Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
27.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

35/11-9

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    35/11-9
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    35/11-9
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    MN 9201- INLINE 5320 & CROSSLINE 1455
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Hydro Produksjon AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    875-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    61
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    02.03.1997
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    01.05.1997
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    01.05.1999
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    15.06.2005
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    INTRA HEATHER FM SS
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    29.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    357.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2830.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2828.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    6.7
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    95
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIDDLE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    HEATHER FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 3' 54.23'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 30' 6.95'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6770298.99
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    527092.97
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    3009

  • Wellbore history
    General
    Well 35/11-9 is located ca 14 km north of the Troll Field and ca 3.5 km south-east well 35/11-8 S, which discovered oil and gas in a 79 m thick Intra Heather Sandstone unit, termed the "Early Oxfordian Turbidite" sequence. Well 35/11-9 was designed to appraise the oil and gas resources of this discovery. It should delineate the hydrocarbon contacts and test the lateral continuity and cementation of the turbidite sequence. The Sognefjord Formation was seen as secondary objective.
    Operations and results
    Appraisal well 35/11-9 was spudded with the semi-submersible installation West Delta on 2 March 1997 and drilled to TD at 2830 m in the Late Jurassic Heather Formation. The well was drilled with seawater to 1250 m and with ANCO 2000 water based glycol mud from 1250 m to TD.
    The Intra Heather Sandstone unit was encountered at 2653 m. From 2653 m to 2688 m, 30 m net pay oil reservoir showed oil saturation of 76% and the average porosity was calculated to 22.1%. MDT pressure measurements gave an oil-water contact at 2687 m (2658 m TVD MSL), which is 4 m deeper than the oil-water contact in well 35/11-8 S. The top reservoir was, as prognosed, penetrated below the expected gas-oil contact for the structure. However, the main conclusion is that within the range of uncertainties there are pressure communication both in the oil and the gas zones.
    No reservoir sand was encountered in the Sognefjord Formation. No shows were reported above top Jurassic, and all shows apart from those in the Intra Heather Sandstone reservoir, were found associated with in-situ source rock shales . Organic geochemical analyses showed that the oils from 35/11-8 S and 35/11-9 are very similar although a slightly lower maturity was noted for 35/11-8 S. Three conventional cores were cut from 16 m above the Intra Heather Sandstone to 8 m below the Heather Sandstone. MDT fluid samples were taken at 2706 m (water), 2677.4 m (oil), 2679.9 m (oil), and at 2677.5 m (oil).
    The well was permanently abandoned on 1 May 1997 as an oil appraisal well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1360.00
    2827.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2638.0
    2666.0
    [m ]
    2
    2666.0
    2714.2
    [m ]
    3
    2714.2
    2740.5
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    102.5
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 2638-2643m
    Core photo at depth: 2643-2648m
    Core photo at depth: 2648-2653m
    Core photo at depth: 2653-2658m
    Core photo at depth: 2658-2663m
    2638-2643m
    2643-2648m
    2648-2653m
    2653-2658m
    2658-2663m
    Core photo at depth: 2664-2668m
    Core photo at depth: 2666-2671m
    Core photo at depth: 2671-2676m
    Core photo at depth: 2676-2681m
    Core photo at depth: 2681-2686m
    2664-2668m
    2666-2671m
    2671-2676m
    2676-2681m
    2681-2686m
    Core photo at depth: 2686-2691m
    Core photo at depth: 2691-2696m
    Core photo at depth: 2696-2701m
    Core photo at depth: 2701-2706m
    Core photo at depth: 2711-2714m
    2686-2691m
    2691-2696m
    2696-2701m
    2701-2706m
    2711-2714m
    Core photo at depth: 2714-2719m
    Core photo at depth: 2719-2724m
    Core photo at depth: 2724-2729n
    Core photo at depth: 2729-2734m
    Core photo at depth: 2734-2739m
    2714-2719m
    2719-2724m
    2724-2729n
    2729-2734m
    2734-2739m
    Core photo at depth: 2739-2740m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    2739-2740m

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.43

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    3.29

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    1.06
    pdf
    13.81

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    DLL MSFL LDL CNL NGT SP AMS
    1180
    2820
    FMI DSI GR ACTS
    1225
    2795
    MDT GR
    2565
    2731
    MWD - GR RES DIR
    1250
    2830
    VSP GR
    620
    2140
    VSP GR
    1820
    2320
    VSP GR
    2260
    2810

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    447.0
    36
    447.0
    0.00
    LOT
    SURF.COND.
    13 3/8
    1243.0
    17 1/2
    1250.0
    0.00
    LOT
    OPEN HOLE
    2325.0
    12 1/4
    2325.0
    0.00
    LOT
    OPEN HOLE
    2830.0
    8 1/2
    2830.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    420
    1.06
    WATER BASED
    447
    1.06
    WATER BASED
    1250
    1.03
    WATER BASED
    1250
    1.03
    WATER BASED
    1890
    1.25
    21.0
    WATER BASED
    2400
    1.28
    25.0
    WATER BASED
    2830
    1.21
    17.0
    WATER BASED

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.23