Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

31/2-18

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    31/2-18
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    31/2-18
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    NH 9101- REKKE 1446 & KOLONNE 2042
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Hydro Produksjon AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    741-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    23
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    15.09.1992
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    07.10.1992
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    07.10.1994
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    28.05.2003
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    PALEOCENE
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    NO FORMAL NAME
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    LATE JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    SOGNEFJORD FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    26.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    340.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    1711.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1711.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    1.6
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    71
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIDDLE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    FENSFJORD FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 54' 10.49'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 34' 41.79'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6752271.73
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    531373.19
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    1988

  • Wellbore history
    General
    The purpose of well 31/2-18 was to appraise the structure and oil bearing potential of a fault block in the northern part of the Troll West Gas province (TWGP). The objectives for drilling well 31/2-18 were to evaluate the structure for future development of oil producing wells in the TWGP-North area, and to determine the degree of development required to efficiently develop the oil reservoir in the TWGP-North area. Well 31/2-18A was drilled as a pre-planned sidetrack to Well 31/2-18 in order to evaluate the hydrocarbon potential of the Krossfjord Formation. The primary objective of the sidetrack was to evaluate a seismic anomaly, or "flat spot" which had been identified in the Krossfjord Formation. The location of the anomaly was situated 240 m to the northeast in an up thrown block, adjacent to the original well.
    Operations
    Appraisal well 31/2-18 was spudded with the semi-submersible installation "Treasure Saga" on 15 September 1992, and drilled to a total depth of 1711 m in the Middle Jurassic Fensfjord Formation. The well was drilled with seawater and hi-vis pills down to 940 m and with KCl/Polymer mud from 940 m to TD.
    Palaeocene sand was encountered below base Våle Formation, from 1519.9 m to 1528.8 m. This sand is in direct contact with the underlying Late Jurassic Sognefjord Formation, which was encountered over the interval 1528.8 m - 1642.7 m. Gas was proven all through these sands from top of the Palaeocene sand down to 1571.2 m in the Sognefjord Formation. A thin oil leg was identified, with an oil-water contact at 1582.0 m. Sixteen good RFT pressure measurements, including segregated samples at 1575 m and 1582 m, were taken in one run over the interval 1522 m & 1689.5 m. The interval from 1498 m to 1678.5 m (Lower Rogaland Group including the Palaeocene sand, Sognefjord Formation, and Heather Formation) was cored in twelve cores with 86 100 % recovery.
    After running wire line logs, well 31/2-18 A was sidetracked with "Treasure Saga" from the original well on 7 October 1992. The sidetrack was initiated at 1470 m, just below the 9-5/8" casing shoe, and reached a total depth of 2005 m in the Krossfjord Formation. The sidetrack was drilled with KCl/Polymer mud.
    Equivalent to the primary well bore the Våle Formation occurred from 1497 m to 1520 m, on top of a 9.6 m thick Paleocene sand. This sand was found gas bearing and in communication with the underlying Sognefjord Formation. The Sognefjord Formation was encountered between 1529.6 m and 1654.5 m and proved to be gas bearing down to 1572.9 m MD (1570.8 m TVD RKB). A thin oil zone was identified between 1572.9 m and 1584.5 m, (1570.8 - 1581.9 m TVD RKB). The Krossfjord Formation was encountered at 1915.5 m, and was found to be oil bearing from 1915.5 m to 1925.1 m, (1828.5 - 1835.0 m TVD RKB). Two segregated samples at 1919.3 m and 1584 m and a total of 20 pressure measurements and were taken in two RFT runs. No conventional cores were cut in the sidetrack.
    After running wire line logs, the well was plugged back, without testing, to the 9-5/8" casing shoe on 13 October 1992. Wellbore 31/2-18 was subsequently permanently plugged and abandoned as an oil and gas appraisal well on 17 October 1992.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    950.00
    1710.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1498.0
    1516.0
    [m ]
    2
    1516.0
    1533.5
    [m ]
    3
    1534.0
    1551.8
    [m ]
    4
    1552.0
    1570.0
    [m ]
    5
    1570.0
    1588.0
    [m ]
    6
    1588.0
    1599.0
    [m ]
    7
    1599.0
    1608.9
    [m ]
    8
    1610.5
    1627.1
    [m ]
    9
    1628.5
    1638.1
    [m ]
    10
    1638.5
    1653.4
    [m ]
    11
    1654.0
    1666.5
    [m ]
    12
    1666.5
    1678.5
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    175.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 1498-1503m
    Core photo at depth: 1503-1508m
    Core photo at depth: 1508-1513m
    Core photo at depth: 1513-1516m
    Core photo at depth: 1516-1521m
    1498-1503m
    1503-1508m
    1508-1513m
    1513-1516m
    1516-1521m
    Core photo at depth: 1521-1526m
    Core photo at depth: 1526-1531m
    Core photo at depth: 1531-1534m
    Core photo at depth: 1534-1539m
    Core photo at depth: 1539-1544m
    1521-1526m
    1526-1531m
    1531-1534m
    1534-1539m
    1539-1544m
    Core photo at depth: 1544-1549m
    Core photo at depth: 1549-1552m
    Core photo at depth: 1552-1557m
    Core photo at depth: 1557-1562m
    Core photo at depth: 1562-1567m
    1544-1549m
    1549-1552m
    1552-1557m
    1557-1562m
    1562-1567m
    Core photo at depth: 1567-1570m
    Core photo at depth: 1570-1575m
    Core photo at depth: 1575-1580m
    Core photo at depth: 1580-1585m
    Core photo at depth: 1585-1588m
    1567-1570m
    1570-1575m
    1575-1580m
    1580-1585m
    1585-1588m
    Core photo at depth: 1588-1593m
    Core photo at depth: 1593-1598m
    Core photo at depth: 1598-1599m
    Core photo at depth: 1599-1604m
    Core photo at depth: 1604-1607m
    1588-1593m
    1593-1598m
    1598-1599m
    1599-1604m
    1604-1607m
    Core photo at depth: 1610-1615m
    Core photo at depth: 1615-1620m
    Core photo at depth: 1620-1625m
    Core photo at depth: 1625-1627m
    Core photo at depth: 1628-1633m
    1610-1615m
    1615-1620m
    1620-1625m
    1625-1627m
    1628-1633m
    Core photo at depth: 1633-1638m
    Core photo at depth: 1638-1638m
    Core photo at depth: 1638-1643m
    Core photo at depth: 1643-1648m
    Core photo at depth: 1648-1653m
    1633-1638m
    1638-1638m
    1638-1643m
    1643-1648m
    1648-1653m
    Core photo at depth: 1653-1654m
    Core photo at depth: 1654-1659m
    Core photo at depth: 1659-1664m
    Core photo at depth: 1664-1667m
    Core photo at depth: 1667-1671m
    1653-1654m
    1654-1659m
    1659-1664m
    1664-1667m
    1667-1671m
    Core photo at depth: 1671-1676m
    Core photo at depth: 1676-1679m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    1671-1676m
    1676-1679m

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1524.0
    [m]
    C
    RRI

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    366
    670
    1220
    1220
    1266
    1337
    1497
    1519
    1529
    1529
    1643
    1688

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.22

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    20.94

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    DLL MSFL DSI SP GR
    1450
    1706
    FMI GR
    1510
    1704
    LDL CNL AIL NGL
    1450
    1708
    LSS LDL CAL AMS GR
    365
    938
    LSS LDL CAL AMS GR
    921
    1450
    MWD - YGR RES DIR
    372
    1498
    RFT HP GR
    1522
    1589
    RFT HP GR
    1575
    1575
    RFT HP GR
    1582
    1582
    RFT HP GR
    1582
    1582
    VSP
    1000
    1700

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    453.0
    36
    453.0
    0.00
    LOT
    INTERM.
    18 5/8
    921.0
    24
    940.0
    1.73
    LOT
    INTERM.
    9 5/8
    1450.0
    12 1/4
    1465.0
    1.64
    LOT
    OPEN HOLE
    1711.0
    8 1/2
    1711.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    453
    1.05
    WATER BASED
    518
    1.05
    WATER BASED
    940
    1.20
    WATER BASED
    1344
    1.35
    WATER BASED
    1350
    1.17
    28.0
    WATER BASED
    1435
    1.35
    25.0
    WATER BASED
    1465
    1.17
    13.0
    WATER BASED
    1503
    1.17
    27.0
    WATER BASED
    1534
    1.17
    28.0
    WATER BASED
    1570
    1.17
    27.0
    WATER BASED
    1610
    1.17
    27.0
    WATER BASED
    1639
    1.17
    28.0
    WATER BASED
    1678
    1.17
    27.0
    WATER BASED
    1711
    1.17
    29.0
    WATER BASED

  • Thin sections at the Norwegian Offshore Directorate
    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    1500.50
    [m ]
    1501.50
    [m ]
    1515.10
    [m ]

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.14