Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/5-8 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/5-8 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/5-8
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN12M02R16. Inline 2805 Xline 2924
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1755-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    46
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    08.07.2019
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    22.08.2019
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    22.08.2019
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    22.08.2021
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    10.11.2021
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    BASEMENT
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    104.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2468.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2093.0
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 43' 37.32'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 21' 11.7'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6509987.84
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    462547.56
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8704

  • Wellbore history
    General
    Well 16/5-8 S was drilled to test the Goddo prospect on the Utsira High in the North Sea. The primary objective was to prove hydrocarbons in porous/fractured basement below base Cretaceous and to verify pressure communication with the nearby Rolvsnes discovery.
    Operations and results
    Wildcat well 16/5-8 S was spudded with the semi-submersible installation Leiv Eiriksson on 8 July 2019 and drilled to TD at 2468 m (2093 m TVD) 268 m into granitic Basement rock. No shallow gas was identified in the site survey or while drilling the well. Operations proceeded without significant problems. The well was drilled with seawater and hi-vis pills down to 196 m, with KCl/polymer mud from 196 m to 620 m, and with BaraHib ECO water-based mud from 620 m to TD.
    Top Basement was penetrated at 2201.7 m (1889.4 m TVD), underlying Valanginian age Åsgard Fm marls. The basement is porous and fractured with a ca 20-25 m oil column. Pressure data shows that the Goddo discovery is not in pressure communication with the Rolvsnes oil discovery. There were no oil shows outside of the hydrocarbon bearing fractured basement zone in the well.
    Five continuous cores were cut in the interval 2192 to 2229.8 m. Recovery was 99 to 100% for all cores except core no 2 from 2201 to 2206 m, which had a recovery of 79.2%.  The average core to log shift is estimated to +2.03 m with +1.76 m at the BCU /top Basement level in core no 1.  Wire line FTNG fluid samples were taken at 2202.64 m (oil), 2205.38 m (oil), 2205.71 m (oil), 2246.16 m (water), and 2251.46 m (water). PVT analysis of the oil samples gave GOR around 150 Sm3/Sm3 and  an oil density of ca 0.872 g/cm3.
    The well was permanently abandoned on 22 August 2019 as an oil discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    210.00
    2468.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2192.0
    2200.9
    [m ]
    2
    2201.0
    2205.0
    [m ]
    3
    2206.0
    2211.9
    [m ]
    4
    2211.9
    2222.0
    [m ]
    5
    2222.0
    2229.8
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    36.6
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR NEXT XPT GR
    2009
    2468
    FMI MSIP GR
    129
    2468
    FTNG GR
    2201
    2252
    LWD - GR PWD RES DIR
    171
    604
    LWD - GR PWD RES DIR AC
    556
    1411
    LWD - GR RES PWD DIR
    2009
    2192
    LWD - PWD GR DIR
    128
    184
    LWD - RES GR PWD DIR D C N R IMG
    2168
    2468
    LWD - RES GR PWD DIR DEN C NE AC
    1313
    2006
    UBI HRLA PEX HNGS GR
    2009
    2463
    VSI GR
    406
    2464
    XLR GR
    2018
    2446

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    194.0
    42
    194.5
    0.00
    SURF.COND.
    20
    620.0
    26
    620.0
    1.50
    FIT
    INTERM.
    13 3/8
    1422.0
    17 1/2
    1422.0
    1.90
    FIT
    LINER
    9 5/8
    2010.0
    12 1/4
    2010.0
    1.87
    LOT
    OPEN HOLE
    2468.0
    8 1/2
    2468.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1
    1.04
    10.0
    PHB
    1
    1.39
    16.0
    Displacement / Kill mud
    141
    1.04
    10.0
    PHB
    170
    1.39
    16.0
    Displacement / Kill mud
    190
    1.04
    10.0
    PHB
    194
    1.39
    16.0
    Displacement / Kill mud
    197
    1.16
    9.0
    WBM
    255
    1.23
    17.0
    WBM
    460
    1.25
    14.0
    WBM
    513
    1.30
    25.0
    WBM
    620
    1.27
    16.0
    WBM
    620
    1.37
    16.0
    WBM
    704
    1.30
    31.0
    WBM
    1422
    1.48
    32.0
    WBM
    1422
    1.30
    38.0
    WBM
    1427
    1.47
    29.0
    WBM
    1754
    1.31
    31.0
    WBM
    1754
    1.30
    25.0
    WBM
    1780
    1.30
    25.0
    WBM
    1780
    1.14
    18.0
    WBM
    2010
    1.20
    24.0
    WBM
    2010
    1.48
    21.0
    WBM
    2015
    1.21
    24.0
    WBM
    2191
    1.14
    16.0
    WBM
    2191
    1.20
    23.0
    WBM
    2212
    1.14
    16.0
    BaraHib
    2212
    1.14
    18.0
    WBM
    2468
    1.14
    18.0
    WBM