Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6605/8-1

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6605/8-1
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6605/8-1
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    inline NH0202 &4436crossline NH0202-5031
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Hydro Produksjon AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1083-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    131
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    14.06.2005
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    22.10.2005
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    22.10.2007
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    08.11.2007
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    NISE FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    LATE CRETACEOUS
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    LYSING FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.5
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    838.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4513.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4508.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    10.4
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    158
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LANGE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    66° 21' 51.93'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    5° 34' 39.23'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7363094.51
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    615294.53
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    4984

  • Wellbore history
    Well 6605/8-1 is an exploration well on a Late Cretaceous Lysing Prospect situated on the western flank of the Fles North rotated fault block structure in the Vøring Basin outside Mid Norway. The primary objective was to test the presence of movable hydrocarbons in the Lysing prospect. A secondary objective was to investigate the reservoir potential of the Nise Formation
    Operations and results
    Wildcat well 6605/8-1 was spudded in 838 m water depth with the semi-submersible installation Transocean Leader on 14 June 2005 and drilled to TD at 4513 m in Late Turonian sediments of the Lange Formation. Operations went without significant technical problems. No shallow gas or shallow water flow was observed. The well was drilled with spud mud down to 2500 m and with KCl/Polymer/Glydril mud from 2500 m to TD.
    The well penetrated the main target at 4184 m, a 70 m thick Lysing Formation deep-water turbidite sand of Early Coniacian age. Gas was recorded from 4180 m. There were two gas zones separated by a water zone. The upper zone had gas down to a free water level inferred at 4221 m (4193 m TVD MSL). The lower gas zone, at 4253 m, was very thin and was approximately 20 bar overpressured compared to the upper zone. Gas shows were also encountered in Early Campanian Nise siltstone at 3064 m and a deeper Lysing sandstone unit at 4354 m.
    One 9 m long core was taken in the interval 4190-4199 m in the upper Lysing reservoir. It contained sandstones interbedded with thin mudstone layers. MDT fluid samples were taken at 4230.55 m (water), 4231.4 m (water), 4209.4 m (gas), 4211.86m (gas), and at 4253.5 m (gas which gave a dark brown/black liquid when flashed). Temperature at seabed was measured to -1.5 deg C. An MDT run in cased hole after the DST and almost 3 weeks after the last mud circulation gave a maximum temperature of 146 deg C at 4230 m. This was believed to be close to the true formation temperature. From this an average temperature gradient of 4.37 deg C/100 m and a temperature of 158 deg C at total depth was estimated.
    The well was permanently abandoned 22 October 2005 as a gas discovery.
    Testing
    A drill stem test was performed over the interval 4184-4211.5 m in the upper Lysing reservoir with a flow rate of approximately 100 000 Sm3/d on a 1 inch choke. The gas/condensate ratio was 230000 Sm3/Sm3. The gas contained 4 - 5 ppm H2S and 6.5 % CO2. The pressure drawdown in the test was up to 530 bar. This resulted in large gas expansion and subsequent cooling in the well stream. The temperature recording during the test, 116 deg C towards the end of the main flow, was thus considered as not representative for the formation.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    2005.00
    4513.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    4190.0
    4199.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    9.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    4190.1
    [m]
    C
    OD
    4191.0
    [m]
    C
    OD
    4192.3
    [m]
    C
    OD
    4192.9
    [m]
    C
    OD
    4193.7
    [m]
    C
    OD
    4194.4
    [m]
    C
    OD
    4195.4
    [m]
    C
    OD
    4196.2
    [m]
    C
    OD
    4196.3
    [m]
    C
    OD
    4197.1
    [m]
    C
    OD
    4197.8
    [m]
    C
    OD
    4198.6
    [m]
    C
    OD

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    4211.50
    4184.00
    CONDENSATE
    22.09.2005 - 20:00
    YES

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.65

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    txt
    0.00
    txt
    0.03
    xls
    0.07

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    4184
    4211
    25.4
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    2
    100000
    230000

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL
    2825
    4013
    CBL
    4020
    4405
    FMI
    4100
    4514
    HSD
    4230
    4230
    MDT DP PS-1MS-1SC
    4230
    4230
    MDT DP PS-1MS-2SC
    4191
    4211
    MDT DP PS-2MS
    4244
    4428
    MDT PS-PG
    4246
    4252
    MDT PS-PG-2MS-2SC
    4191
    4237
    MDT PS-PG-2MS-2SC
    4238
    4246
    MSCT
    4148
    4438
    MWD LWD - ARC DIR ADN ISONIC
    957
    2000
    MWD LWD - ARC DIR ISONIC
    2900
    4100
    MWD LWD - DIR
    862
    957
    MWD LWD - GVR ARC DIR ISONIC
    4100
    4513
    MWD LWD - RAB ARC DIR ISONIC
    2005
    2900
    PEX HRLA ECS DSI
    1998
    4514
    VSP
    2710
    4510

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    955.0
    36
    957.0
    0.00
    LOT
    SURF.COND.
    20
    1999.0
    26
    2000.0
    1.44
    LOT
    INTERM.
    13 3/8
    2887.0
    17 1/2
    2900.0
    1.62
    LOT
    INTERM.
    9 5/8
    4099.0
    12 1/4
    4100.0
    1.94
    LOT
    OPEN HOLE
    4513.0
    8 1/2
    4513.0
    1.76
    LOT

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    PDF
    0.27