Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
25.12.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

34/4-5

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/4-5
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/4-5
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    SG 8320 - 442 SP 188
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Saga Petroleum ASA
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    395-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    146
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    13.11.1983
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    06.04.1984
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    06.04.1986
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    18.05.2004
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EARLY JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    COOK FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    STATFJORD GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    26.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    379.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3917.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3910.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    8.1
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    140
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LUNDE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 41' 9.49'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 17' 52'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6839561.78
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    462840.14
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    37

  • Wellbore history
    General
    Wildcat well 34/4-5 was drilled on the Mort Horst in the Northeastern part of the block. The purpose of the well was to test the Zeta structure for hydrocarbons and to test the stratigraphy below the Base Cretaceous Unconformity. The well encountered hydrocarbons in the Cook Formation and in the Statfjord Formation.
    Operations and results
    The well was spudded with the semi-submersible installation Treasure Saga on November 13 1983 and drilled to TD at 3917 m in Early - Middle Triassic sediments of the Lunde Formation. The well was drilled with seawater and bentonite down to 533 m, with bentonite/gypsum mud from 533 m to 1113 m, with gypsum/polymer mud from 1113 m to 2025 m, with gypsum/lignosulfonate (Unical) mud from 2025 m to 3200 m, and with lignosulfonate from 3200 m to TD.
    Due to severe boulder problems in the 26" hole section, the well had to be re-spudded three times before the 20" casing could be run and cemented. The 20" casing had to be worked and washed down to the planned depth. This action most likely buckled or partly collapsed the 20" casing. It took approximately 5 days to drill/mill out the bottom section of the 20" casing. Circulation was lost at 2026 m when drilling the 17 1/2" hole. Due to the lost circulation, the 13 3/8" casing had to be set at 2011 m. The 12 1/4" section had to be plugged back from 3106 m to 3005 m due to severe hole deviation problems. The maximum hole angle was 8.75°. Re-drilling this hole section and deepening it down to 3200 m the hole angle varied between 3° and 4°. The 9 5/8" casing was set at 3195 m. The 8 1/2" hole section was drilled down to 3424 m, where the first core was cut. The core recovered shale, and it was decided to drill ahead. The hole was drilled down to 3470 m, where a new drill break occurred. While circulating bottoms up for samples a kick was taken. A total of 43 bbls were gained before closing in the well. Six cores were cut down to 3538 m. Analysis of the formation indicated that the potential reservoir section had not been reached. The hole was this time drilled down to 3561 m, where a new drill break occurred. This time 10 cores were cut down to 3648,6 m. A 7" liner was run in the 8 1/2" hole with the liner shoe set at 3757 m.
    The well proved a stratigraphic section ranging in age from possibly Early Triassic to Pleistocene. Minor sand development was penetrated in Miocene and Oligocene. The Cretaceous section was composed of claystones. In the Jurassic two sandstone horizons were encountered, the Cook Formation (3416 m to 3520 m) and the Statfjord Formation (3558.5 m to 3599 m). The Triassic rocks were inter-bedded sandstones, siltstones and claystones. Several unconformities were observed in the well, four in Tertiary, two in Cretaceous, a major unconformity at 3245 m between Callovian and Valanginian, one in Middle Jurassic and a fault cut out in Early Jurassic. Gas peaks up to 7.5 % with shows in limestone stringers were observed in the interval 2137 m to 2600 m in the Late Cretaceous Shetland Group. Weak shows was observed on the core from 3424 m to 3438 m. Good shows with up to 39 % gas was observed in the Cook Formation from 3454 m to 3483 m, from 3483 m shows gradually decreased in intensity. From 3564 good shows appeared in sandstones, and from 3571 m to 3586 m good shows were observed in massive sandstone of the Statfjord Formation. Below 3586 m shows gradually disappeared. No shows were observed below 3603 m.  Testing of the two sandstones proved movable oil present in the Cook Formation and immoveable oil in the Statfjord Formation. Both sandstones were tightly cemented, with poor reservoir qualities. A total of 17 cores were cut as described above. The overall recovery was 95%. Logging operations were hampered by tool sticking, causing considerable discrepancies between drillers and loggers depth. This did not affect the Cook and Statfjord Formation Sands. No fluid samples were taken on wire line. The well was permanently abandoned on 6 April 1983 as a non-commercial oil discovery.
    Testing
    Two drill stem test were carried out, one in the Statfjord sand and one in the Intra Cook sand. The Statfjord drill stem test, 3589.0 m to 3598.5 m produced water with traces of oil. A rate of 27 Sm3 water/day was obtained through an 8/64 inch choke with a wellhead pressure of 2.51 MPa.
    The Cook drill stem test, 3462.7 m to 3480.7 m, produced oil with 19 per cent water. A rate of 48 Sm3 liquid/day was obtained through a 10/64 inch choke and a wellhead pressure of 13.65 MPa. The GOR was measured to 240 Sm3/Sm3 at separator conditions of 1.14 MPa and 40.6 °C. The dead oil density was 0.83 g/cc. At the end of the Cook drill stem test, a hydrate plug was formed in the test string. It was removed by circulating hot mud in the riser and hot tapping of the test string.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    NO
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    510.00
    3868.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3423.0
    3437.7
    [m ]
    2
    3473.0
    3481.4
    [m ]
    3
    3484.0
    3496.2
    [m ]
    4
    3496.0
    3507.6
    [m ]
    5
    3508.0
    3518.0
    [m ]
    6
    3519.0
    3526.7
    [m ]
    7
    3527.0
    3536.7
    [m ]
    8
    3564.0
    3569.5
    [m ]
    9
    3571.0
    3580.0
    [m ]
    10
    3580.0
    3588.5
    [m ]
    11
    3588.0
    3595.0
    [m ]
    12
    3595.0
    3604.2
    [m ]
    13
    3605.0
    3609.0
    [m ]
    14
    3610.0
    3617.0
    [m ]
    15
    3617.0
    3621.2
    [m ]
    16
    3621.0
    3630.2
    [m ]
    17
    3630.0
    3648.8
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    156.7
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 3423-3426m
    Core photo at depth: 3427-3430m
    Core photo at depth: 3431-3434m
    Core photo at depth: 3435-3437m
    Core photo at depth: 3473-3476m
    3423-3426m
    3427-3430m
    3431-3434m
    3435-3437m
    3473-3476m
    Core photo at depth: 3477-3480m
    Core photo at depth: 3481-3482m
    Core photo at depth: 3483-3486m
    Core photo at depth: 3487-3490m
    Core photo at depth: 3491-3494m
    3477-3480m
    3481-3482m
    3483-3486m
    3487-3490m
    3491-3494m
    Core photo at depth: 3495-3496m
    Core photo at depth: 3496-3499m
    Core photo at depth: 3500-3503m
    Core photo at depth: 3504-3507m
    Core photo at depth: 3508-3511m
    3495-3496m
    3496-3499m
    3500-3503m
    3504-3507m
    3508-3511m
    Core photo at depth: 3512-3515m
    Core photo at depth: 3516-3517m
    Core photo at depth: 3518-3521m
    Core photo at depth: 3522-3525m
    Core photo at depth: 3526-3527m
    3512-3515m
    3516-3517m
    3518-3521m
    3522-3525m
    3526-3527m
    Core photo at depth: 3527-3530m
    Core photo at depth: 3531-3534m
    Core photo at depth: 3535-3536m
    Core photo at depth: 3564-3567m
    Core photo at depth: 3568-3569m
    3527-3530m
    3531-3534m
    3535-3536m
    3564-3567m
    3568-3569m
    Core photo at depth: 3571-3574m
    Core photo at depth: 3575-3578m
    Core photo at depth: 3579-3580m
    Core photo at depth: 3580-3583m
    Core photo at depth: 3584-3587m
    3571-3574m
    3575-3578m
    3579-3580m
    3580-3583m
    3584-3587m
    Core photo at depth: 3588-3589m
    Core photo at depth: 3589-3592m
    Core photo at depth: 3593-3594m
    Core photo at depth: 3595-3598m
    Core photo at depth: 3599-3602m
    3588-3589m
    3589-3592m
    3593-3594m
    3595-3598m
    3599-3602m
    Core photo at depth: 3603-3604m
    Core photo at depth: 3605-3608m
    Core photo at depth: 3609-3610m
    Core photo at depth: 3610-3613m
    Core photo at depth: 3614-3616m
    3603-3604m
    3605-3608m
    3609-3610m
    3610-3613m
    3614-3616m
    Core photo at depth: 3617-3620m
    Core photo at depth: 3621-3624m
    Core photo at depth: 3625-3628m
    Core photo at depth: 3629-3630m
    Core photo at depth: 3630-3633m
    3617-3620m
    3621-3624m
    3625-3628m
    3629-3630m
    3630-3633m
    Core photo at depth: 3634-3637m
    Core photo at depth: 3638-3641m
    Core photo at depth: 3642-3645m
    Core photo at depth: 3646-3648m
    Core photo at depth:  
    3634-3637m
    3638-3641m
    3642-3645m
    3646-3648m

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    2059.0
    [m]
    SWC
    RRI
    2090.0
    [m]
    SWC
    RRI
    2166.0
    [m]
    SWC
    RRI
    2198.0
    [m]
    SWC
    RRI
    2240.0
    [m]
    SWC
    RRI
    2282.0
    [m]
    SWC
    RRI
    2292.0
    [m]
    SWC
    RRI
    2343.0
    [m]
    SWC
    RRI
    2374.5
    [m]
    SWC
    RRI
    2415.0
    [m]
    SWC
    RRI
    2468.0
    [m]
    SWC
    RRI
    2510.2
    [m]
    SWC
    RRI
    2574.0
    [m]
    SWC
    RRI
    2771.0
    [m]
    SWC
    RRI
    2895.7
    [m]
    SWC
    RRI
    2944.5
    [m]
    SWC
    RRI
    3000.0
    [m]
    SWC
    RRI
    3015.0
    [m]
    SWC
    RRI
    3024.5
    [m]
    SWC
    RRI
    3031.0
    [m]
    SWC
    RRI
    3085.0
    [m]
    SWC
    RRI
    3098.0
    [m]
    SWC
    RRI
    3104.0
    [m]
    SWC
    RRI
    3115.0
    [m]
    SWC
    RRI
    3233.0
    [m]
    SWC
    RRI
    3280.0
    [m]
    SWC
    RRI
    3300.0
    [m]
    SWC
    RRI
    3320.0
    [m]
    SWC
    RRI
    3345.0
    [m]
    SWC
    RRI
    3370.0
    [m]
    SWC
    RRI
    3414.5
    [m]
    SWC
    RRI
    3420.0
    [m]
    SWC
    RRI

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    DST2
    3462.70
    3480.70
    30.03.1984 - 16:15
    YES

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.70

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    3.31
    pdf
    6.33

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    17.97

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    3599
    3589
    3.2
    2.0
    3481
    3463
    4.0
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    2.060
    132
    2.0
    13.680
    62.550
    128
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    2.0
    48
    11520
    0.834
    0.820
    240

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CDL CNL GR
    3195
    3766
    CDL CNL GR
    3600
    3915
    CDL CNL SP
    0
    0
    CDL GR
    1080
    2022
    CDL GR
    2011
    3197
    COREGUN
    0
    0
    COREGUN
    0
    0
    DIFL BHC GR
    503
    1112
    DIFL BHC GR
    1080
    2022
    DIFL BHC GR
    2011
    3197
    DIFL BHC GR
    3195
    3770
    DIFL BHC GR
    3595
    3916
    DLL MLL GR
    3217
    3769
    FMT
    3239
    3627
    FMT
    3464
    3904
    GR
    405
    1112
    SHDT
    3195
    3766
    SP
    3185
    3530
    VELOCITY
    3195
    3916
    VSP
    510
    3900

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    504.0
    36
    514.0
    0.00
    LOT
    SURF.COND.
    20
    1102.0
    26
    1103.0
    1.55
    LOT
    INTERM.
    13 3/8
    2011.0
    17 1/2
    2020.0
    1.89
    LOT
    INTERM.
    9 5/8
    3187.0
    12 1/4
    3200.0
    2.15
    LOT
    LINER
    7
    3917.0
    8 1/2
    3917.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    525
    1.04
    6.0
    19.0
    WATER BASED
    600
    1.07
    7.0
    19.0
    WATER BASED
    700
    1.08
    10.0
    18.0
    WATER BASED
    900
    1.13
    10.0
    22.0
    WATER BASED
    1355
    1.20
    16.0
    20.0
    WATER BASED
    1610
    1.26
    16.0
    22.0
    WATER BASED
    1830
    1.38
    22.0
    27.0
    WATER BASED
    2030
    1.47
    26.0
    27.0
    WATER BASED
    2190
    1.62
    21.0
    29.0
    WATER BASED
    2350
    1.71
    28.0
    26.0
    WATER BASED
    2985
    1.68
    17.0
    24.0
    WATER BASED
    3260
    1.74
    19.0
    12.0
    WATER BASED
    3650
    1.87
    21.0
    12.0
    WATER BASED

  • Thin sections at the Norwegian Offshore Directorate
    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    3601.25
    [m ]
    3595.75
    [m ]
    3584.50
    [m ]
    3579.00
    [m ]
    3572.75
    [m ]
    3568.00
    [m ]
    3508.95
    [m ]
    3487.60
    [m ]
    3483.38
    [m ]
    3480.75
    [m ]
    3476.50
    [m ]
    3474.20
    [m ]
    3564.25
    [m ]
    3572.50
    [m ]
    3575.50
    [m ]
    3579.25
    [m ]
    3586.00
    [m ]
    3591.00
    [m ]
    3595.25
    [m ]
    3599.25
    [m ]

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.21