Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
29.04.2024 - 01:33
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6407/1-9

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6407/1-9
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6407/1-9
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    inline 3146. xline 3176
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Equinor Energy AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1862-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    35
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    24.09.2021
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    28.10.2021
    Plugged date
    Date when plugging operations was finished, as reported by the operator to the Norwegian Offshore Directorate through DDRS (Daily Drilling Reporting System).
    28.10.2021
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    01.03.2023
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    01.03.2023
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    LANGE FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    31.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    301.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3914.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3914.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    1.3
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    136
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LANGE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    64° 58' 45.35'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 2' 54.31'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7207745.18
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    407905.38
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    9329
  • Wellbore history

    General
    Well 6407/1-9 was drilled to test the Egyptian Vulture prospect in the Grinda Graben in the Norwegian Sea. The primary objective was to confirm hydrocarbons in the Early Turonian Intra Lange Formation sandstones.
    Operations and results
    An 8 1/2 pilot hole NO 6407/1-U-1 was drilled off location to check for shallow gas down to section depth for 26 section. The well was drilled down to 912 m where a flow check confirmed gas bobbles with ROV. The U-1 pilot hole was cemented back, and it was decided to drill another pilot hole.
    The second pilot hole, NO 6407/1-U-2, was drilled to 1445 m, flow checked several intervals and only minor gas bubbles was observed at seabed with ROV. The pilot hole was cemented back, and the planned main well location was moved to second pilot hole location.
    Wildcat well 6407/1-9 was spudded with the semi-submersible installation West Hercules on 24 September 2021 and drilled to TD at 3914 m in the Early Cretaceous Lange Formation. Drilling to TD proceeded without significant problems, but hole stability issues created problems during logging. The well was drilled with seawater and hi-vis pills down to 1445 m, with Versatec oil-based mud from 1445 m to 3095 m, and with Exploradril oil-based mud from 3095 m to TD.
    Numerous Intra-Lange Formation sandstones were penetrated in the interval 3618 m to 3651 m. Light oil was proven in sands in the interval 3715 to 3740 m. Pore pressures between 549 to 549.5 bar was recorded in the upper part of the oil-bearing sands. The only oil shows reported from the well were in these sands.
    One core was cut from 3727 m to 3795 m in the Lange Formation with 94.4% recovery. MDT oil samples were taken at 3718.3 m in the Intra-Lange Formation sandstones. Due to problems with hole stability during wireline logging this was the only sampling station, hence, information about fluid and pressure properties were limited to the uppermost sand unit.
    The well was permanently abandoned on 28 October 2021 as an oil discovery.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1450.00
    3914.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3727.0
    3794.6
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    67.6
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    LWD - APWD RES GR DI
    383
    1445
    LWD - DI
    332
    383
    LWD - DI APWD RES GR DI
    1445
    2345
    LWD - GR DI APWD RES
    3095
    3914
    LWD - GR DI APWD RES GR CAL DEN
    2346
    3095
    MDT CMR
    3150
    3860
    MSIP QGEO
    2283
    3914
    VSI4
    985
    3910
    XLR
    3206
    3728
    ZAIT NEXT XPT PEX HNGS
    3093
    3914
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    36
    381.7
    42
    383.7
    0.00
    INTERM.
    20
    1437.8
    26
    1445.0
    1.72
    FIT
    INTERM.
    13 3/8
    2338.8
    17 1/2
    2346.0
    2.07
    LOT
    LINER
    9 5/8
    3093.8
    12 1/4
    3095.0
    1.92
    FIT
    OPEN HOLE
    3914.0
    8 1/2
    3914.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    339
    1.60
    19.0
    17.0
    Spud Mud
    343
    1.35
    15.0
    14.0
    Spud Mud
    1446
    1.59
    31.0
    21.5
    Glydril Plus
    1582
    1.50
    28.0
    14.5
    Glydril Plus
    1847
    1.59
    32.0
    21.0
    Glydril Plus
    2345
    1.59
    33.0
    20.0
    Glydril Plus
    2510
    1.68
    53.0
    9.5
    Versatec
    2811
    1.71
    53.0
    11.0
    Versatec
    3000
    1.72
    54.0
    10.5
    Versatec
    3148
    1.70
    33.0
    7.5
    Exploradrill
    3619
    1.72
    36.0
    9.0
    Exploradrill
    3914
    1.55
    21.0
    15.0
    Glydril Plus
    3914
    1.72
    38.5
    9.0
    Exploradrill