Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
05.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/1-31 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-31 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-31
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN16201 inline 1421 crossline 2347
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1748-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    62
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    10.03.2019
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    10.05.2019
    Plugged date
    Date when plugging operations was finished, as reported by the operator to the Norwegian Offshore Directorate through DDRS (Daily Drilling Reporting System).
    10.05.2019
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    10.05.2021
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    10.11.2021
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE TRIASSIC
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    111.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2220.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2148.0
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 51' 47.5'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 18' 12.35'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6525178.00
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    459820.31
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8655

  • Wellbore history
    General
    Well 16/1-31 S was drilled to test the Jorvik prospect on the Utsira High, about 4 kilometres northeast of the Edvard Grieg platform in the North Sea. The primary objective was to prove oil in conglomerates from the Triassic Age in an extension of the Edvard Grieg basin toward the east.
    Operations and results
    Appraisal well 16/1-31 S was spudded with the semi-submersible installation Leiv Eiriksson on 10 March 2019 and drilled to TD at 2220 m in conglomerates of indeterminate Triassic to Permian age. Operations proceeded without significant problems. The well was drilled with seawater and hi-vis pills down to 602 m and with Polymer water-based mud from 602 m to TD.
    The well penetrated the Early Cretaceous Åsgard Formation directly overlying top of the target reservoir at 1938 m (1866.4 m TVD). The reservoir contained an oil column of about 30 metres in conglomerates and conglomeratic sandstones, presumably of Triassic Age and with generally poor reservoir quality. There was around one metre of sandstone of good quality in the upper part of the reservoir section. The oil/water contact was not proven. Pressure measurements showed that the area is in communication with the Edvard Grieg field. The reservoir pressure was depleted 9-10 bar compared to the Edvard Grieg before start of production.
    Below 1968 m and down to 2028 m shows are described on cores as: faint to moderate odour, 40% patchy weak, dark yellow direct fluorescence, slow blooming good bluish white cut fluorescence, 30% moderately, cream fluorescent residue. Patchy shows (cut and fluorescence) was described on sidewall cores down to 2176.5 m.
    Three cores were cut in the interval 1940 to 2034.5 m. Recoveries were 100%, 97.7%, and 99.3% in cores 1, 2 and 3 respectively. MDT fluid samples were taken at 1938.61 m (oil) and 1964.57 m (oil).
    The well was plugged back for side-tracking (16/1-31 A) on 10 May 2019. The well was initially classified as a wildcat but has been reclassified as an oil appraisal well.
    Testing
    A drill stem test was conducted from perforations in the interval 1945.15 to 2001.9 m. The test produced oil and gas at relatively low rates, between 21 to 24 Sm3 oil and 4900 to 8000 Sm3 gas /day through a 26/64” choke. The GOR was between 233 and 333 Sm3/Sm3, but this was likely not representative due to slugging. The temperature at gauge depth 1920.9 m was 80.2°C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    610.00
    2220.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1940.0
    1967.2
    [m ]
    2
    1967.2
    2004.1
    [m ]
    3
    2005.0
    2034.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    93.4
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    MDT
    0.00
    0.00
    YES
    MDT
    1939.57
    0.00
    OIL
    17.04.2019 - 00:00
    NO
    MDT
    1913.60
    0.00
    OIL
    16.04.2019 - 00:00
    NO

  • Lithostratigraphy

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    1945
    2002
    9.5
    2.0
    1945
    2002
    9.5
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    9.400
    2.0
    8.400
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    21
    4900
    233
    2.0
    24
    8000
    333

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    FMI MSIP GR
    100
    1912
    FMI MSIP GR
    1500
    2221
    HRLA PEX HNGS GR
    1910
    2221
    MDT GR
    1938
    2080
    MWD - GR PWD RES DIR AC
    179
    599
    MWD - INC GR RES PWD CAL DEN N A
    1335
    2220
    MWD - PWD DIR
    221
    590
    MWD - PWD GR
    147
    192
    MWD - RES PWD GR DIR AC
    595
    1334
    XLR GR
    1376
    1600
    XLR GR
    1400
    1905
    XLR GR
    1918
    2199
    XPT NEXT CMR
    1910
    2221

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    203.1
    36
    203.1
    0.00
    SURF.COND.
    20
    595.0
    26
    602.0
    1.50
    FIT
    PILOT HOLE
    602.0
    9 7/8
    602.0
    0.00
    INTERM.
    13 3/8
    1337.6
    17 1/2
    1345.0
    1.88
    LOT
    LINER
    9 5/8
    1910.2
    12 1/4
    1911.0
    1.65
    LOT
    LINER
    7
    2219.6
    8 1/2
    2220.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    203
    1.05
    1.0
    PHB Sweep
    203
    1.50
    1.0
    KCl/Polymer/GEM
    570
    1.30
    21.0
    HP WBM
    602
    1.30
    15.0
    HP WBM
    602
    1.04
    1.0
    PHB Sweep
    602
    1.50
    17.0
    KCl/Polymer/GEM
    610
    1.30
    16.0
    HP WBM
    1020
    1.30
    20.0
    HP WBM
    1345
    1.30
    19.0
    HP WBM
    1345
    1.45
    23.0
    HP WBM
    1399
    1.45
    25.0
    HP WBM
    1911
    1.12
    19.0
    HP WBM
    1911
    1.45
    30.0
    HP WBM
    1930
    1.12
    16.0
    HP WBM
    2035
    1.12
    17.0
    HP WBM
    2035
    1.14
    13.0
    HP WBM
    2080
    1.12
    14.0
    HP WBM
    2220
    1.30
    21.0
    HP WBM
    2220
    1.13
    1.0
    KCl Brine
    2220
    1.12
    11.0
    HP WBM