Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.11.2024 - 09:09
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7/12-7

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7/12-7
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7/12-7
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LINJE 201 SP 415
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    BP Norway Limited U.A.
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    583-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    37
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    20.06.1988
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    26.07.1988
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    26.07.1990
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    28.03.2014
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    ULA FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    70.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3855.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3847.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    10.6
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    149
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ULA FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    57° 6' 31.92'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 52' 47.27'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6329652.99
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    492718.91
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    1287

  • Wellbore history
    General
    Well 7/12-7 was drilled on the South East flank of the Ula Field. The objective was to identify an optimal location and depth for a planned water-injection well by appraising the oil/water contact in this area.
    Operations and results
    Appraisal well 7/12-7 was spudded with the semi-submersible installation Vildkat Explorer on 20 June 1989 and drilled to TD at 3855 (3847 m TVD) m in the Late Jurassic Ula Formation. Drilling proceeded without any significant problems. The well was drilled with seawater and bentonite down to 174 m, with seawater/bentonite/spercell/CMC EHV mud from 174 to 1008 m, and with oil based Safemul mud from 1008 m to TD.
    Top reservoir was encountered at 3772 m (3765.5 m TVD) and the reservoir was oil bearing. Cores had oil shows down to the base of the last core at 3842 m. A well defined OWC or free water level was not found, though water saturations were seen to rise to the range 60-90% at ca 3819 m. Core porosity and permeability, RFT tests, and geochemical analysis showed a division between producible and residual oil to at 3815 m. From this it was concluded that that the lower contact for producible oil at the Ula East was ca 290 m deeper than at Ula West. Pressure measurements proved communication with the pressure-depleted parts of the Ula Field.
    Four cores were cut in the well in the Ula Formation in the interval 3800 to 3842.2 m. Core depths are ca 2 m deeper than loggers' depth. Segregated fluid samples were taken at 3797 m, 3834 m and 3842 m. The 2 3/4 gallon chambers from 3834 and 3842 m and the PVT 1 gallon chamber from 3834 m were drained at surface and contained water with indications of oil. On-shore geochemical analysis of the PVT 1 gallon chamber from 3842.2 m showed that it contained 90/10 water/diesel from the drilling mud. The 2 3/4 gallon chamber from 3797 m contained oil from the reservoir.
    The well was suspended on 26 July 1988 as a possible injector. It was classified as an oil appraisal.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    3290.00
    3797.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3800.0
    3801.6
    [m ]
    2
    3801.6
    3810.0
    [m ]
    3
    3810.9
    3829.0
    [m ]
    4
    3829.4
    3842.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    40.7
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 3800-3801m
    Core photo at depth: 3802-3806m
    Core photo at depth: 3806-3810m
    Core photo at depth: 3810-3815m
    Core photo at depth: 3815-3820m
    3800-3801m
    3802-3806m
    3806-3810m
    3810-3815m
    3815-3820m
    Core photo at depth: 3820-3825m
    Core photo at depth: 3825-3829m
    Core photo at depth: 3829-3834m
    Core photo at depth: 3834-3839m
    Core photo at depth: 3839-3842m
    3820-3825m
    3825-3829m
    3829-3834m
    3834-3839m
    3839-3842m

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.38
    pdf
    0.86

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    8.76

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL VDL GR
    900
    3761
    DIL BHC GR
    90
    3844
    DIL GR
    3771
    3853
    LDL CNL GR
    3771
    3854
    MWD
    3305
    3780
    RFT GR
    3797
    3797
    RFT HP GR
    3773
    3834
    RFT HP GR
    3827
    3842
    SAT
    1000
    3760

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    32
    169.0
    670.0
    0.00
    LOT
    INTERM.
    13 3/8
    1003.0
    17 1/2
    1008.0
    1.89
    LOT
    INTERM.
    9 5/8
    2649.0
    12 1/4
    2620.0
    1.98
    LOT
    LINER
    7
    3768.0
    8 1/2
    3800.0
    1.91
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    145
    1.51
    OIL BASED
    27.07.1988
    2996
    1.50
    33.0
    17.0
    WATER BASED
    06.07.1988
    3054
    1.50
    33.6
    20.0
    WATER BASED
    07.07.1988
    3220
    1.50
    32.6
    17.0
    WATER BASED
    08.07.1988
    3483
    0.91
    12.5
    10.0
    OIL BASED
    27.07.1988
    3518
    1.50
    31.6
    17.0
    WATER BASED
    12.07.1988
    3688
    1.51
    60.0
    37.0
    OIL BASED
    27.07.1988
    3784
    1.52
    15.4
    14.0
    WATER BASED
    12.07.1988
    3789
    1.52
    32.6
    16.0
    WATER BASED
    12.07.1988
    3797
    1.52
    34.6
    18.0
    WATER BASED
    14.07.1988
    3797
    1.52
    33.6
    17.0
    WATER BASED
    14.07.1988
    3797
    1.52
    34.6
    18.0
    WATER BASED
    15.07.1988
    3797
    1.56
    30.0
    WATER BASED
    27.07.1988
    3800
    0.90
    10.0
    19.0
    OIL BASED
    27.07.1988
    3801
    0.91
    8.8
    11.0
    OIL BASED
    27.07.1988
    3811
    0.91
    10.4
    9.0
    OIL BASED
    27.07.1988
    3830
    0.91
    OIL BASED
    27.07.1988
    3843
    0.91
    12.5
    10.0
    OIL BASED
    27.07.1988
    3852
    0.91
    13.0
    10.0
    OIL BASED
    27.07.1988
    3852
    0.90
    13.4
    11.0
    OIL BASED
    27.07.1988
    3898
    1.50
    33.6
    17.0
    WATER BASED
    11.07.1988

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.21