Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

30/11-12 A

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/11-12 A
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/11-12
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    MC3D-NVG05STZ12-PSDM-KIR-FULLSTK-FIN-D:Inline 1157.crossline 2174
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1615-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    18
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    04.05.2016
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    20.05.2016
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    20.05.2018
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    20.05.2018
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    29.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    110.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4173.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3638.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    42.2
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    132
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIDDLE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    TARBERT FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 5' 0.26'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 35' 36.16'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6660925.43
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    477375.63
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7922
  • Wellbore history

    Wellbore history
    General
    Well 30/11-12 A is a geological sidetrack to 30/11-12 S, the Askja SE discovery well on the Eastern flank of the Fensal Sub-Basin in the North Sea. The well is situated two kilometres south of the 30/11-9 A (Askja East) discovery, and about 35 km southwest of the Oseberg Sør facility. The objective of 30/11-12 A was to clarify the hydrocarbon-water contact downflank on the Askja SE structure.
    Operations and results
    Appraisal well 30/11-12 A was kicked off at 1228 m in 30/11-12 S on 4 May 2016. It was drilled with the semi-submersible installation Songa Delta to TD at 4173 m (3638 m TVD) m in the Middle Jurassic Tarbert Formation. No significant problem was encountered in the operations. The well was drilled with XP-07 oil based mud from kick-off to TD.
    Top Tarbert Formation came in at 3961 m (3429 m TVD), 40 m deep to prognosis. The well, including the Tarbert Formation, was dry without shows. Valid pressure points in sands in the Tarbert Formation all lie on a common water gradient.
    No cores were cut. MDT water samples were taken at 3975.9 m.
    The well was permanently abandoned on 20 May 2016 as a dry appraisal well.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1240.00
    4173.00
  • Palynological slides at the Norwegian Offshore Directorate

    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    3580.0
    [m]
    DC
    PETROSTR
    3590.0
    [m]
    DC
    PETROS
    3600.0
    [m]
    DC
    PETROS
    3610.0
    [m]
    DC
    PETROS
    3620.0
    [m]
    DC
    PETROS
    3630.0
    [m]
    DC
    PETROS
    3640.0
    [m]
    DC
    PETROS
    3650.0
    [m]
    DC
    PETROS
    3660.0
    [m]
    DC
    PETROS
    3670.0
    [m]
    DC
    PETROS
    3680.0
    [m]
    DC
    PETROS
    3690.0
    [m]
    DC
    PETROS
    3700.0
    [m]
    DC
    PETROS
    3710.0
    [m]
    DC
    PETROS
    3720.0
    [m]
    DC
    PETROS
    3730.0
    [m]
    DC
    PETROS
    3740.0
    [m]
    DC
    PETROS
    3750.0
    [m]
    DC
    PETROS
    3760.0
    [m]
    DC
    PETROS
    3770.0
    [m]
    DC
    PETROS
    3780.0
    [m]
    DC
    PETROS
    3790.0
    [m]
    DC
    PETROS
    3800.0
    [m]
    DC
    PETROS
    3810.0
    [m]
    DC
    PETROS
    3820.0
    [m]
    DC
    PETROS
    3830.0
    [m]
    DC
    PETROS
    3840.0
    [m]
    DC
    PETROS
    3848.0
    [m]
    DC
    PETROS
    3860.0
    [m]
    DC
    PETROS
    3870.0
    [m]
    DC
    PETROS
    3880.0
    [m]
    DC
    PETROS
    3890.0
    [m]
    DC
    PETROS
    3900.0
    [m]
    DC
    PETROS
    3910.0
    [m]
    DC
    PETROS
    3920.0
    [m]
    DC
    PETROS
    3930.0
    [m]
    DC
    PETROS
    3940.0
    [m]
    DC
    PETROS
    3950.0
    [m]
    DC
    PETROS
    3959.0
    [m]
    DC
    PETROS
    3962.0
    [m]
    DC
    PETROS
    3971.0
    [m]
    DC
    PETROS
    3980.0
    [m]
    DC
    PETROS
    3989.0
    [m]
    DC
    PETROS
    3998.0
    [m]
    DC
    PETROS
    4007.0
    [m]
    DC
    PETROS
    4016.0
    [m]
    DC
    PETROS
    4025.0
    [m]
    DC
    PETROS
    4034.0
    [m]
    DC
    PETROS
    4043.0
    [m]
    DC
    PETROS
    4052.0
    [m]
    DC
    PETROS
    4061.0
    [m]
    DC
    PETROS
    4070.0
    [m]
    DC
    PETROS
    4079.0
    [m]
    DC
    PETROS
    4088.0
    [m]
    DC
    PETROS
    4097.0
    [m]
    DC
    PETROS
    4106.0
    [m]
    DC
    PETROS
    4115.0
    [m]
    DC
    PETROS
    4124.0
    [m]
    DC
    PETROS
    4133.0
    [m]
    DC
    PETROS
    4142.0
    [m]
    DC
    PETROS
    4151.0
    [m]
    DC
    PETROS
    4160.0
    [m]
    DC
    PETROS
    4169.0
    [m]
    DC
    PETROS
    4173.0
    [m]
    DC
    PETROS
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    AIT PEX HNGS ECS
    3846
    4177
    MDT
    3971
    4156
    MWD - ARCVIS GR RES APWD DIR
    1228
    4173
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    175.0
    36
    176.0
    0.00
    1228.0
    1228.0
    1.57
    FIT
    LINER
    9 5/8
    3846.0
    12 1/4
    3848.0
    1.55
    FIT
    OPEN HOLE
    4173.0
    8 1/2
    4173.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1371
    1.48
    20.0
    XP-07
    1727
    1.48
    24.0
    XP-07
    1971
    1.48
    22.0
    XP-07
    2520
    1.48
    25.0
    XP-07
    3465
    1.48
    27.0
    XP-07
    3848
    1.26
    9.0
    XP-07
    3848
    1.48
    25.0
    XP-07
    4015
    1.26
    11.0
    XP-07
    4173
    1.26
    9.0
    XP-07