Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
11.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

1/6-1

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    1/6-1
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    1/6-1
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    A/S Norske Shell
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    75-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    140
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    10.07.1972
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    26.11.1972
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    26.11.1974
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    02.04.2007
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS/CONDENSATE
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    PALEOCENE
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    EKOFISK FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    LATE CRETACEOUS
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    TOR FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    34.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    69.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4822.0
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    166
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE PERMIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ZECHSTEIN GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 38' 2.4'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 59' 50.3'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6276785.58
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    499834.71
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    239

  • Wellbore history
    General
    Wildcat well 1/6-1 is located ca 15 km northwest of the Ekofisk Field in the southern Norwegian North Sea. It was drilled in a crestal position on a large chalk structure shared between Norske Shell's block l/6 and Phillips' block 2/4, the Ekofisk block. Phillips participated in drilling this well on a 50/50 basis. The primary objective was to investigate Danian and Maastrichtian chalk prospects. Secondary objective was to evaluate possible sand developments in the Paleocene and the Lower Cretaceous or older units. Planned total depth was 4572 m (1500 ft).
    Operations and results
    Well 1/6-1 was spudded with the jack-up installation Zapata Nordic on 10 July 1972 and drilled to TD at 4822 m in the Late Permian Zechstein Group. No major technical problems were encountered in the operations and the drilling of this deep well was within the prognosed time schedule. The drill string stuck at 228 m. After working the string and spotting pipe-free/diesel the string came loose. Some highly porous limestone intervals (1 - 8 m thick) resulted in lost circulation problems. The pipe stuck at 3456 m, but was freed after spotting with pipe-free/diesel. The well was drilled with seawater down to 448 m, with seawater/lignosulphonate and a shale inhibitor (shalock) from 448 m to 1586 m, and with seawater/lignosulphonate/ligcon (caustisized lignite) from 1586 m to TD.
    Reservoir development was encountered only in the Chalk Formations, with hydrocarbon-bearing intervals being developed in both the Danian and Late Cretaceous. Four hydrocarbon-bearing intervals were encountered and tested within the Chalk, but only one zone in the Maastrichtian (Tor Formation), yielded commercial flows of gas and condensate. Reservoir developments in the Danian (Ekofisk Formation) and earlier Maastrichtian (Hod Formation) were found to be considerably less favourable in l/6-l than in the adjacent Ekofisk and West Ekofisk field. The Early Cretaceous (Valanginian) was found resting directly on Late Permian Zechstein evaporite at 4800 m.
    Two cores were cut in the intervals 3177.5 to 3189.7 m and 4604.6 to 4610.7 m. No fluid samples were taken on wire line.
    The well was permanently abandoned on 26 November as a gas/condensate discovery.
    Testing
    Based on results from logging four zones were perforated and tested.
    Zone 1 was perforated from 3821 to 3833 m in the (DST 1, Hod Formation). The test produced only a small quantity of gas and traces of light crude/acid emulsion.
    Zone 2 was perforated in the intervals 3653.6 - 3650.6 m, 3646.0 - 3647.5 m, and 3621 - 3632.2 m (DST 2, Hod Formation). The test produced ca 65 Sm3 fluid (50% oil) /day.
    Zone 3 was perforated from 3270.5 m to 3279.6 m (DST 3,Tor Formation). The test produced at maximum 451 Sm3 oil and 480400 Sm3 gas /day. The rates decreased during the test and the GOR changed accordingly from 1070 to 1330 Sm3/Sm3. Oil gravity was 46.8 deg API. Maximum down hole temperature was 135 deg C.
    Zone 4 was perforated from 3152.9 m to 3158.9 m (DST 4, Ekofisk Formation). After acidization the test produced 24 Sm3 oil, 52000 Sm3 gas, and 29 Sm3 water / day. Oil gravity was 46.3 deg API, gas gravity was 0.745 (air = 1), and GOR was 2180 Sm3/Sm3.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    169.16
    4818.89

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    10425.0
    10463.0
    [ft ]
    2
    15106.0
    15123.0
    [ft ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    16.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    15107.0
    [ft]
    DC
    HRS

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    DST4
    3153.00
    3159.00
    20.11.1972 - 00:00
    YES

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    102
    1795
    2942
    2942
    2953
    2995
    3106
    3144
    3144
    3247
    3566
    4144
    4800

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.39
    pdf
    0.57
    pdf
    0.97

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    19.61

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    3820
    3833
    0.0
    2.0
    3621
    3633
    12.0
    3.0
    3271
    3280
    25.4
    4.0
    3153
    3159
    25.4
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    2.0
    3.0
    4.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    2.0
    32
    16980
    0.832
    3.0
    352
    466893
    0.794
    0.690
    4.0
    24
    51959
    0.796
    0.745

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    BHC
    450
    4591
    BHC-C
    4511
    4816
    CAL
    449
    1591
    CBL
    1402
    3146
    CBL
    2804
    4214
    CDM AP
    1583
    4603
    CDM FP
    1583
    4598
    CDM PP
    3146
    4602
    CNL
    2560
    4222
    DL
    3148
    4220
    FDC GR
    2560
    4222
    GR
    61
    488
    IES
    450
    4819
    ML MLL
    3146
    4220
    PML
    3146
    4220
    TS
    113
    1539
    VELOCITY
    0
    0

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    169.0
    36
    169.0
    0.00
    LOT
    SURF.COND.
    20
    448.0
    26
    455.0
    0.00
    LOT
    INTERM.
    13 3/8
    1586.0
    17 1/2
    1591.0
    0.00
    LOT
    INTERM.
    9 5/8
    3149.0
    12 1/4
    3175.0
    0.00
    LOT
    LINER
    7
    4220.0
    8 1/2
    4226.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    165
    0.99
    seawater
    178
    1.21
    waterbased
    455
    1.20
    seawat/lign
    823
    1.22
    seawat/lign
    1591
    1.62
    seawat/lign
    2761
    1.73
    seawat/lign
    3175
    1.73
    seawat/lign
    3365
    1.73
    seawat/lign
    3564
    1.73
    seawat/lign
    4225
    1.75
    seawat/lign
    4602
    1.90
    seawat/lign
    4821
    1.73
    seawat/lign

  • Thin sections at the Norwegian Offshore Directorate
    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    15117.00
    [ft ]