Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
05.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

30/6-17 A

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/6-17 A
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/6-17
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    NH 82 - 214 cell point 424
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Hydro Produksjon AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    504-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    43
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    04.02.1986
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    18.03.1986
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    18.03.1986
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    18.03.1988
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    01.01.2012
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EARLY JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    COOK FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    110.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2686.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2528.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.8
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    104
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    STATFJORD GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 34' 15.77'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 44' 59.84'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6715194.48
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    486293.49
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    894

  • Wellbore history
    General
    Well 30/6-17 A is a sidetrack to well 30/6-17 R on the western side of the Oseberg Field. Well 30/6-17 R did not penetrate the Statfjord Formation in a high structural position as planned. The sidetrack was drilled to fulfil the objective. Secondary objectives were to appraise the Cook Formation discovery and the gas sands around BCU found in 30/6-17 R. Finally, a minifracture test would be conducted to obtain minimum-horizontal-stress data that could improve drilling efficiency in Eocene clays in the Oseberg area. Prognosed depth of the well was 3532 m (2690 m TVD), 50 m into the Statfjord Formation.
    Operations and results
    Well 30/6-17 was re-entered with the semi-submersible installation Treasure Hunter on 4 February 1986. Sidetrack 30/6-17 A was kicked off due west from below the 13 3/8" casing, with kick off point at 1633 and drilled to TD at 2686 m (2528 m TVD) in the Early Jurassic Statfjord Formation. Drilling proceeded without significant problems. It was drilled with KCl/polymer mud from kick off to 2335 m and with NaCl/polymer mud from 2335 m to TD.
    The well encountered a gas bearing Cook Formation while the Statfjord Formation was found water bearing. Hydrocarbon shows seen in Tertiary and Cretaceous limestones similar to in 30/6-17 R, and also in a ca 5 meter thick sandstone bed associated with the Base Cretaceous Unconformity. The Cook Formation (2460 - 2488 m, 2357.5-2379 m TVD) is developed as an overall coarsening upward sequence. The grain size is fine to medium at the upper part, becoming very fine to fine with increasing silt content downwards. The whole of the Cook Formation was found gas bearing with a net pay of 27.9 m. No oil/gas contact was thus seen. The average porosity is 24.1% and the average water saturation is 28%. Cut off criteria for petrophysical evaluation was: PHI < 12%, Sw > 60%, Vsh >40%. The Statfjord Formation (2632 to TD), 2487-2528 m TVD) was entirely water bearing. The net sand calculated from logs is 22.1 m with an average porosity of 23.8%.
    Seven conventional cores were taken in the well. Core 1 was cut in sandstones and shales at the boundary between the Cretaceous and the Jurassic from 2420 - 2430 m (driller's depth). Cores 2 - 4 were taken in the Cook Formation and the upper part of the Amundsen Formation from 2466 to 2511 m. Cores 5 - 7 were taken in the Statfjord Formation from 2636 m to 2676 m. Due to unfavourable hole conditions no SFT pressure tests or fluid sampling were performed in the well.
    The well was permanently abandoned on 18 March 1986 as a gas well.
    Testing
    No drill stem test was performed. A minifracture test was performed at 1851 - 1852 m in Eocene clays.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1635.00
    2685.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2420.0
    2427.2
    [m ]
    2
    2466.0
    2493.8
    [m ]
    3
    2493.9
    2494.0
    [m ]
    4
    2501.0
    2511.0
    [m ]
    5
    2636.0
    2647.7
    [m ]
    6
    2649.0
    2650.5
    [m ]
    7
    2651.0
    2674.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    81.6
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 2420-2426m
    Core photo at depth: 2426-2427m
    Core photo at depth: 2466-2472m
    Core photo at depth: 2472-2478m
    Core photo at depth: 2478-2484m
    2420-2426m
    2426-2427m
    2466-2472m
    2472-2478m
    2478-2484m
    Core photo at depth: 2484-2490m
    Core photo at depth: 2490-2493m
    Core photo at depth: 2493-2494m
    Core photo at depth: 2501-2507m
    Core photo at depth: 2507-2511m
    2484-2490m
    2490-2493m
    2493-2494m
    2501-2507m
    2507-2511m
    Core photo at depth: 2636-2642m
    Core photo at depth: 2642-2647m
    Core photo at depth: 2649-2650m
    Core photo at depth: 2651-2657m
    Core photo at depth: 2657-2663m
    2636-2642m
    2642-2647m
    2649-2650m
    2651-2657m
    2657-2663m
    Core photo at depth: 2663-2669m
    Core photo at depth: 2669-2674m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    2663-2669m
    2669-2674m

  • Lithostratigraphy

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    1.59
    pdf
    31.76

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL VDL CCL GR
    1500
    2317
    CDL CNL CAL
    1591
    2667
    DIL BHC
    2311
    2675
    DIL LSS GR SP
    1591
    2331
    DLL MSFL
    2318
    2457
    VSP
    1400
    2396

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    INTERM.
    13 3/8
    1593.0
    17 1/2
    2397.0
    0.00
    LOT
    INTERM.
    9 5/8
    2323.0
    12 1/4
    2335.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    185
    1.37
    11.0
    water based
    1540
    1.49
    23.0
    water based
    1835
    1.37
    12.0
    water based
    2180
    1.48
    15.0
    water based
    2250
    1.37
    19.0
    water based
    2335
    1.50
    16.0
    water based
    2399
    1.50
    30.0
    water based
    2501
    1.35
    16.0
    water based
    2686
    1.35
    16.0
    water based