Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7122/7-4 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7122/7-4 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    BARENTS SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7122/7-4
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    NA01M1-R05 3D-INLINE1480 & TRACE 3359
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Eni Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1122-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    66
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    21.09.2006
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    25.11.2006
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    25.11.2008
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    18.12.2008
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE TRIASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    FRUHOLMEN FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    MIDDLE TRIASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    KOBBE FM
    3rd level with HC, age
    Age of lithostratigraphic unit, 3rd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY TRIASSIC
    3rd level with HC, formation
    Name of lithostartigraphic unit, 3rd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    KLAPPMYSS FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    372.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2550.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2389.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    33
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    57
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    HAVERT FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    71° 15' 13.07'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    22° 19' 5.41'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7906413.02
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    547280.98
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    34
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    5406

  • Wellbore history
    Well 7122/7-4 S was drilled 1.8 km northeast of well 7122/7-3 on the Goliat Discovery. The purpose was to prove the OWC and additional oil reserves down dip in the Kap Toscana Group deeper than the ODT in 7122/7-3 and to confirm the up dip oil and gas reserves (GOC) in the Kobbe Formation. The 7122/7-4 S well is the fourth appraisal well on the Goliat discovery.
    Operations and results
    Well 7122/7-4 S was spudded with the semi-submersible installation Polar Pioneer on 21 September 2006 and drilled to TD at 2550 m in the Early Triassic (Griesbachian age) Havert Formation. The well was drilled vertical down through the Kap Toscana Group and then deviated to TD. No significant technical problems were encountered during the operations. The well was drilled with sea water and hi-vis sweeps down to 1050 m. Formate mud previously used for drilling the 7122/7-1, -2 and -3 wells was re-used in this well from 1050 m to TD.
    Top Kap Toscana reservoir was penetrated at 1177 m, 14 m deeper than the prognosis. The reservoir consisted of very fine to fine sandstone and was water-bearing, but shows were recorded on cores from the upper part of the Kap Toskana Group. Top Snadd Formation was penetrated at 1244 m, 26 m deeper than prognosis. The reservoir consisted of sandstone interbedded with siltstone and claystone and was water bearing, but with weak, scattered shows in the interval 1260 to 1370 m. The third reservoir, in the Kobbe Formation, was found at 1793 m (1737 m TVD RKB), 5 m deeper than prognosis. The Kobbe Formation reservoir had a gas cap with the GOC at 1856 m (1790.5 m TVD RKB). The OWC was not clear-cut, but was estimated at 1957 m (1876 m TVD RKB). The upper part of the Kobbe Formation consisted of clean light grey, very fine to coarse Sandstone bodies. The sandstone bodies varied from 1 to 18 m thick with the thickness of the beds decreasing with depth. The Sandstone porosity was between 20 % and 30 % and permeability up to 4000 mD. The sandstones were interbedded with 1 to 10 m thick siltstone beds in the upper section. Below 1950 m the sandstone layers became less and thinner while the siltstone/claystone beds increased in thickness. Below 1990 m the Kobbe Formation consisted almost entirely of marine claystone. A fourth reservoir in the Klappmyss Formation was encountered at 2040.5 m (1947 m TVD RKB), 11 m shallower than prognosis. The reservoir consisted of interbedded sandstones, siltstones and claystones and was oil bearing with an OWC at 2072.5 m (1973 m TVD RKB).
    Six cores were cut. Two were cut from 1182.5 to 1216 m in the Kap Toscana Group, two were cut from 1794 to 1820.64 m in the upper part of the Kobbe Formation, one was cut from 1885 to 1886 m in the oil zone of the Kobbe Formation, and one was cut from 2052 to 2064 m in the Klappmyss Formation. MDT fluid samples were taken at 1177.5 and 1185.6 m in the Kap Toscana Group (water), at 1808.1 m (gas) and 1913 m (oil), and 1989.1 m (water) in the Kobbe Formation and at 2045.1 m (oil) in the Klappmyss Formation.
    The well was permanently abandoned on 25 November 2006 as a Klappmyss Formation oil discovery.
    Testing
    An unconventional well test was performed (Injection test) in order to test the well with the smallest amount of produced hydrocarbons. This technique was successfully full scale tested on Goliath for the first time by ENI. The Kobbe Formation was perforated in the interval 1911-1927 m. Before the injection test, a 5 hours clean-up period was performed in order to recover a significant volume of dead oil for both flow assurance and separator test analysis. This resulted in a total of 30.5 m3 produced oil.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1055.00
    2550.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1182.0
    1197.5
    [m ]
    2
    1198.0
    1214.9
    [m ]
    3
    1794.0
    1818.3
    [m ]
    4
    1820.0
    1820.7
    [m ]
    5
    1885.0
    1886.0
    [m ]
    6
    2052.0
    2063.4
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    69.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1184.5
    [m]
    C
    ICHRON
    1195.9
    [m]
    C
    ICHRON
    1196.9
    [m]
    C
    ICHRON
    1203.6
    [m]
    C
    ICHRON
    1214.0
    [m]
    C
    ICHRON
    1795.3
    [m]
    C
    ICHRON
    1796.9
    [m]
    C
    ICHRON
    1814.9
    [m]
    C
    ICHRON
    1818.3
    [m]
    C
    ICHRON
    1820.5
    [m]
    C
    ICHRON
    1885.9
    [m]
    C
    ICHRON
    2055.8
    [m]
    C
    ICHRON
    2059.7
    [m]
    C
    ICHRON
    2063.5
    [m]
    C
    ICHRON

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    0.00
    0.00
    YES

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.37

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.22
    pdf
    0.72

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR HRLA TLD CNL ECS HNGS ACTS
    1023
    1717
    FMI GR PPC MSIP
    1023
    1717
    FMI-SINIC SCANNER
    1717
    2540
    HRLA PEX ECS CMR GR LEH
    1704
    2436
    MDT GR
    1177
    1315
    MDT GR
    1800
    2473
    MDT GR MULTI SAMPLE
    1808
    1949
    MDT GR MULTI SAMPLE
    1808
    2071
    MSCT GR
    1826
    1896
    MWD - GR RES DIR PRESSURE
    436
    2547
    MWD - GR RES NEU DEN SON DIR PRE
    2344
    2546
    VSP GR
    547
    2540

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    442.0
    36
    444.0
    1.65
    LOT
    SURF.COND.
    13 3/8
    1023.0
    17 1/4
    1024.0
    0.00
    LOT
    INTERM.
    9 5/8
    1704.0
    12 1/4
    1706.0
    1.78
    LOT
    OPEN HOLE
    2550.0
    8 1/2
    2550.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    447
    1.18
    NACL
    449
    1.10
    SPUD MUD
    1050
    1.03
    14.0
    SW/BENTONITE
    1216
    1.31
    12.0
    FORMPRO
    1716
    1.30
    15.0
    FORMPRO
    1795
    1.30
    12.0
    FORMPRO
    2550
    1.25
    12.0
    FORMPRO
    2550
    1.25
    12.0
    FORMPRO

  • Thin sections at the Norwegian Offshore Directorate
    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    1186.80
    [m ]
    1209.52
    [m ]
    1211.00
    [m ]
    1795.05
    [m ]
    1797.95
    [m ]
    1798.40
    [m ]
    1804.50
    [m ]
    1808.25
    [m ]
    1812.80
    [m ]
    1814.05
    [m ]
    1818.05
    [m ]
    1885.09
    [m ]
    2053.10
    [m ]
    2054.25
    [m ]
    2057.80
    [m ]
    2059.05
    [m ]
    2053.85
    [m ]
    2055.05
    [m ]

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.30