Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
11.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6706/6-2 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6706/6-2 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6706/6-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    EM00-01WIN17R01 3D: Inline 3645. Xline 7247
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Wintershall Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1730-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    78
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    04.12.2018
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    19.02.2019
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    19.02.2019
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    21.02.2020
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    21.02.2020
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    40.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    1214.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3916.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3807.0
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE CRETACEOUS
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    67° 37' 20.6'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    6° 45' 57.57'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7502669.96
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    405099.99
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8580

  • Wellbore history
    General
    Well 6706/6-2 S was drilled to test the Marisko prospect in the Hel Graben deep waters in the Norwegian Sea. The primary objective was to test the hydrocarbon potential in turbiditic sandstones of the Late Cretaceous Nise Formation
    Operations and results
    A pilot hole 6706/6-U-2 was drilled 30 m away from the main bore location in a 9 7/8" hole to de-risk a shallow anomaly and determine the base of the siliceous Ooze. Afterwards the main bore 6706/6-2 S was initially drilled vertically, with build up to 38 degrees during the 8 1/2'' and 6'' hole sections.
    Wildcat well 6706/6-2 S was spudded with the semi-submersible installation Transocean Spitsbergen on 4 December 2018 and drilled to TD at 3916 m (3767 m TVD) m in Early Paleocene sediments. Operations proceeded without significant problems, but due to bad weather 20% of the rig-time was waiting on weather. The well was drilled with seawater down to 2099 m and with Innovert oil-based mud from 2099 m to TD.
    Two main sandstone units, Sandstone 1 and Sandstone 2, were penetrated but proved to be Paleocene age Intra-Tang sandstones rather than Nise sandstones. Sandstone 1 was dated to the Selandian and Sandstone 2 to the Danian.
    Biostratigraphy in this area is difficult due to the largely resedimented nature of the turbidite sands, showing an overwhelmingly Cretaceous micropaleologic assemblage. However, due to the presence also of Paleocene microfossils in cored samples a Cretaceous age is impossible while a Paleocene age must be correct .
    Sandstone 1 was encountered at 2929.5 m (2924.8 m TVD) and was ca 232 m TVD thick. Sandstone 2 was encountered at 3661.3 m (3598 m TVD) and was ca 182 m TVD thick. Both sandstones were cored. Sandstone 1 had good porosities, but generally moderate to low permeability. Sandstone 2 had moderate porosity but very low permeability. Both sandstones were found to be water wet. Weak shows are described in the cored interval (fluorescence, cut and residual ring) in Sandstone 1, but organic geochemical analyses of core extracts showed invasion of the oil-base on the cores, making the shows inconclusive.
    Four cores were cut. Cores #1 and #2 were cut in succession from 2952.5 to 3061.5 m in Sandstone 1 with 100% recovery. Core #3 was cut from 3678 to 3705 m in Sandstone 2 with 103% recovery, and core #4 was cut from 3745 to 3763.8 m in Sandstone 2 with 90% recovery. The core-log shifts are 0.5 m for Cores #1 and #2, 2.5 m for core #3, and 3.5 m for core #4. MDT fluid samples were taken at 2958.06 m (water), 3735.5 m (water), and 3737.4 m (water)
    The well was permanently abandoned on 19 February 2019 as a dry well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    2110.00
    3916.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2952.7
    3006.6
    [m ]
    2
    3006.6
    3061.5
    [m ]
    3
    3678.0
    3705.8
    [m ]
    4
    3745.0
    3763.8
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    155.4
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    2120.0
    [m]
    DC
    PETROSTR
    2150.0
    [m]
    DC
    PETROS
    2180.0
    [m]
    DC
    PETROS
    2210.0
    [m]
    DC
    PETROS
    2240.0
    [m]
    DC
    PETROS
    2270.0
    [m]
    DC
    PETROS
    2300.0
    [m]
    DC
    PETROS
    2330.0
    [m]
    DC
    PETROS
    2360.0
    [m]
    DC
    PETROS
    2390.0
    [m]
    DC
    PETROS
    2420.0
    [m]
    DC
    PETROS
    2450.0
    [m]
    DC
    PETROS
    2480.0
    [m]
    DC
    PETROS
    2510.0
    [m]
    DC
    PETROS
    2540.0
    [m]
    DC
    PETROS
    2570.0
    [m]
    DC
    PETROS
    2600.0
    [m]
    DC
    PETROS
    2630.0
    [m]
    DC
    PETROS
    2660.0
    [m]
    DC
    PETROS
    2690.0
    [m]
    DC
    PETROS
    2720.0
    [m]
    DC
    PETROS
    2750.0
    [m]
    DC
    PETROS
    2780.0
    [m]
    DC
    PETROS
    2810.0
    [m]
    DC
    PETROS
    2840.0
    [m]
    DC
    PETROS
    2873.0
    [m]
    DC
    PETROS
    2882.0
    [m]
    DC
    PETROS
    2891.0
    [m]
    DC
    PETROS
    2900.0
    [m]
    DC
    PETROS
    2909.0
    [m]
    DC
    PETROS
    2918.0
    [m]
    DC
    PETROS
    2927.0
    [m]
    DC
    PETROS
    2942.0
    [m]
    DC
    PETROS
    2948.0
    [m]
    DC
    PETROS
    2956.5
    [m]
    C
    PETROS
    2960.9
    [m]
    C
    PETROS
    2966.3
    [m]
    C
    PETROS
    2978.6
    [m]
    C
    PETROS
    2980.2
    [m]
    C
    PETROS
    2983.3
    [m]
    C
    PETROS
    2989.1
    [m]
    C
    PETROS
    3005.8
    [m]
    C
    PETROS
    3020.6
    [m]
    C
    PETROS
    3029.1
    [m]
    C
    PETROS
    3039.7
    [m]
    C
    PETROS
    3052.1
    [m]
    C
    PETROS
    3080.0
    [m]
    DC
    PETROS
    3086.0
    [m]
    DC
    PETROS
    3113.0
    [m]
    DC
    PETROS
    3131.0
    [m]
    DC
    PETROS
    3143.0
    [m]
    DC
    PETROS
    3170.0
    [m]
    DC
    PETROS
    3179.0
    [m]
    DC
    PETROS
    3191.0
    [m]
    DC
    PETROS
    3203.0
    [m]
    DC
    PETROS
    3212.0
    [m]
    DC
    PETROS
    3221.0
    [m]
    DC
    PETROS
    3230.0
    [m]
    DC
    PETROS
    3239.0
    [m]
    DC
    PETROS
    3251.0
    [m]
    DC
    PETROS
    3263.0
    [m]
    DC
    PETROS
    3275.0
    [m]
    DC
    PETROS
    3287.0
    [m]
    DC
    PETROS
    3299.0
    [m]
    DC
    PETROS
    3311.0
    [m]
    DC
    PETROS
    3323.0
    [m]
    DC
    PETROS
    3335.0
    [m]
    DC
    PETROS
    3347.0
    [m]
    DC
    PETROS
    3356.0
    [m]
    DC
    PETROS
    3377.0
    [m]
    DC
    PETROS
    3392.0
    [m]
    DC
    PETROS
    3404.0
    [m]
    DC
    PETROS
    3416.0
    [m]
    DC
    PETROS
    3431.0
    [m]
    DC
    PETROS
    3443.0
    [m]
    DC
    PETROS
    3455.0
    [m]
    DC
    PETROS
    3467.0
    [m]
    DC
    PETROS
    3479.0
    [m]
    DC
    PETROS
    3491.0
    [m]
    DC
    PETROS
    3503.0
    [m]
    DC
    PETROS
    3515.0
    [m]
    DC
    PETROS
    3527.0
    [m]
    DC
    PETROS
    3539.0
    [m]
    DC
    PETROS
    3551.0
    [m]
    DC
    PETROS
    3563.0
    [m]
    DC
    PETROS
    3575.0
    [m]
    DC
    PETROS
    3587.0
    [m]
    DC
    PETROS
    3599.0
    [m]
    DC
    PETROS
    3611.0
    [m]
    DC
    PETROS
    3623.0
    [m]
    DC
    PETROS
    3635.0
    [m]
    DC
    PETROS
    3647.0
    [m]
    DC
    PETROS
    3655.0
    [m]
    SWC
    PETROS
    3656.0
    [m]
    DC
    PETROS
    3665.0
    [m]
    DC
    PETROS
    3674.0
    [m]
    C
    PETROS
    3677.0
    [m]
    DC
    PETROS
    3681.7
    [m]
    C
    PETROS
    3684.5
    [m]
    C
    PETROS
    3694.6
    [m]
    C
    PETROS
    3713.0
    [m]
    C
    PETROS
    3716.0
    [m]
    DC
    PETROS
    3722.0
    [m]
    C
    PETROS
    3731.0
    [m]
    DC
    PETROS
    3746.4
    [m]
    C
    PETROS
    3756.1
    [m]
    C
    PETROS
    3785.0
    [m]
    DC
    PETROS
    3812.0
    [m]
    C
    PETROS
    3815.0
    [m]
    DC
    PETROS
    3824.0
    [m]
    DC
    PETROS
    3830.0
    [m]
    C
    PETROS
    3842.0
    [m]
    DC
    PETROS
    3860.0
    [m]
    DC
    PETROS
    3860.0
    [m]
    C
    PETROS
    3869.0
    [m]
    C
    PETROS
    3878.0
    [m]
    DC
    PETROS
    3887.0
    [m]
    DC
    PETROS
    3896.0
    [m]
    DC
    PETROS
    3908.0
    [m]
    DC
    PETROS
    3914.0
    [m]
    DC
    PETROS
    3916.0
    [m]
    DC
    PETROS

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    1254
    1254
    1324
    1507
    1507
    2110
    2110

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    ASLT USIT
    0
    0
    ASLT USIT
    3536
    2862
    CMR HNGS ADT NEXT APS
    3536
    3916
    LWD - CORE
    2952
    3006
    LWD - CORE
    3006
    3061
    LWD - CORE
    3678
    3705
    LWD - CORE
    3745
    3766
    LWD - DIR
    1254
    1346
    LWD - DIR GR RES ABG DEN NEU PWD
    3061
    3537
    LWD - DIR GR RES ABG PWD
    2869
    2952
    LWD - DIR GR RES DEN NEU PWD
    3766
    3916
    LWD - DIR GR RES DEN NEU PWD GEO
    3537
    3678
    LWD - DIR GR RES DEN NEU PWD GEO
    3705
    3745
    LWD - DIR GR RES SON DEN NEU ABG
    2103
    2869
    LWD DIR GR RES
    1346
    2103
    MDT SAT
    2933
    3224
    PQ-XLD PO-ST PQ-QS HY PO-HP IFA
    3663
    3870
    PQ-XLD PO-ST SAT PQ-QS HY PO IFA
    3663
    3737
    SS QGEO ZAIT
    3536
    3916
    VSI-4 ZO
    0
    0
    ZAIT HNGS ADT GPIT PPC MAST GR
    1254
    3537

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    1344.5
    36
    1346.0
    0.00
    SURF.COND.
    20
    2099.2
    26
    2103.0
    1.24
    LOT
    INTERM.
    9 5/8
    2862.0
    12 1/4
    2869.0
    1.38
    LOT
    LINER
    7
    3536.0
    8 1/2
    3537.0
    1.52
    LOT
    OPEN HOLE
    3916.0
    6
    3916.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1346
    1.30
    Water
    1451
    1.30
    Water
    2045
    1.14
    Oil
    2078
    1.30
    Water
    2103
    1.12
    Oil
    2103
    1.03
    Water
    2106
    1.12
    Oil
    2434
    1.14
    Oil
    2869
    1.25
    Oil
    2869
    1.14
    Oil
    3061
    1.25
    Oil
    3405
    1.34
    Oil
    3497
    1.25
    Oil
    3547
    1.35
    Oil
    3550
    1.37
    Oil
    3678
    1.34
    Oil
    3678
    1.37
    Oil
    3704
    1.34
    Oil
    3916
    1.34
    Oil