Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/1-28 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-28 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    RE-CLASS TO DEV
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-28
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN12 M02 R16 /inline 3648. xline 3094
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1687-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    134
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    03.04.2018
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    23.08.2018
    Plugged date
    Date when plugging operations was finished, as reported by the operator to the Norwegian Offshore Directorate through DDRS (Daily Drilling Reporting System).
    23.08.2018
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    23.08.2020
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    23.08.2020
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reclassified to wellbore
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    PRE-DEVONIAN
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    BASEMENT
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    108.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4880.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1918.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    91.2
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    80
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PRE-DEVONIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 48' 51.49'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 16' 14.28'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6519754.15
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    457869.23
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8357

  • Wellbore history
    General
    Well 16/1-28 S was drilled to appraise the 16/1-12 Rolvsnes Discovery on the Utsira High in the North Sea. The objective was to verify pressure communication within the reservoir and determine possible depletion resulting from production from the Edvard Grieg Field. Further objectives were to prove the drillability of a 2.5 km long horizontal well within granitic basement, and to perform a production test to better understand the reservoir performance.
    Operations and results
    Appraisal well 16/1-28 S was spudded with the semi-submersible installation COSL Innovator on 3 April and a 36 “x 42” was drilled to 200 m.  A 9 7/8” pilot was drilled from 200  to 780 m due to shallow gas warnings. No shallow gas was observed. Hole instability problems were encountered in the 12 ¼” section, from 1742 to 2186 m, and this section was unintentionally side-tracked at 1978 m while reaming. The side-track, 16/1-28 ST2, was drilled to final TD at 4880 m (1919 m TVD) in granite basement rock. The well was drilled vertical down to 957 m, building angle from there to ca 2410 m, from where the well was drilled horizontally. A union strike delayed the DST operations with approximately 11 days. The well was drilled with seawater and hi-vis pills down to 957  m, with Aquadril mud from 957 m to 1734 m, with Delta TEQ oil-based mud from 1734 m to 2180 m, and with Performadril mud from 2180 m to TD.
    Basement was encountered at 2335.5 m (1908.8 m TVD) and well TD was reached at 4880 m (1919.0 m TVD). A total horizontal section of 2500 m in basement was drilled with an average penetration rate of 9.9 m/h. 65 pressure measurements were attempted, the successful tests showed a depletion of about 10 bars, which can be the result of production from the Edvard Grieg Field. Good oil shows were recorded throughout the fractured granitic reservoir from 2336.5 to 4880 m, otherwise no shows were described in the well.
    Due mainly to wellbore instability issues, no cores or sidewall cores were taken in wellbore 16/1-28 ST2. This restricted the amount of petrographic data acquired to evaluate the degree and type of alteration of the basement rock. Fluid samples were taken during the DST
    The well was permanently abandoned on 23 August 2018 as an oil appraisal.
    Testing
    The well was formation-tested (DST) for ten days. The well was tested from intervals separated by swell packers over the whole reservoir section below 2417 m and production logging was carried out. The maximum production rate was 1100 Sm3 oil per flow day through a 52/64” nozzle opening. The main flow period of 5 days was held with a rate of 650 Sm3 oil per day through a 52/64” nozzle opening. The oil is undersaturated with a gas/oil ratio of 130 Sm3/Sm3. The DST temperature at Gauge depth 1852.4 m TVD was 77.6°C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    970.00
    2186.00

  • Lithostratigraphy

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    0.0
    2093
    0
    20.7
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    0.0
    77
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    0.0
    600
    77000
    130

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MWD LWD - GR PWD RES DIR AC
    176
    1734
    MWD LWD - NBRES NBINC NBGR
    1649
    2186
    MWD LWD - NBRES NBINC NBGR
    1649
    2186
    MWD LWD - PWD RES GR DIR
    131
    957
    MWD LWD - RES PWD GR DIR CAL DEN
    1649
    2186

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    199.3
    36
    200.0
    0.00
    PILOT HOLE
    780.0
    9 7/8
    780.0
    0.00
    SURF.COND.
    20
    957.1
    26
    965.0
    1.56
    FIT
    INTERM.
    13 3/8
    1733.6
    17 1/2
    1742.0
    1.65
    FIT
    LINER
    11 3/4
    1836.0
    0.0
    0.00
    LINER
    9 5/8
    2162.7
    12 1/4
    2180.0
    1.40
    FIT
    OPEN HOLE
    4880.0
    8 1/2
    4880.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    199
    1.39
    23.0
    AQUA-DRILL WBM
    200
    1.03
    Seawater
    200
    1.25
    16.0
    AQUA-DRILL WBM
    200
    1.50
    19.0
    AQUA-DRILL WBM
    469
    1.03
    Seawater
    469
    1.25
    16.0
    AQUA-DRILL WBM
    560
    1.03
    Seawater
    560
    1.50
    16.0
    AQUA-DRILL WBM
    560
    1.25
    16.0
    AQUA-DRILL WBM
    727
    1.03
    Seawater
    727
    1.25
    16.0
    AQUA-DRILL WBM
    965
    1.41
    27.0
    AQUA-DRILL WBM
    965
    1.25
    16.0
    AQUA-DRILL WBM
    965
    1.03
    Seawater
    1107
    1.45
    25.0
    AQUA-DRILL WBM
    1742
    1.03
    24.0
    AQUA-DRILL WBM
    1742
    1.45
    24.0
    CARBO-SEA
    1757
    1.42
    27.0
    CARBO-SEA
    2050
    1.45
    24.0
    CARBO-SEA
    2090
    1.48
    29.0
    DELTA-TEQ
    2100
    1.11
    Other
    2127
    1.50
    32.0
    DELTA-TEQ
    2151
    1.45
    29.0
    CARBO-SEA
    2156
    1.11
    1.0
    PACKER-FLUID
    2156
    1.11
    1.0
    Inhibited Brine
    2180
    1.09
    17.0
    PERFLOW CM
    2180
    1.03
    Seawater
    2180
    1.11
    Inhibited KCL/NaCL
    2180
    1.11
    Other
    2180
    1.50
    31.0
    DELTA-TEQ
    2186
    1.48
    29.0
    DELTA-TEQ
    2186
    1.45
    30.0
    Other
    2186
    1.45
    26.0
    CARBO-SEA
    2195
    1.10
    14.0
    PERFLOW CM
    2493
    1.09
    13.0
    PERFLOW CM
    3002
    1.09
    13.0
    PERFLOW CM
    4072
    1.09
    16.0
    PERFLOW CM
    4471
    1.09
    20.0
    PERFLOW CM
    4880
    1.10
    PACKER-FLUID
    4880
    1.10
    9.0
    SFSCRF
    4880
    1.09
    20.0
    PERFLOW CM