PCDC
    473
    1302
    MWD - DGR ADR AGR PWD PCDC
    2746
    3420
    MWD - DGR EWR P4 PWD PCDC
    1302
    2746
    VSI4
    368
    3409
    XLR
    2834
    3279
    XPT PEX CMR
    2690
    3420
    ZAIT MSIP NEXT PEX
    2690
    3420
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    36
    470.0
    42
    470.0
    0.00
    SURF.COND.
    13 3/8
    1297.0
    17 1/2
    1297.0
    1.58
    FIT
    INTERM.
    9 5/8
    2740.0
    12 1/4
    2740.0
    1.82
    FIT
    OPEN HOLE
    3420.0
    8 1/2
    3420.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    408
    1.35
    11.0
    Spud Mud
    468
    1.03
    1.0
    Seawater
    473
    1.35
    14.0
    Spud Mud
    537
    1.03
    1.0
    Seawater
    1302
    1.03
    1.0
    Seawater
    1302
    1.35
    14.0
    Spud Mud
    1403
    1.54
    22.0
    XP-07
    1403
    1.45
    16.0
    XP-07
    1550
    1.67
    24.0
    XP-07
    1550
    1.51
    20.0
    XP-07
    2746
    1.51
    20.0
    XP-07
    2746
    1.67
    21.0
    XP-07
    2752
    1.67
    20.0
    XP-07
    3268
    1.67
    22.0
    XP-07
    3268
    1.68
    21.0
    XP-07
    3420
    1.67
    24.0
    XP-07
  • Thin sections at the Norwegian Offshore Directorate

    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    3260.55
    [m ]
    3261.45
    [m ]
    3262.25
    [m ]
    3263.25
    [m ]
    3263.75
    [m ]
    3265.65
    [m ]
    3267.78
    [m ]
    3269.35
    [m ]
    3270.25
    [m ]
    3271.25
    [m ]