Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

31/2-17 B

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    31/2-17 B
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    SUSPENDED
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    31/2-17
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    NH-8901- LINJE 794 & SP. 1404
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Hydro Produksjon AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    719-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    14
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    01.02.1992
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    14.02.1992
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    14.02.1994
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    06.06.2006
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    SOGNEFJORD FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    24.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    341.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    1838.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1575.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    88.8
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    80
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SOGNEFJORD FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 52' 57.08'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 27' 5.79'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6749946.42
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    524516.87
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    1899

  • Wellbore history
    General
    Well bores 31/2-17 S, -A, and -B were drilled on the north-western periphery of the Troll West gas and oil discovery. The objective was to obtain the thickness of the oil zone and reservoir properties in the "Intermediate Area". Well bores 31/2-17 S and 31/2-17 A are located on each side of a fault subdividing the Intermediate Area into two main compartments. Well 31/2-17 S is located on the eastern side of the fault. The side track 31/2-17 A was turned 180 degrees and landed on the western side of the fault. Well 31/2-17 B was side-tracked from well 31/2-17 A and drilled horizontally to a position about 5 m above the oil water contact.
    Operations and results
    All three well bores were drilled with the semi-submersible installation Transocean 8 from the same wellhead location. Operations commenced with spud of 31/2-17 S on 28 December 1991 and ended with temporary abandonment of 31/2-17 B on 14 February 1992.
    Well 31/2-17 S was drilled to TD at 2220 m in the Middle Jurassic Fensfjord Formation. No significant technical problem occurred in the well bore. The well bore was drilled with sea water and hi-vis pills down to 921 m and with KCl/brine/PHPA mud from 921 m to TD. One and a half m of Draupne Formation was penetrated at 1870 m. The Sognefjord Formation reservoir was encountered with gas at 1871.5 m. The Gas-Oil-Contact was penetrated at 1972 m (1544.2 m TVD MSL) and the Oil-Water-Contact was penetrated at 2011 m (1565.8 m TVD MSL), both contacts in the Heather Formation. Six cores were taken. Core one and two and the upper part of core three were cut in the Sognefjord Formation. The rest of the cores were cut in the Heather B Formation. No fluid sample was taken.
    Well 31/2-17 A was kicked of from 31/2-17 S at 909 m and drilled to TD at 1924 m in the Middle Jurassic Fensfjord Formation. No significant technical problem occurred. The well bore was drilled with KCl/brine/PHPA mud from kick-off to 1012 m and with oil based mud from 1012 m to TD. Seven m of Draupne Formation was penetrated at 1681.5 m. The Sognefjord Formation reservoir was encountered with gas at 1688.5 m. The Gas-Oil-Contact was penetrated at 1725.4 m (1543.0 m TVD MSL) in the Sognefjord Formation. The Oil-Water-Contact was penetrated at 1746.5 m (1558.1 m TVD MSL) also in the Sognefjord Formation. Five cores were taken. Core one, two, three and the upper part of core four were cut in the Sognefjord Formation. Core no five was cut in the Heater Formation. No fluid sample was taken.
    Well 31/2-17 B was kicked off from 31/2-17 A at 1645 m. The well angle was built up to approximately 90 degrees and was drilled to TD at 1838 m after 147 m nearly horizontal drilling in the Sognefjord Formation gas zone. The junk bonnet from the 9 5/8" liner running was accidentally left in the hole and 2 days were spent fishing for it, otherwise no significant technical problem occurred in this hole. The well bore was drilled with oil-based mud from kick-off to TD. Five m of Draupne Formation was penetrated at 1686 m. The Sognefjord Formation reservoir was encountered with gas at 1691 m. As expected no GOC was encountered, but the GOC is assumed to be the same as in well bore 31/2-17 A. One horizontal core (2.8 m) was taken at TD. Only MWD logs were run. No fluid sample was taken.
    31/2-17 S and 31/2-17A were permanently abandoned, while well 31/2-17 B was temporary plugged and suspended for later re-entry. The wells were classified as oil and gas appraisals.
    Testing
    No drill stem test was performed in the well bores.

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1833.5
    1836.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    2.5
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 1833-1836m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    1833-1836m

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    365
    803
    1412
    1412
    1454
    1501
    1668
    1686
    1686
    1691

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    20.96

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MWD - GR RES DIR
    1642
    1807

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    451.0
    36
    452.0
    0.00
    LOT
    INTERM.
    18 5/8
    906.0
    26
    909.0
    0.00
    LOT
    INTERM.
    13 3/8
    1642.0
    17 1/2
    1644.0
    1.33
    LOT
    INTERM.
    9 5/8
    1815.0
    12 1/4
    1838.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1764
    1.25
    30.0
    OIL BASED
    1815
    1.25
    28.0
    OIL BASED
    1829
    1.26
    31.0
    OIL BASED
    1838
    1.26
    31.0
    OIL BASED