Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
25.11.2024 - 01:30
Time of last synchronization with Norwegian Offshore Directorate's internal systems

34/10-54 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-54 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-54
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ST09M01.inline 1909 & xline 3163
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1469-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    163
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    02.09.2013
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    11.02.2014
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    11.02.2016
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    11.02.2016
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    BRENT GP
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    MIDDLE JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    COOK FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.5
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    140.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4280.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4249.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    22.5
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    154
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BURTON FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 7' 32.7'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 18' 35.5'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6777151.11
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    462819.52
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7253

  • Wellbore history
    General
    Well 34/10-54 S was drilled to test the Valemon Nord prospect on the Tjalve Terrace in the North Sea. The prospect is situated north of the Valemon Field, between the Gullfaks South, and the Kvitebjørn fields. The primary objective was to prove commercial hydrocarbon volumes in the Middle Jurassic Brent Group.
    Operations and results
    Wildcat well 34/10-54 S was spudded with the semi-submersible installation Transocean Leader on 2 September 2013 and drilled to TD at 4280 m (4249 m TVD) m in the Early Jurassic Burton Formation. Two pilot holes was drilled on location to check for shallow gas. No shallow gas was observed. The well was drilled with a slightly deviated well path below 2700 m with the purpose of hitting the Brent Group optimally. After cutting core no 5 from 4107 - 4128 m, operations were suspended for three weeks for inspection and repairs of fairlead on anchor line #1. The well was drilled with seawater and hi-vis pills down to 1217 m and with oil based XP-07 mud from 1217 m to TD.
    Gas/condensate and oil down to situation was encountered in the Jurassic Brent Group. Gas/condensate was encountered also in the Jurassic Cook Formation. Pressure testing identified several pressure systems. No reliable hydrocarbon gradient could be defined and the hydrocarbon phases are interpreted from sampling. Oil shows were recorded on cores from the reservoir zones; otherwise, no oil shows were recorded in the well.
    Seven cores were cut in the well. Cores 1 to 5 recovered 168.2 m core from the Brent Group the interval 3957 to 4128 m (98.4% recovery). Cores 6 and 7 recovered 19.7 m core from the Cook Formation in the interval 4179 m to 4202 m (85.7% recovery). MDT fluid samples were taken at 3953.01 m (gas condensate), 3987.53 m (gas condensate), 4024 m (oil), 4041.98 m (oil), 4059.01 m (oil), 4068.82 m (water), 4085.52 m (gas condensate), and at 4181.2 m (gas condensate).
    The well was plugged back for side tracking on 11 February 2014. It is classified as an oil and gas discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1800.00
    4280.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3957.0
    3995.0
    [m ]
    2
    3997.0
    4023.7
    [m ]
    3
    4024.0
    4053.3
    [m ]
    4
    4053.3
    4107.0
    [m ]
    5
    4107.0
    4126.6
    [m ]
    6
    4179.0
    4193.6
    [m ]
    7
    4195.0
    4200.2
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    187.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    MDT
    3988.00
    0.00
    CONDENSATE
    27.06.2014 - 00:00
    YES
    MDT
    4024.00
    0.00
    OIL
    27.06.2014 - 00:00
    YES
    MDT
    4041.98
    0.00
    OIL
    01.07.2014 - 00:00
    NO
    MDT
    4059.00
    0.00
    OIL
    01.07.2014 - 00:00
    YES
    MDT
    4085.50
    0.00
    OIL
    17.07.2014 - 00:00
    YES
    MDT
    4181.20
    0.00
    OIL
    18.07.2014 - 00:00
    YES

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    AIT PEX HNGS
    3822
    4280
    AIT PPC BMSIP PPC BPEX
    3012
    3829
    AIT PPCI MSIP PEX
    1037
    2997
    CMR GR
    3930
    4268
    MDT GR
    3953
    4204
    MDT GR
    3953
    4068
    MDT PA MINIDST
    3987
    3987
    MDT PA MINIDST
    3987
    4187
    MWD-ARC6 TELE675
    3958
    4280
    MWD-ARCVRES PP SONI825
    1216
    3012
    MWD-ECO TELE SONI475
    163
    1216
    MWD-PDX5 ARC8 TELE SONI825
    3591
    3829
    MWD-RAB6 ARC TELE
    4128
    4179
    MWD-RAB6 TST6FPWD PDRIVE6 TELE
    3829
    3897
    MWD-RAB6 TST6FPWD PERI115 TELE67
    3897
    3958
    OBMI MSIP GR
    3812
    4283
    VSI4 GR
    2884
    4264
    VSP GR
    163
    2990

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    249.9
    36
    253.0
    0.00
    SURF.COND.
    20
    1209.8
    26
    1207.0
    1.61
    FIT
    INTERM.
    14
    2994.4
    17 1/2
    3012.0
    1.87
    LOT
    INTERM.
    9 7/8
    3820.0
    12 1/4
    3829.0
    2.06
    FIT
    OPEN HOLE
    4280.0
    8 1/2
    4280.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1207
    1.39
    27.0
    OBM-Low ECD
    1217
    1.42
    23.0
    OBM-Low ECD
    1660
    1.39
    33.0
    OBM-Low ECD
    2075
    1.39
    25.0
    OBM-Low ECD
    2245
    1.72
    38.0
    OBM-Low ECD
    2760
    1.39
    24.0
    OBM-Low ECD
    2811
    1.72
    37.0
    OBM-Low ECD
    2813
    1.72
    36.0
    OBM-Low ECD
    3012
    1.60
    23.0
    OBM-Low ECD
    3632
    1.72
    30.0
    OBM-Low ECD
    3645
    1.73
    39.0
    OBM-Low ECD
    3720
    1.72
    35.0
    OBM-Low ECD
    3730
    1.72
    30.0
    OBM-Low ECD
    3829
    1.72
    36.0
    OBM-Low ECD
    3831
    1.73
    39.0
    OBM-Low ECD
    3844
    1.96
    38.0
    OBM-Low ECD-HTHP
    3857
    1.95
    42.0
    OBM-Low ECD-HTHP
    3875
    1.72
    33.0
    OBM-Low ECD
    3875
    1.72
    33.0
    OBM-Low ECD
    3897
    1.96
    38.0
    OBM-Low ECD-HTHP
    3958
    1.91
    31.0
    OBM-Low ECD-HTHP
    4024
    1.91
    30.0
    OBM-Low ECD-HTHP
    4107
    1.91
    34.0
    OBM-Low ECD-HTHP
    4128
    1.91
    41.0
    OBM-Low ECD-HTHP
    4158
    1.91
    42.0
    OBM-Low ECD-HTHP
    4225
    1.91
    44.0
    OBM-Low ECD-HTHP
    4280
    1.91
    44.0
    OBM-Low ECD-HTHP