Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
11.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

25/11-21 A

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/11-21 A
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    RE-CLASS TO TEST
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/11-21
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    NH 9301-ROW 1405 & COLUMN 1750
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Hydro Produksjon AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    845-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    143
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    12.05.1996
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    01.10.1996
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    01.10.1998
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    29.08.2003
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    PALEOCENE
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    HEIMDAL FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    26.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    129.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3006.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1801.3
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    90.4
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    81
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PALEOCENE
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LISTA FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    59° 9' 43.43'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 27' 53.07'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6558372.45
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    469391.49
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    2812

  • Wellbore history
    General
    Well 25/11-21 S was drilled on the Grane Field. The primary objectives of well 25/11-21 S were to calibrate the depth conversion model with reference to top and base of the Grane reservoir and the oil-water contact, and to investigate horizontal and vertical reservoir barriers and reservoir heterogeneities. The secondary objectives of well 25/11-21 S were to obtain reservoir and fluid data and to investigate uncontaminated initial water saturation values in the oil zone. The well location was selected to allow building up hole angle for later drilling of a horizontal section (25/11-21 A) at the required depth and coordinates and at the same time to provide an accurate seismic tie, i.e. an area with minimal compaction effects and away from faults, in an area where there are indications of a thick sand on the seismic data.
    Sidetrack well 25/11 -21 A was drilled to obtain 600 m to 900 m of horizontal reservoir information. The objectives were to appraise the reservoir in terms of reservoir quality and to confirm the structural top and base reservoir maps; to obtain lateral velocity information for calibration of the depth conversion model; to identify possible reservoir heterogeneities indicated on seismic; and finally to perform an extended test production in the horizontal section of the well.
    Operations and results
    Appraisal well 25/11-21 S was spudded with the semi-submersible installation "Treasure Saga" on 23 October 1995 and drilled to TD at 1957 m (1863.5 m TVD MSL) in Late Cretaceous Hod Formation. The well was drilled with seawater and hi-vis bentonite sweeps down to 1270 m and with KCl / Polymer mud from 1270 m to TD.
    Heimdal Formation sand was penetrated at 1788 m (1711.5 m TVD MSL). A reservoir thickness of 88 m (79.5 m TVD) was defined, giving a net pay of 57.9 m. The pressure data from the Heimdal Formation indicates a 0.4 bar pressure difference to well 25/11-18 T2 and 1.7 bar difference to well 25/11-15 based on HP gauge measurements. The oil-water contact (FWL) in the well was found at 1765 m TVD MSL, i.e. more or less the same as in well 25/11-18-T2 and 2.5 meters deeper than in well 25/11-15. No free gas cap was found.& Both the top and base reservoir seismic reflectors and the depth conversion model were proven to be correct in the area, and the reservoir characteristics as found in wells 25/11-15 and 25/11-18 T2 were confirmed. A walk away VSP and walk away AVO VSP were acquired in well 25/11-21 S yielding good qualify high resolution data. The entire reservoir section was cored from 1778 m to 1880.5 m. The wire line logging programme was followed successfully except for an operational failure of the GHMT-tool. MDT Oil samples were taken at 1790 m (1713.09 m TVD MSL), 1796 m (1718.6 m TVD MSL), 1813 m (1734 m TVD MSL), 1828 m (1747.4 m TVD MSL), 1830 m (1749.4 m TVD MSL), 1837.5 m (1756.2 m TVD MSL), and 1845 m (1763 m TVD MSL). MDT water samples were taken at 1850 m (1767.5 m TVD MSL), 1855 m (1772.1 m TVD MSL), 1861.5 m (1777.9 m TVD MSL), and 1874 m (1789.2 m TVD MSL). Well 25/11-21 S was plugged back to the 13 3/8" casing shoe and suspended as an oil appraisal on 14 November 1995.
    The well was re-entered with the semi-submersible installation "Treasure Saga" on 15 May 1996. Well 25/11-21 A was kicked of at 1262 m and drilled down to 1973 m in the Heimdal Formation. The hole was drilled with a too low angle to reach the 10 3/4" casing point within acceptable tolerances. Thus the hole was plugged back from 1973 m, and a technical sidetrack, 25/11-21 A T2, was drilled from 1783 m, continued inclined to horizontal, and drilled to TD at 3006 m (1801.4 m TVD MSL) in the Late Paleocene Lista Formation. The sidetrack was drilled water based with KCl / Polymer mud from kick off to 2448 m and with CaCO3 / NaCl mud from 2448 m to TD. In well 25/11-21 A T2, the top of the Heimdal Formation sand was penetrated at 1837.5 m (1705.7 m TVD MSL). At a depth of 1749 m TVD MSL a 820 m horizontal section was drilled. Here a 3 m thick calcite cemented layer, corresponding to an intra reservoir reflector, was penetrated at 2514.5 m. A deformed shaly zone, penetrated at 2627.5 - 2652 was probably due to drilling very close to top reservoir in this area. The Base of the Heimdal Formation was reached at 1765.7 m TVD MSL. The reservoir quality of the Heimdal sand is good, showing average porosities of 33%, and a general porosity increase from the SW towards the NE along the well path. The net to gross ratio of the Heimdal Formation is 0.98, due to the penetrated cemented and shaly zones. The oil-water contact (FWL) was found at 1765.6 m TVD MSL, confirming the results from the wells 25/11-21 S and 25/11-18 T2. The average oil saturation within the oil zone is 90%. Only MWD logs were obtained in the sidetrack. No wire line logs were run; consequently no fluid samples were taken on wire line. No conventional or sidewall cores were cut in the sidetrack. After an extended well test well 25/11-21 A was permanently abandoned as an oil appraisal on 1 October 1996
    Testing
    An extended well test (25/11-T-21 A) from the interval 2048 m to 2606 m (1904.2 +/- 0.2 m TVD) in the horizontal section of well 25/11-21 A was carried out during the summer of 1996. The produced oil was stored on the storage tanker "Hellespoint Energy" and the associated gas was flared off from the "Treasure Saga" burner boom. After installation of sand screens and external casing packers, the screen washing and the setting of screen packer were halted for about a month due to a NOPEF strike. During this period the formation around the well bore received approximately 800m3 of drilling mud, kill pills and completion fluids. After the strike the well was put on production. At high production rates (up to 3000 Sm3/day) and especially after the well had started to produce water loss of pressure was observed. The reason for this was probably plugging by particles from the completion fluid. With careful increases in the production rate and with production rates between 800 to 1000 Sm3 the well was flowing with a Productivity Index of approximately 150 Sm3/d/bar at the end of the extended well test period. The static bottom hole pressure was 170 bar and the maximum temperature measured during the test was 81.4 deg C. An extensive fluid sampling programme was carried out. Based on single stage flash analyses of bottom hole samples to 1 atmosphere and 15 deg C the oil density was 0.94 g/cm3, and the corresponding GOR was 14.7 Sm3/Sm3. Gas gravity of separator samples was 0.632 (air = 1).

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1270.00
    3000.00

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1730.0
    [m]
    DC
    RRI
    1735.0
    [m]
    DC
    RRI
    1737.0
    [m]
    DC
    RRI
    1740.0
    [m]
    DC
    RRI
    1742.0
    [m]
    DC
    RRI
    1745.0
    [m]
    DC
    RRI
    1752.0
    [m]
    DC
    RRI
    1760.0
    [m]
    DC
    RRI
    1767.0
    [m]
    DC
    RRI
    1775.0
    [m]
    DC
    RRI
    1782.0
    [m]
    DC
    RRI
    1790.0
    [m]
    DC
    RRI
    1797.0
    [m]
    DC
    RRI
    1805.0
    [m]
    DC
    RRI
    1812.0
    [m]
    DC
    RRI
    1827.0
    [m]
    DC
    RRI
    1832.0
    [m]
    DC
    RRI
    1837.0
    [m]
    DC
    RRI
    2650.0
    [m]
    DC
    RRI
    2652.0
    [m]
    DC
    RRI
    2655.0
    [m]
    DC
    RRI
    2710.0
    [m]
    DC
    RRI
    2715.0
    [m]
    DC
    RRI
    2982.0
    [m]
    DC
    RRI

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    0.00
    0.00
    01.05.1996 - 00:00
    YES

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.42

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    7.32

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    LWD CLLS - SONIC
    2000
    2970
    MWD DPR - GR RES
    1240
    1550
    MWD MDL/MNP - NEU DEN
    2020
    2990
    MWD RNT - NAVIGATOR
    1550
    3000

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    LINER
    10 3/4
    2034.0
    12 1/4
    2034.0
    0.00
    LOT
    OPEN HOLE
    3006.0
    9 1/2
    3006.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1030
    1.30
    WATER BASED
    1262
    1.37
    24.0
    WATER BASED
    1424
    1.37
    21.0
    WATER BASED
    1715
    1.37
    21.0
    WATER BASED
    1841
    1.37
    26.0
    WATER BASED
    1894
    1.37
    22.0
    WATER BASED
    1936
    1.37
    24.0
    WATER BASED
    1973
    1.37
    24.0
    WATER BASED
    2024
    1.37
    26.0
    WATER BASED
    2448
    1.29
    27.0
    WATER BASED
    2760
    1.20
    WATER BASED
    2998
    1.30
    29.0
    WATER BASED
    3006
    1.30
    29.0
    WATER BASED