Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
25.11.2024 - 01:30
Time of last synchronization with Norwegian Offshore Directorate's internal systems

34/10-13

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-13
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-13
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    3D - 185 SP: 385.
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Den norske stats oljeselskap a.s
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    300-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    135
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    24.08.1981
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    05.01.1982
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    05.01.1984
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    02.12.2014
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EARLY JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    STATFJORD GP
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    LATE JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    HEGRE GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    214.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3392.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3391.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3.8
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    108
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    HEGRE GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 12' 1.93'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 18' 3'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6785486.52
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    462422.23
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    431

  • Wellbore history
    General
    Well 34/10-13 was drilled on a horst block in the eastern part of the Gullfaks Fault Block. The primary objective of the well was to test the sandstone of Early Jurassic age (Statfjord formation). The Secondary objective was Carnian sandstone.
    Operations and results
    Appraisal well 34/10-13 was spudded with the semi-submersible installation Deepsea Saga on 24 August 1981 and drilled to TD at 3392 m, 76 m into the Carnian sandstone. At 1725 m, the well started to flow. The influx was circulated out with 1.69 s.g. mud. A total of 21.5 days were lost due to a strike after the drilling of the 6" section had been initiated. The well was drilled with spud mud down to 300 m, with seawater gel from 300 m to 893 m, and with gel/lignosulphonate mud from 893 m to TD. The RFT tool stuck at 2882 m during sampling. The tool was left in the hole and the well was plugged back and tested.
    First oil shows, typically cut and/or fluorescence on claystone and limestone cuttings, was recorded at 1350 m in the Hordaland Group. The shows were described more or less continuous down to top Statfjord reservoir at 1924 m. When drilling mudstones, limestone and marl in the Lista Formation from 1656 to 1701 m there was oil in the mud. Oil was found from top Statfjord Group at 1924 m and down to at least 2114 m in the Hegre Group where oil was tested on DST. No oil/water contact could be established in the Statfjord sandstone and pressure measurements in the Hegre Group were inconclusive. Shows were recorded on sandstones down to 2450 m.  From petrophysical analyses the Statfjord Group had 70 m net pay with 27% average porosity and 24% average water saturation. The Hegre Group reservoir had 16.5 m net pay with average 27.8% porosity and 56% average water saturation. The Carnian sand was encountered at 3316 m. It was waterbearing without shows.
    Sixteen cores were cut in the well. Fifteen cores were cut in succession from 1931 m to 2087 m in the Amundsen Formation and Statfjord Group and recovered a total of 150.8 m core (87% total recovery). The last core was cut from 3373.5 m to 3391.5 m in the Carnian sandstone with 92% recovery. RFT fluid samples were taken at 1936.5 m (oil and gas), 1940 m (oil and gas) and 2111 m (oil and gas).
    The well was permanently abandoned on 5 January 1982 as an oil appraisal well on the Gullfaks Field.
    Testing
    Two drill stem tests were performed.
    DST 1 tested the interval 2107 m to 2114 m in the Hegre Group. The test produced 440 Sm3 oil/day through a 32/64” choke. The GOR was 82.1 Sm3/Sm3 and the oil gravity was 31 °API. The temperature measured at gauge depth was 84 °C.
    DST2 tested the interval 2003 to 2009 m in the Statfjord Group. The test produced 835 Sm3 oil/day through a 32/64” choke. The GOR was 92.5 Sm3/Sm3 and the oil gravity was 40.1 °API. Solution gas had a gravity of 0.82 (air = 1). The temperature measured at gauge depth was 79.8 °C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    NO
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    300.00
    3378.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1931.1
    1931.3
    [m ]
    2
    1931.3
    1941.8
    [m ]
    4
    1944.0
    1959.8
    [m ]
    5
    1961.0
    1961.9
    [m ]
    6
    1963.0
    1973.7
    [m ]
    7
    1974.0
    1987.3
    [m ]
    8
    1988.0
    1997.2
    [m ]
    9
    2003.0
    2011.2
    [m ]
    10
    2011.5
    2017.5
    [m ]
    11
    2018.5
    2034.1
    [m ]
    12
    2035.0
    2044.7
    [m ]
    13
    2047.2
    2062.9
    [m ]
    14
    2065.5
    2075.4
    [m ]
    15
    2077.0
    2085.0
    [m ]
    16
    3373.5
    3390.1
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    150.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 1931-1931m
    Core photo at depth: 1931-1936m
    Core photo at depth: 1936-1941m
    Core photo at depth: 1944-1949m
    Core photo at depth: 1949-1954m
    1931-1931m
    1931-1936m
    1936-1941m
    1944-1949m
    1949-1954m
    Core photo at depth: 1954-1959m
    Core photo at depth: 1961-1962m
    Core photo at depth: 1963-1968m
    Core photo at depth: 1968-1973m
    Core photo at depth: 1974-1978m
    1954-1959m
    1961-1962m
    1963-1968m
    1968-1973m
    1974-1978m
    Core photo at depth: 1979-1984m
    Core photo at depth: 1984-1987m
    Core photo at depth: 1988-1993m
    Core photo at depth: 1993-1997m
    Core photo at depth: 2003-2008m
    1979-1984m
    1984-1987m
    1988-1993m
    1993-1997m
    2003-2008m
    Core photo at depth: 2008-2011m
    Core photo at depth: 2011-2016m
    Core photo at depth: 2016-2017m
    Core photo at depth: 2018-2023m
    Core photo at depth: 2023-2029m
    2008-2011m
    2011-2016m
    2016-2017m
    2018-2023m
    2023-2029m
    Core photo at depth: 2029-2034m
    Core photo at depth: 3379-3385m
    Core photo at depth: 2035-2040m
    Core photo at depth: 3385-3390m
    Core photo at depth: 2040-2044m
    2029-2034m
    3379-3385m
    2035-2040m
    3385-3390m
    2040-2044m
    Core photo at depth: 2047-2052m
    Core photo at depth: 2052-2058m
    Core photo at depth: 2058-2063m
    Core photo at depth: 2065-2070m
    Core photo at depth: 2070-2075m
    2047-2052m
    2052-2058m
    2058-2063m
    2065-2070m
    2070-2075m
    Core photo at depth: 2077-2082m
    Core photo at depth: 2082-2085m
    Core photo at depth: 3378-3374m
    Core photo at depth:  
    Core photo at depth:  
    2077-2082m
    2082-2085m
    3378-3374m

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1110.0
    [m]
    DC
    GEOCH
    1140.0
    [m]
    DC
    GEOCH
    1170.0
    [m]
    DC
    GEOCH
    1200.0
    [m]
    DC
    GEOCH
    1230.0
    [m]
    DC
    GEOCH
    1260.0
    [m]
    DC
    GEOCH
    1290.0
    [m]
    DC
    GEOCH
    1320.0
    [m]
    DC
    GEOCH
    1350.0
    [m]
    DC
    GEOCH
    1380.0
    [m]
    DC
    GEOCH
    1410.0
    [m]
    DC
    GEOCH
    1430.0
    [m]
    DC
    GEOCH
    1460.0
    [m]
    DC
    GEOCH
    1490.0
    [m]
    DC
    GEOCH
    1518.0
    [m]
    DC
    GEOCH
    1545.0
    [m]
    DC
    GEOCH
    1572.0
    [m]
    DC
    GEOCH
    1599.0
    [m]
    DC
    GEOCH
    1626.0
    [m]
    DC
    GEOCH
    1653.0
    [m]
    DC
    GEOCH
    1680.0
    [m]
    DC
    GEOCH
    1707.0
    [m]
    DC
    GEOCH
    1725.0
    [m]
    DC
    GEOCH
    1743.0
    [m]
    DC
    GEOCH

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    TEST2
    2003.00
    2009.00
    23.12.1981 - 21:15
    YES

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    239
    942
    956
    1539
    1539
    1596
    1707
    1905
    1905
    1924
    2052

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.00
    pdf
    0.34

  • Documents – reported by the production licence (period for duty of secrecy expired)

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    2107
    2114
    12.7
    2.0
    2003
    2009
    12.7
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    2.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    467
    38000
    0.876
    0.686
    80
    2.0
    860
    82000
    0.825
    0.645
    95

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL VDL GR
    694
    2682
    CYBERDIP
    1717
    3394
    DIR
    1720
    3394
    DLL MSFL GR
    1717
    2160
    FDC CNL GR CAL
    299
    3394
    GEODIP
    1920
    2055
    HDT
    1717
    2687
    ISF SON GR SP MSFL
    299
    3393
    LSS GR
    1898
    2155
    TDT GR
    1920
    2371
    VDL
    1914
    2100
    WAVEFORM
    1914
    2100

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    299.0
    36
    300.0
    0.00
    LOT
    SURF.COND.
    20
    869.0
    26
    893.0
    1.47
    LOT
    INTERM.
    13 3/8
    1536.0
    17 1/2
    1542.0
    1.80
    LOT
    INTERM.
    9 5/8
    1720.0
    12 1/4
    1725.0
    1.95
    LOT
    LINER
    7
    2680.0
    8 1/2
    2700.0
    1.96
    LOT
    OPEN HOLE
    3391.5
    6
    3392.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    300
    1.06
    70.0
    waterbased
    875
    1.11
    48.0
    waterbased
    1380
    1.25
    49.0
    waterbased
    1630
    1.60
    50.0
    waterbased
    1900
    1.85
    56.0
    waterbased
    2425
    1.86
    53.0
    waterbased
    3392
    1.65
    55.0
    waterbased

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.22