Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

25/5-3

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/5-3
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/5-3
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    EL 8902 - 111 SP 830
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Elf Petroleum Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    627-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    59
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    27.01.1990
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    26.03.1990
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    26.03.1992
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    15.08.2008
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS/CONDENSATE
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    HUGIN FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    22.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    118.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2900.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2900.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    1.1
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    94
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    NO GROUP DEFINED
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    59° 35' 8.01'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 37' 46.94'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6605469.05
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    479087.08
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    1488

  • Wellbore history
    Wildcat well 25/5-3 is located on the Utsira High, ca 15 km south-south-east of the Frøy Field in the North Sea. The main target was a prospect at Middle Jurassic level. Early Palaeocene sandstones and Early Jurassic Statfjord sandstones were secondary targets. For all targets the expected fluid was oil.
    Operations and results
    Well 25/5-3 was spudded with the semi-submersible installation West Vanguard on 27 January 1990 and drilled to TD at 2900 m in the Triassic Group. No significant problems were encountered in the operations. The top hole down to 200 m was drilled with sea water. The reservoirs were drilled with sea water / KCl / polymers.
    Two massive, clean, sandstone intervals (22 and 61 m) were found between 2211 and 2310 m in the basal Tertiary (Ty Formation). The sands were separated by a shaly layer and were water bearing (no shows at all). The Vestland Group reservoir was 69 m thick (2384-2453 m) and consisted of sandstones, generally fine grained, clean, occasionally micaceous/shaly and calcareous cemented. It was gas-bearing at top (gas column 42 m). The gas-water contact was found at 2426 m, based on logs and RFT pressures. Oil shows were observed on two sidewall cores at 2425 and 2428.7 m, but the amount of hydrocarbons (Iatroscan) obtained by geochemical studies were very low. No evidence of an oil zone could be seen on the RFT plot. The upper 21 m had very good reservoir qualities with porosities above 25%, and average horizontal and vertical permeabilities of Kh = 363 mD and Kv = 236 mD, respectively. The basal part had porosities around 20 %. For the total Brent the N/G was ca 77 %. The Statfjord Formation was 139 m thick (2613-2752 m) and consisted of alternating sandstones and shales. The N/G was around 63 % with an average porosity of 25 % for the reservoir levels. Some sandy levels had very good petrophysical characteristics (permeabilities above one Darcy). These reservoirs were water bearing. Apart from the two questionable oil shows at the base of the gas zone no oil shows were recorded in the well.
    Two conventional cores were cut. One was cut from 2386 to 2404 m in the Hugin Formation, and the other from 2615 to 2628 m in the Statfjord Formation. No wire line fluid samples were taken.
    The well was permanently abandoned on 26 March 1990 as a gas/condensate discovery.
    Testing
    The top Vestland Group reservoir was perforated and tested in the interval 2386 - 2405 m. Maximum flow was 585 000 m3 of gas with ca 120 Sm3 condensates /day through a 40/64" choke. The GOR was 5100 - 6200 m3/m3 depending on the separator temperature. The condensate density was 0.755 - 0.766 g/cm3 and the gas gravity (air = 1) was 0.678 - 0.692. The temperature at end of build-up was 85 deg C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1040.00
    1900.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2386.0
    2403.8
    [m ]
    2
    2615.0
    2638.4
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    41.2
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 2391-2396m
    Core photo at depth: 2396-2410m
    Core photo at depth: 2401-2403m
    Core photo at depth: 2386-2391m
    Core photo at depth: 2615-2620m
    2391-2396m
    2396-2410m
    2401-2403m
    2386-2391m
    2615-2620m
    Core photo at depth: 2620-2625m
    Core photo at depth: 2625-2628m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    2620-2625m
    2625-2628m

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    DST1
    2386.00
    2405.00
    08.03.1990 - 00:00
    YES

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.07
    pdf
    1.18
    pdf
    1.49

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    PDF
    8.40
    PDF
    105.50
    PDF
    11.36

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    2405
    2336
    11.1
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    15.000
    23.000
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    57
    585000
    0.800
    0.750
    5100

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL VDL GR
    148
    1176
    CST GR
    1812
    2296
    CST GR
    2353
    2858
    DIL DDBHC GR AMS SP
    1154
    2327
    DIL DDBHC GR SP
    2230
    2884
    DIL MSFL GR
    2351
    2481
    FMS GR AMS
    2351
    2790
    LDL CNL NGL AMS
    2351
    2882
    LDL GR AMS
    1154
    2327
    MWD - GR RES DIR
    200
    2900
    RFT GR AMS
    2386
    2638
    SHDT GR AMS
    1170
    2318
    VSP
    1100
    2800

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    138.5
    36
    140.0
    0.00
    LOT
    INTERM.
    13 3/8
    1176.0
    17 1/2
    1180.0
    0.00
    LOT
    INTERM.
    9 5/8
    2350.0
    12 1/4
    2355.0
    0.00
    LOT
    LINER
    7
    2615.0
    8 1/2
    2900.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    255
    1.07
    WATER BASED
    30.01.1990
    369
    1.07
    WATER BASED
    31.01.1990
    825
    1.07
    WATER BASED
    01.02.1990
    1008
    1.07
    WATER BASED
    02.02.1990
    1303
    1.25
    22.0
    10.7
    WATER BASED
    09.02.1990
    2349
    1.30
    27.0
    19.6
    WATER BASED
    12.02.1990
    2615
    1.12
    24.0
    12.2
    WATER BASED
    19.02.1990
    2827
    1.15
    26.0
    11.2
    WATER BASED
    21.02.1990
    2900
    1.15
    27.0
    14.2
    WATER BASED
    23.02.1990

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.22