Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
25.11.2024 - 01:30
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/1-21 A

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-21 A
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-21
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    inline2500&crossline2957
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Det norske oljeselskap ASA
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1534-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    49
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    03.03.2015
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    20.04.2015
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    20.04.2017
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    20.04.2017
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE TRIASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    SKAGERRAK FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    MIDDLE JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    SLEIPNER FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    55.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    114.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3313.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2517.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    64.3
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SKAGERRAK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 55' 41.83'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 13' 22.97'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6532476.90
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    455267.90
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7530

  • Wellbore history
    General
    Well 16/1-21 A is a geological sidetrack to well 16/1-21 S. It was drilled to appraise the 16/1-9 Ivar Aasen discovery on the Gungne Terrace in the North Sea. The objective was to obtain key depth and reservoir information for field development in the eastern part of the Ivar Aasen Discovery. The targets were reservoirs in the Hugin/Sleipner and Skagerrak Formations.
    Operations and results
    Wildcat well 16/1-21 A was kicked off on 3 March 2015, from the main well 16/1-21 S with an open hole kick off below the 13 3/8" casing shoe at 1317 m. The well was drilled with the jack-up installation Mærsk Innovator to TD at 3313 m (2517 m TVD) in the Triassic Hegre Group. Due to severe losses when drilling the 12 1/4" section at 2951 m a cement plug was set and the 9 5/8" liner was run with shoe depth at 2796 m. The well was drilled with Versatec oil based mud from kick-off to TD.
    The well penetrated a 6.3 m net sand in the Sleipner Formation above the Skagerrak formation. The reservoir quality in the sand is very good with an average porosity in the net sand of 24 percent. The sand contains gas-condensate and oil. A gas oil contact is interpreted to be at 3192.0 m (2408.0 m TVD).
    The underlying Skagerrak reservoir is oil filled and the net sand interval above the Alluvial Fan is 20.3 meters. The average porosity in the net intervals is 23 percent in Skagerrak 2 and 21 percent in Skagerrak 1. The formation pressures in 16/1-21 A indicated a contact at 3273.9 m (2481.6 m TVD) in Skagerrak Alluvial Fan. However, the pressures in this very calcite cemented part of Skagerrak Formation is about 0.6 bar higher than in the oil-filled Skagerrak above, and the actual contact is not resolved. The deepest oil sample is from 3221.1 m.
    Oil shows were recorded on cores from 3183 m, in the Sleipner Formation. Shows were visible throughout the cored sections with a weakening trend towards the lowermost part of core 3 in the Skagerrak Formation. No shows are described below base of core 3 at 3234 m.
    Three cores were cut from 3174 m in the Heather Formation, through the Sleipner Formation and down to 3235.8 m in the Triassic Skagerrak Formation. The core recovery varied from 92.7% to 99.0 %. The core to log shift is reported to vary between +2.0 m to +3.0 m in different sections of the cores. MDT fluid samples were taken at 3191.03 m (gas-condensate), 3193.44 m (oil), 3195.53 m (oil), 3208.93 m (oil), and 3221.1 m (oil).
    The well was permanently abandoned on 20 April 2015 as a dry well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1300.00
    3312.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3174.0
    3200.8
    [m ]
    2
    3201.0
    3218.6
    [m ]
    3
    3218.8
    3224.6
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    50.1
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    LWD - DI
    168
    373
    LWD - GR RES DEN NEU SON DI PWD
    168
    1304
    LWD - GR RES DI PWD
    1317
    2951
    LWD - GR RES DI PWD NEU DEN
    3133
    3313
    MDT HC
    3024
    3024
    MDT HC
    3119
    3221
    MDT PPC
    2820
    2820
    MRX XPT GR
    3070
    3300
    PPC SS EMM GR UT
    3311
    1656
    PPC SS GR EMM
    1100
    2798
    VSI
    1081
    3154
    ZAIT NMH IS AH NEXT PEX HNGS
    2965
    3302

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    223.1
    36
    223.1
    0.00
    SURF.COND.
    20
    368.0
    26
    373.0
    1.48
    LOT
    PILOT HOLE
    376.0
    9 7/8
    376.0
    0.00
    INTERM.
    13 3/8
    1299.0
    17 1/2
    1304.0
    1.67
    LOT
    LINER
    9 5/8
    2796.0
    12 1/4
    2951.0
    1.60
    FIT
    LINER
    7
    3015.0
    0.0
    0.00
    OPEN HOLE
    3315.0
    8 1/2
    3315.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1440
    1.51
    34.0
    Versatec OBM
    1850
    1.51
    33.0
    Versatec OBM
    2550
    1.51
    33.0
    Versatec OBM
    2950
    1.29
    22.0
    Versatec OBM
    2950
    1.51
    37.0
    Versatec OBM
    3009
    1.29
    23.0
    Versatec OBM
    3219
    1.34
    23.0
    Versatec OBM
    3313
    0.99
    Sea water
    3313
    1.34
    30.0
    Versatec OBM