Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
25.11.2024 - 01:30
Time of last synchronization with Norwegian Offshore Directorate's internal systems

25/5-7

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/5-7
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/5-7
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    inline 1620 & crossline 1835(TO06R06M1)
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Total E&P Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1318-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    60
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    25.08.2010
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    23.10.2010
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    23.10.2012
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    23.10.2012
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS/CONDENSATE
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    BRENT GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    22.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    119.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3045.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3045.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.2
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    110
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    HEGRE GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    59° 39' 43.26'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 34' 15.39'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6614003.76
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    475823.34
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6423

  • Wellbore history
    General
    Well 25/5-7 was drilled on the David prospect on the north-eastern part of the Heimdal Terrace in the North Sea. The primary objective was to investigate the hydrocarbon potential of the Brent and Statfjord reservoirs. Secondary objective was sands in the Tertiary section.
    Operations and results
    Wildcat well 25/5-7 was spudded with the semi-submersible installation Ocean Vanguard on 23 September 2010 and drilled to TD at 3045 m in the Late Triassic Hegre Group. Due to shallow gas low risk, a 9"7/8 pilot hole was drilled first and was opened to 17"1/2. No shallow gas was encountered, but several tight spots were encountered while drilling and opening up this section. At 438 m the rig experienced a power shutdown. The rig was on repair from 31 August 2010 until the 4 September (123.75 hrs NPT). The well was drilled with seawater and hi-vis sweeps down to 1160 m and with oil based mud ("non-aqueous based mud") from 1160 m to TD.
    The well penetrated a massive Ty sand and minor Lista/Heimdal sands, while no Hermod sand was encountered. All potential reservoirs in the Tertiary were found water bearing. The well encountered the Middle Jurassic Brent sandstones at 2684 m, 40 m shallower than prognosed. The thickness of the Brent was 27.5m, 45m less than expected. The Brent reservoir was found gas bearing. The Statfjord was also encountered 40 m shallow to prognosis, but with a thickness of 135m, close to the prognosis. The Statfjord was found water wet. Petrophysical interpretation indicated that the Brent reservoir has a net -to- gross of 93%, an average effective porosity of 17.5% and a water saturation of 12%. The MDT results showed that the mobility in reservoirs are high and that the gas density is 0.26 g/cc. Apart from weak oil shows in the Brent reservoir a weak oil show (very weak light yellow direct and cut fluorescence) was recorded at 1390 m.
    One 54 m core with 100% recovery was cut from 2690 m down to 2744 m covering most of the Brent reservoir sands. MDT gas samples with condensate were taken at 2708 m and at 2689 m.
    Well 25/5 - 7 was plugged back to 2253 m on 24 October 2010. This part of the well bore was permanently abandoned as a gas/condensate discovery. The top hole was designed for re-entry and sidetracking as a producer. The producer 25/5-D-1 H was drilled in 2012.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1170.00
    3045.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2690.0
    2744.2
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    54.2
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    2130.0
    [m]
    DC
    PETROSTR
    2140.0
    [m]
    DC
    PETROS
    2150.0
    [m]
    DC
    PETROS
    2160.0
    [m]
    DC
    PETROS
    2170.0
    [m]
    DC
    PETROS
    2180.0
    [m]
    DC
    PETROS
    2190.0
    [m]
    DC
    PETROS
    2200.0
    [m]
    DC
    PETROS
    2220.0
    [m]
    DC
    PETROS
    2240.0
    [m]
    DC
    PETROS
    2250.0
    [m]
    DC
    PETROS
    2270.0
    [m]
    DC
    PETROS
    2290.0
    [m]
    DC
    PETROS
    2300.0
    [m]
    DC
    PETROS
    2305.0
    [m]
    DC
    PETROS
    2315.0
    [m]
    DC
    PETROS
    2325.0
    [m]
    DC
    PETROS
    2335.0
    [m]
    DC
    PETROS
    2345.0
    [m]
    DC
    PETROS
    2355.0
    [m]
    DC
    PETROS
    2365.0
    [m]
    DC
    PETROS
    2375.0
    [m]
    DC
    PETROS
    2385.0
    [m]
    DC
    PETROS
    2410.0
    [m]
    DC
    PETROS
    2420.0
    [m]
    DC
    PETROS
    2430.0
    [m]
    DC
    PETROS
    2440.0
    [m]
    DC
    PETROS
    2450.0
    [m]
    DC
    PETROS
    2460.0
    [m]
    DC
    PETROS
    2470.0
    [m]
    DC
    PETROS
    2485.0
    [m]
    DC
    PETROS
    2495.0
    [m]
    DC
    PETROS

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    AIT PPC DSI HNGS EDTC
    2561
    3003
    HNGS APS LDS PPC MSIP PPC
    100
    2566
    MDT
    2685
    2880
    MWD LWD - ABG GR RES PWD DI
    1160
    2496
    MWD LWD - DI
    141
    227
    MWD LWD - GR RES PWD DI
    227
    1160
    MWD LWD - GR RES PWD DI
    2496
    2570
    MWD LWD - RES DGR PWD IDS DI
    2684
    3045
    MWD LWD - RES GR PWD
    2570
    2690
    SGT APS LDS CMR
    2610
    2781
    SGT USIT CBL
    0
    0
    UBI OBMI EDTC
    2568
    2781
    VSI GR
    141
    2884

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    220.0
    36
    223.0
    0.00
    LOT
    SURF.COND.
    13 3/8
    1149.0
    17 1/2
    1157.0
    1.50
    LOT
    INTERM.
    9 5/8
    2560.0
    12 1/4
    2570.0
    1.60
    LOT
    OPEN HOLE
    3045.0
    8 1/2
    3045.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    158
    1.04
    16.0
    ManualEntry
    227
    1.03
    15.0
    ManualEntry
    438
    1.20
    20.0
    ManualEntry
    1160
    1.21
    18.0
    ManualEntry
    1165
    1.21
    21.0
    ManualEntry
    2280
    1.21
    21.0
    ManualEntry
    2444
    1.17
    23.0
    ManualEntry
    2496
    1.30
    31.0
    ManualEntry
    2570
    1.30
    28.0
    ManualEntry
    2633
    1.13
    18.0
    KCl mud
    2727
    1.11
    Sodium chloride
    3040
    1.15
    22.0
    ManualEntry
    3045
    1.16
    20.0
    ManualEntry

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.23