2/7-6
Export:
PDF
![PDF icon](https://factpages.sodir.no/Images/file-pdf.png)
-
General information
-
Wellbore history
GeneralWell 2/7-6, was drilled on the northern part of the Eldfisk structure in the North Sea. The primary objective was to test the Danian Limestone, and secondarily to test for possible further hydrocarbons in the Late Cretaceous of the Eldfisk structure.Operations and resultsWildcat well 2/7-6 was spudded with the semi-submersible installation Ocean Viking on 31 March 1973 and drilled to TD at 3381 m in the Early Cretaceous Cromer Knoll Group. The well was drilled with seawater and hi-vis sweeps down to 488 m and with gypsum-lignosulphonate mud from 488 m to TD. Diesel was added to the mud below 488 m.The Danian Ekofisk Formation and the underlying Tor Formation were found oil bearing and tested to yield commercial quantities of oil from top at 2911 m to 3078 m.No cores were cut and no fluid samples were taken on wire line.The well was permanently abandoned on 8 June 1973 as an oil appraisal well.TestingFour drill stem tests were performed, two in the Ekofisk Formation and two in the Tor Formation.DST1 tested the interval 2973 to 2987 m and produced after acidization 46 Sm3 oil and 12400 Sm3 gas /day through a 96/64" choke. The GOR was 274 Sm3/Sm3, the gas gravity was 0.699 (air = 1), and the oil gravity was 36.6°API.DST2 tested the interval 3069 to 3078 m and produced after acidization 158 Sm3 oil and 56900 Sm3 gas /day through a 96/64" choke. The GOR was 359 Sm3/Sm3 and the oil gravity was 32.4°API.DST3 tested the interval 2993 to 3054 m. The formation was not acidized. It produced 719 Sm3 oil and 184100 Sm3 gas /day. The GOR was 256 Sm3/Sm3, the gas gravity was 0.694 (air = 1), and the oil gravity was 35.9°API.DST4 tested the interval 2914 to 2957 m and produced after acidization 691 Sm3 oil and 290700 Sm3 gas /day through a 48/64" choke. The GOR was 420 Sm3/Sm3, the gas gravity was 0.704 (air = 1), and the oil gravity was 36.2°API. -
Cuttings at the Norwegian Offshore Directorate
Cuttings at the Norwegian Offshore Directorate Cuttings available for sampling?YESCuttings at the Norwegian Offshore Directorate Cutting sample, top depth [m]Cutting samples, bottom depth [m]502.923377.18 -
Lithostratigraphy
Lithostratigraphy Top depth [mMD RKB]Lithostrat. unit972795279528072850288129103350 -
Geochemical information
-
Documents – reported by the production licence (period for duty of secrecy expired)
Documents – reported by the production licence (period for duty of secrecy expired) Document nameDocument formatDocument size [MB]pdf1.14pdf33.41 -
Documents – Norwegian Offshore Directorate papers
Documents – Norwegian Offshore Directorate papers Document nameDocument formatDocument size [MB]pdf72.88pdf0.82 -
Drill stem tests (DST)
Drill stem tests (DST) Test numberFrom depth MD
[m]To depth MD
[m]Choke size
[mm]1.0297329870.02.0306930780.03.0299330540.04.0291429570.0Drill stem tests (DST) Test numberFinal shut-in pressure
[MPa]Final flow pressure
[MPa]Bottom hole pressure
[MPa]Downhole temperature
[°C]1.02.03.04.0Drill stem tests (DST) Test numberOil
[Sm3/day]Gas
[Sm3/day]Oil density
[g/cm3]Gas grav. rel.airGOR
[m3/m3]1.044133930.8572.0167572000.8633.07381891560.8554.08052746730.843 -
Logs
Logs Log typeLog top depth [m]Log bottom depth [m]BHC4863377CBL27433331CDM25913338CNL CCL27433337DL27433377FDC27433338GR105486IES4863380ML MLL27433338SNP24263338VELOCITY4863377 -
Casing and leak–off tests
Casing and leak–off tests Casing typeCasing diam.
[inch]Casing depth
[m]Hole diam.
[inch]Hole depth
[m]LOT/FIT mud eqv.
[g/cm3]Formation test typeCONDUCTOR30134.036134.00.00LOTSURF.COND.20484.026497.00.00LOTINTERM.13 3/81211.017 1/21224.00.00LOTINTERM.9 5/82426.012 1/42438.00.00LOTLINER73356.08 1/23381.00.00LOT -
Drilling mud
Drilling mud Depth MD [m]Mud weight [g/cm3]Visc. [mPa.s]Yield point [Pa]Mud typeDate measured1301.07waterbased4871.31waterbased12191.37waterbased24381.37waterbased