Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
11.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

30/6-17 R

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/6-17 R
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/6-17
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    NH 82 - 214 cell point 424
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Hydro Produksjon AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    478-L2
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    83
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    14.11.1985
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    04.02.1986
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    04.02.1988
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    01.01.2012
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    YES
    Reentry activity
    Reason for reentry of the wellbore. Only relevant for exploration wellbores. Example of legal values: DRILLING, DRILLING/PLUGGING, LOGGING, PLUGGING, TESTING, TESTING/PLUGGING.
    DRILLING
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EARLY JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    COOK FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    110.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2650.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2650.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.75
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    104
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    STATFJORD GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 34' 15.77'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 44' 59.84'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6715194.48
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    486293.49
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    849

  • Wellbore history
    General
    Well 30/6-17 was drilled on the Alpha structure on the western side of the Oseberg Field in the northern North Sea. The structure is a tilted and rotated fault block with a Jurassic sequence dipping towards the east. The main objective was to prove hydrocarbons in the Statfjord Formation. Prognosed depth was 200 m into the Statfjord Formation with TD at ca 2682 m. Well 30/6-17 was drilled by Vildkat Explorer to a depth of 615 m where it was temporary abandoned due to technical problems. The re-entry 30/6-17 R was made to fulfil the original objectives.
    Operations and results
    Wildcat well 30/6-17 was re-entered with the semi-submersible installation Treasure Hunter on 14 August 1985 and drilled to TD at 2650 m in the Early Jurassic Statfjord Formation. The well was drilled without significant technical problems, but about one third of the time was counted as downtime. The main contribution to the excessive downtime was waiting on weather. The well was drilled with KCl/polymer mud from 615 m to 2409 m and with NaCl/polymer mud from 2409 m to TD.
    Oil shows were recorded on limestone and dolomite stringers in the Tertiary and Late Cretaceous, beginning at 1650 m and all the way down to near BCU at 2290 m. These oil shows were most frequent, and strongest, in the interval 1750 to 1810 m in the lower part of the Tertiary Hordaland Group. Two gas bearing sandstones units, possibly reworked Brent Group, were found at the BCU (2296 - 2300 m and 2303 - 2308 m).
    The prognosed target for the 30/6-17 well was the Statfjord Formation. The well was, however, drilled ca 600 m east of the proposed location at a structurally down flank position. At this position also the Cook Formation was penetrated.
    The Cook Formation (2401.5 - 2441 m) consists of medium to fine grained sand sandstones in the upper part, becoming fine to very fine with depth. The sandstones were found oil bearing down to 2419.5 m (free water level from RFT). No gas/oil contact was seen in the well, but the presence of a gas cap was indicated in the DST. The net pay is calculated from logs to 15.9 m, with an average porosity of 26.4% and average water saturation of 40.1%. Cut off criteria were: PHI < 12%, Vsh > 40%, Sw > 60%. The Statfjord Formation (2563 m - TD) was encountered water bearing. Of a gross thickness of 73 m (log) penetrated by the well, 57.6 m was net sand with an average porosity of 24.3%. The RFT results indicate no pressure communication between the Statfjord and the Cook Formations.
    A total of six cores were cut. Core 1 at 2324 - 2342.15 m was an attempt to cut a core from the gas bearing sands at BCU, but did not really capture the sands. Cores 2 - 4 were cut in the Cook Formation, while cores 5 and 6 were cut in the Statfjord Formation. There is a discrepancy between loggers and drillers depth of 2 m for cores no 1 - 4, and 4 m for cores no 5 and 6, the logger's depth being the shallower. SFT/RFT pressure tests and sampling were performed in the Cretaceous and Jurassic. In the Cretaceous interval sixteen SFT good pressure tests were taken. A segregated SFT fluid sample was unsuccessfully attempted taken at 2297.9 m in one of the gas sands. RFT was used for pressure recordings and sampling in the Cook and Statfjord Formations. Twenty one pressure measurements were recorded, and one segregated sample was taken in the Cook Formation at 2408.5 m (5.82 litre oil with some gas and water/filtrate in 1st. chamber).
    4 February the well bore was plugged back to the 13 3/8" casing shoe for an up-dip sidetrack to the original target Statfjord Formation. The well is classified as an oil and gas discovery.
    Testing
    One DST was performed in the Cook Formation at 2401.7 - 2414.7 m. Seven flow periods with different chokes and rates were tested. In the second flow period the well produced oil at a rate of 701.1 Sm3/d and gas at a rate of 110 000 Sm3/d Through a 14.29 mm choke. The gas/oil ratio was 156.9 Sm3/Sm3. The oil gravity was measured to 0.824 g/cc (40.1 API) and gas gravity was 0.662 (air = 1). The GOR varied from 130 to 274 Sm3/Sm3. When the well was produced at higher rates the GOR increased substantially. This indicated the presence of a gas cap, and that the well penetrated the reservoir just below the gas/oil contact. In the three final flows the measured bottom hole temperature stabilised at 97.8 deg C, independent of very variable flow rate and GOR.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    240.00
    2650.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2324.0
    2342.2
    [m ]
    2
    2411.0
    2417.0
    [m ]
    3
    2423.0
    2443.9
    [m ]
    4
    2444.0
    2445.4
    [m ]
    5
    2570.0
    2588.3
    [m ]
    6
    2588.3
    2612.6
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    88.9
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 2324-2329m
    Core photo at depth: 2329-2334m
    Core photo at depth: 2334-2339m
    Core photo at depth: 2339-2342m
    Core photo at depth: 2411-2417m
    2324-2329m
    2329-2334m
    2334-2339m
    2339-2342m
    2411-2417m
    Core photo at depth: 2417-2423m
    Core photo at depth: 2423-2429m
    Core photo at depth: 2429-2435m
    Core photo at depth: 2435-2441m
    Core photo at depth: 2441-2443m
    2417-2423m
    2423-2429m
    2429-2435m
    2435-2441m
    2441-2443m
    Core photo at depth: 2444-2445m
    Core photo at depth: 2570-2576m
    Core photo at depth: 2576-2582m
    Core photo at depth: 2582-2588m
    Core photo at depth: 2588-2588m
    2444-2445m
    2570-2576m
    2576-2582m
    2582-2588m
    2588-2588m
    Core photo at depth: 2488-2594m
    Core photo at depth: 2594-2600m
    Core photo at depth: 2600-2606m
    Core photo at depth: 2606-2612m
    Core photo at depth: 2612-2613m
    2488-2594m
    2594-2600m
    2600-2606m
    2606-2612m
    2612-2613m

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    DST1
    2401.00
    2414.00
    28.10.1986 - 00:00
    YES

  • Lithostratigraphy

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    3.65
    pdf
    18.67

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    2401
    2415
    14.3
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    701
    110000
    0.820
    0.660
    157

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL VDL
    492
    2544
    CDL CNL CAL GR
    601
    2643
    DIL LSS GR SP
    560
    2643
    DLL MSFL
    2147
    2642
    FED
    1899
    2638
    GR
    2084
    2405
    ISF LSS GR
    221
    609
    RFT
    2405
    2628
    SFT
    2172
    2307
    SGR
    2378
    2644
    X-Y CAL
    601
    2638

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    SURF.COND.
    20
    601.0
    26
    615.0
    0.00
    LOT
    INTERM.
    13 3/8
    1593.0
    17 1/2
    1621.0
    1.74
    LOT
    INTERM.
    9 5/8
    2386.0
    12 1/4
    2406.0
    0.00
    LOT
    LINER
    7
    2638.0
    8 1/2
    2650.0
    1.70
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    2397
    1.50
    33.0
    water based
    2399
    1.50
    30.0
    water based
    2421
    1.32
    18.0
    water based
    2554
    1.32
    water based
    2554
    1.32
    15.0
    water based
    2613
    1.32
    17.0
    water based
    2650
    1.32
    17.0
    water based

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    PDF
    0.21