Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
11.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/1-10

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-10
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-10
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    :LMMQ16 innline 36106 &c crossline LMMQ16 128346
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1191-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    85
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    13.11.2008
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    05.02.2009
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    05.02.2011
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    05.02.2011
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    NO GROUP DEFINED
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    110.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2151.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2151.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    1.3
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    89
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    NO GROUP DEFINED
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 51' 14.61'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 16' 30.85'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6524177.97
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    458183.01
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    5879

  • Wellbore history
    General
    Well 16/1-10 was drilled on the eastern margin of the South Viking Graben on the south-western part of the Utsira High in the North Sea. It was drilled to confirm the northern extent of the Luno oil discovery in Early Jurassic conglomerates made by well 16/1-8. The oil-water contact at 1965 m TVD RKB should be confirmed and a production test of the clean sand facies and conglomeratic facies should be conducted.
    Operations and results
    Appraisal well 16/1-10 was spudded with the semi-submersible installation 16/1-10 on 13 November 2008 and drilled to TD at 2151 m in conglomeratic sandstones of Early Jurassic age. As the site survey revealed a number of possible shallow gas zones the well started with a 9 7/8" pilot hole to check for shallow gas down to 400 m, TD of planned 26" section. No gas was seen in this interval. Due to a leak in the 20" casing the casing programme was significantly revised, with 13 3/8" casing set at 589 m, above a potential shallow gas zone at 634 m, and the 12 1/4" hole was drilled down into top Shetland Group. This slimmer-than-planned hole turned out to give easier drilling than in the previous well on the prospect (16/8-1). The amount of down time was however comparatively large, due mainly to wait-on-weather. Additional coring also added to a longer than planned time for this well. The well was drilled with seawater and hi-vis bentonite sweeps down to 411 m, with KCl/glycol enhanced mud from 411 m to 1860 m, and with Performadril water based mud with 5% glycol from 1860 m to TD.
    The Utsira, Skade and Grid sandstone formations were penetrated by the well, all water bearing. The top of the Jurassic reservoir sequence was encountered at 1898 m (1872.9 m TVD MSL), 11.4 m TVD deeper than prognosed. The reservoir sequence was composed of oil bearing sandstones and conglomerates with an OWC at 1965 m. No gas cap was observed on the logs or could be inferred from the production testing. The first hydrocarbon shows in well 16/1-10 were observed in the core chips collected in the Shetland Group limestones that overlie the reservoir. Generally good hydrocarbon shows were observed in the reservoir from 1898 m down to 1911 m. From 1911 to 1928 m the hydrocarbon shows became more patchy due to widespread argillaceous infilling of the pore spaces within the sandstone matrix. More consistent shows were present in the interval from 1929 to 1940 m but below this depth only intermittent shows were observed.
    A total of 7 cores were cut from 1868 to 1987.5 m. The first two cores were cut entirely within the Shetland Group. The third core penetrated top reservoir at 1898 m. The entire hydrocarbon bearing part of the reservoir interval was cored with the last core penetrating the oil-water contact. Four wire line logging runs were made including one MDT run for samples and pressures. Oil samples were taken at 1899.6 m and 1933.1 m and a water sample was taken at 2024.9 m. Fluid gradients were established for both water and oil zones, indicating an oil-water contact at 1965 m TVD, confirming the contact extrapolated in well 16/1-8.
    The well was permanently abandoned on 5 February as an oil appraisal.
    Testing
    Two Jurassic intervals were production tested. DST 1A was performed in the interval 1919.92 to 1958.11 m in the conglomeratic sandstone facies.
    DST 1B was performed in the interval 1897.00 to 1909.79 m in addition to 1919.92 to 1958.11 .The test rate was 338 Sm3 oil per day and 35500 Sm3 gas per day through a 12,7 mm choke.
    Maximum temperature recorded in the tests was 82.1 deg C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    420.00
    2151.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1868.0
    1873.0
    [m ]
    2
    1873.0
    1891.0
    [m ]
    3
    1891.0
    1901.4
    [m ]
    4
    1901.5
    1911.6
    [m ]
    5
    1914.6
    1934.0
    [m ]
    6
    1934.0
    1958.9
    [m ]
    7
    1960.5
    1987.6
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    114.9
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    0.00
    0.00
    YES

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.28

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    txt
    0.00
    txt
    0.60

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    1920
    1958
    25.4
    2.0
    1897
    1910
    12.7
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    16.200
    80
    2.0
    6.000
    17.000
    82
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    2
    2.0
    338
    35500
    105

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR ADT ECS HNGS GR ACTS ECRD
    1852
    2150
    FMI PPC MSIP PPC GR ACTS ECRD
    1852
    2150
    HRLA PEX GR ACTS ECRD
    1852
    2143
    MRPO MRPQQ MRPS LFA MRCS GR
    1898
    2033
    MWD LWD - GR REMP
    123
    1862
    MWD LWD - GR REMP DEN NEU AC
    1850
    2145
    PGGT MH 22
    1726
    1847
    USIT CBL GR ACTS CCL ECRD
    1680
    2100

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    211.0
    36
    211.0
    0.00
    LOT
    SURF.COND.
    20
    404.0
    26
    411.0
    1.49
    LOT
    INTERM.
    13 3/8
    589.0
    17 1/2
    595.0
    2.05
    LOT
    INTERM.
    9 5/8
    1854.0
    12 1/4
    1860.0
    1.38
    LOT
    LINER
    7
    2149.0
    8 1/2
    2151.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    174
    1.07
    Spud Mud
    212
    1.07
    Spud Mud
    285
    1.17
    14.0
    Performadril
    411
    1.25
    Spud Mud
    595
    1.17
    18.0
    KCl/GEM
    1660
    1.35
    24.0
    Performadril
    1872
    1.20
    32.0
    PERFORMADRIL
    1915
    1.20
    27.0
    PERFORMADRIL
    1933
    1.20
    28.0
    PERFORMADRIL
    1983
    1.21
    31.0
    PERFORMADRIL
    2151
    1.20
    NaCl Brine
    2151
    1.21
    50.0
    PERFORMADRIL

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    PDF
    0.21