Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6707/10-3 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6707/10-3 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6707/10-3
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    inline 1216 PC 1001
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Centrica Resources (Norge) AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1532-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    84
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    07.10.2014
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    29.12.2014
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    29.12.2016
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    29.12.2016
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    KVITNOS FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    36.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    1421.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4789.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4301.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    40.2
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    103
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LANGE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    67° 11' 31.58'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 19' 34.06'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7453962.42
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    427594.90
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7550

  • Wellbore history
    General
    Well 6707/10-3 S was drilled to test the Ivory prospect, approximately 20 km northeast of the Aasta Hansteen Field on the Nyk High in the Norwegian Sea. The primary objectives were to test the Kvitnos Formation (Delfin Member) and the deeper Lysing Formation.
    Operations and results
    Prior to drilling the main bore, a pilot hole 6707/10-U-1 was drilled at a distance of 53.6 m to the SW of the main bore position. The pilot hole was drilled to 2200 m. No shallow gas was observed. Two Ooze layers were penetrated at 1595-1612 m and 1775-1787 m.
    Wildcat well 6707/10-3 S was spudded with the drill ship West Navigator on 7 October 2014 and drilled to TD at 4789 m in the Early Jurassic Lange Formation. Inclination was built from 3.28° at 2224 m to 39.35° 2798 m and held at approximately that angle until final well TD. No significant problem was encountered during drilling to TD, but when during plug and abandon, a sudden deterioration in weather and a rapid change in wind direction caused the drillship to be forced 70 m off location. The automatic emergency disconnect sequence was activated and the shear rams sheared the cement stinger, dropping a total of 2789 m of drill pipe in the well. Ten days WOW followed before weather allowed operations to be resumed. Due to further upcoming weather, it was decided to leave the fish in the hole and commence with plug and abandon. The well was drilled with seawater and hi-vis sweeps down to 2196 m and with Versatec oil based mud from 2196 m to TD.
    Top of the Kvitnos Formation target (Delfin Member) was encountered at 3318 m. Significant dry gas values were recorded in the uppermost 12 m of the Delfin 2 Member and a GWC was identified at 3339 m (3201.6 m TVD). The Lysing Formation was identified at 4321 m, 150 m higher than forecasted. A faint hydrocarbon odour was noted in parts of the cores from the Kvitnos reservoir. No shows were described on the core from the Lysing Formation. Otherwise, there were no shows above the OBM used in the well.
    Three conventional cores were cut over the interval 3332 m to 3463 m in the Kvitnos Formation (Delfin Member) and one 27 m core was cut in the Lysing Formation, over the interval 4333 m to 4360 m. MDT fluid samples were collected at 3323.2 m (gas), 3331.5 m (gas), and 3387 m (water). The water depth at the well location was 1421 m and a seabed temperature of -1°C was measured during operations. This created a significant cooling effect on mud temperatures, as measured by LWD tools.
    The well was permanently abandoned on 29 December 2014 as a gas discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    2200.00
    4789.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3332.0
    3386.1
    [m ]
    2
    3386.0
    3422.0
    [m ]
    3
    3425.5
    3462.7
    [m ]
    4
    4330.0
    4358.5
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    155.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    MDT
    0.00
    0.00
    YES
    MDT
    3331.50
    3323.20
    CONDENSATE
    07.11.2014 - 16:46
    YES
    MDT
    3387.00
    0.00
    WATER
    08.11.2014 - 05:52
    YES

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    1457
    1457
    1774
    1828
    1828
    2288
    3318
    4321
    4321
    4351

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    LWD - GR APWD CAL DEN RES FPT SO
    3225
    4300
    LWD - GR APWD DEN RES POR DI FPT
    4300
    4398
    LWD - GR APWD DEN RES POR SON DI
    4398
    4789
    LWD - GR APWD RES DI
    1503
    2197
    LWD - GR AWPD DEN RES POR DI SON
    2197
    3225
    MDT
    3323
    3550
    MDT
    4322
    4348
    PEX AIT HNGS
    3185
    3605
    PEX AIT HNGS
    3300
    4387
    PPC MSIP
    3185
    3661
    VIVSP
    2113
    4780

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    1503.0
    36
    1503.0
    0.00
    INTERM.
    13 3/8
    2192.0
    17 1/2
    2197.0
    1.36
    LOT
    INTERM.
    10 3/4
    3220.0
    12 1/4
    3225.0
    1.72
    FIT
    LINER
    7 5/8
    4300.0
    9 1/2
    4300.0
    1.65
    FIT
    OPEN HOLE
    4789.0
    6 1/2
    4789.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1625
    1.25
    Seawater
    1900
    1.25
    Seawater
    2232
    1.15
    OBM
    3208
    1.20
    OBM
    3652
    1.24
    OBM
    3910
    1.26
    OBM
    4305
    1.31
    OBM
    4370
    1.35
    OBM
    4400
    1.40
    OBM
    4712
    1.40
    OBM