Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
27.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

15/12-12

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/12-12
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    RE-CLASS TO DEV
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/12-12
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    SG9809 - 308/NH0073 - 102
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Saga Petroleum ASA
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    938-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    47
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    25.12.2000
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    09.02.2001
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    09.02.2003
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    19.10.2006
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reclassified to wellbore
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    INTRA HEATHER FM SS
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    TRIASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    SKAGERRAK FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    26.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    87.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3085.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3056.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    26
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    126
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SKAGERRAK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 1' 40.68'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    1° 55' 28.34'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6432475.78
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    436478.40
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    3391

  • Wellbore history
    General
    The objective for well 15/12-12 was to test the hydrocarbon potential of the Rev structure in PL 038 approximately 5 km south-east of the Varg Field (Varg A Platform). The target level was Oxfordian Intra Heather Sands of the Viking Group.
    Operations and results
    Well 15/12-12 was spudded with the semi-submersible installation Scarabeo 6 on 25 December 2000 and drilled to TD at 3085 m in the Triassic Skagerrak Formation. At ca 2700 m the well starts to build angle up to a deviation of ca 25 deg at ca 2830 m. This deviation is kept down to TD where it leads to a difference between measured and vertical depth of ca 30 m. The well was drilled with seawater and hi-vis pills through to the base of the 17 1/2" section at 1384 m and with Glydrill KCL Polymer from 1384 m to TD.
    A total of 121 m (2856 - 2977 m) gross Late Jurassic, Intra Heather reservoir sequence was penetrated in well 15/12-12 on the Rev Structure. The reservoir is interpreted as shallow marine sand bodies and is dated Oxfordian of age. On top of the reservoir lie 6 m sand dated Earliest Kimmeridgian of age. This sand was not considered as part of the net reservoir. The massive Intra Heather sands had very good reservoir quality. The cored interval of the reservoir had good hydrocarbon shows. Pressure data showed a clear gas gradient with a distinct GOC at 2954 m (2912 m TVD MSL) and an oil gradient down to base of reservoir (Top Triassic) at 2977 m (2932.5 m TVD MSL). MDT samples of the oil leg indicated an oil-down-to (ODT) situation. The pressure data also showed approximately 40 bars of depletion, caused by the production on the Varg Field (Southern Segment).
    The interval between 2864 - 3000 m was cored in six cores, nearly the complete reservoir section and the upper part of Triassic. MDT fluid samples were taken throughout the reservoir at 2867.5 m, 2895 m, 2961 m, 2964.2 m, and 2972.5 m. Samples from the two deepest levels recovered variable proportions of water and oil, reflecting the lack of a clear oil-water contact (OWC) in the reservoir. This is interpreted as an effect of the pressure depletion due to the production on Varg. Apart from the sampled water, which was heavily mud contaminated, sampled fluids were considered representative for the reservoir.
    The well was permanently abandoned on 9 February 2001 as an oil and gas discovery.
    Testing
    No drill stem test was performed

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1440.00
    3085.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2864.0
    2892.0
    [m ]
    2
    2892.0
    2920.0
    [m ]
    3
    2920.0
    2948.0
    [m ]
    4
    2948.0
    2974.7
    [m ]
    5
    2976.0
    2984.2
    [m ]
    6
    2986.0
    2997.7
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    130.6
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 2864-2869m
    Core photo at depth: 2869-2874m
    Core photo at depth: 2874-2879m
    Core photo at depth: 2879-2884m
    Core photo at depth: 2884-2889m
    2864-2869m
    2869-2874m
    2874-2879m
    2879-2884m
    2884-2889m
    Core photo at depth: 2889-2894m
    Core photo at depth: 2894-2899m
    Core photo at depth: 2899-2904m
    Core photo at depth: 2904-2909m
    Core photo at depth: 2909-2914m
    2889-2894m
    2894-2899m
    2899-2904m
    2904-2909m
    2909-2914m
    Core photo at depth: 2914-2919m
    Core photo at depth: 2919-2924m
    Core photo at depth: 2924-2929m
    Core photo at depth: 2929-2934m
    Core photo at depth: 2934-2939m
    2914-2919m
    2919-2924m
    2924-2929m
    2929-2934m
    2934-2939m
    Core photo at depth: 2939-2944m
    Core photo at depth: 2944-2949m
    Core photo at depth: 2949-2954m
    Core photo at depth: 2954-2959m
    Core photo at depth: 2959-2964m
    2939-2944m
    2944-2949m
    2949-2954m
    2954-2959m
    2959-2964m
    Core photo at depth: 2964-2969m
    Core photo at depth: 2969-2974m
    Core photo at depth: 2974-2980m
    Core photo at depth: 2980-2984m
    Core photo at depth: 2986-2991m
    2964-2969m
    2969-2974m
    2974-2980m
    2980-2984m
    2986-2991m
    Core photo at depth: 2991-2996m
    Core photo at depth: 2996-2998m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    2991-2996m
    2996-2998m

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.42

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    2.20

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    .pdf
    6.86
    .pdf
    3.69

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    APS VSP CCL
    2460
    3040
    CMR ECS
    2820
    2983
    DP MDT
    2964
    2972
    DSI ECS HNGS
    2200
    2829
    FMI DSI CMR200
    2182
    2362
    MDT
    2859
    2937
    MDT
    2895
    3040
    MWD ADN RAB
    2827
    3084
    MWD CDR
    113
    1375
    MWD CDR CDN RAB
    1366
    2823

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    185.0
    36
    185.0
    0.00
    LOT
    SURF.COND.
    20
    599.0
    26
    605.0
    0.00
    LOT
    INTERM.
    13 3/8
    1377.0
    17 1/2
    1384.0
    2.18
    LOT
    INTERM.
    9 5/8
    2829.0
    12 1/4
    2836.0
    0.00
    LOT
    OPEN HOLE
    3085.0
    8 1/2
    3035.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    185
    1.09
    WATER BASED
    456
    1.09
    WATER BASED
    970
    1.05
    WATER BASED
    2110
    1.35
    20.0
    WATER BASED
    2836
    1.39
    25.0
    WATER BASED
    2841
    1.35
    23.0
    WATER BASED
    3085
    1.36
    20.0
    WATER BASED
    3088
    1.36
    19.0
    WATER BASED

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.22