Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

15/9-19 A

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/9-19 A
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/9-19
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    3D ST9407r96 & INLINE 1646& X-LINE 1711
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Den norske stats oljeselskap a.s
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    898-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    108
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    25.07.1997
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    09.11.1997
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    09.11.1999
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    15.12.2006
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    HUGIN FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    85.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4131.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3319.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    59
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    117
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SMITH BANK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 26' 9.25'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    1° 55' 47.05'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6477887.72
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    437506.71
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    3145

  • Wellbore history
    General
    The well 15/9-19 SR on the Theta Vest structure North of the Sleipner East Field proved oil in the Hugin Formation in 1993. The objective for the well 15/9-19 A, a side-track from this well, was to confirm a minimum economic hydrocarbon volume in the Hugin Formation and map the extension of the oil-bearing formation.
    General
    The well 15/9-19 SR on the Theta Vest structure North of the Sleipner East Field proved oil in the Hugin Formation in 1993. The objective for the well 15/9-19 A, a side-track from this well, was to confirm a minimum economic hydrocarbon volume in the Hugin Formation and map the extension of the oil-bearing formation.
    Operations and results
    Well 15/9-19 A was kicked off from 2178 m in well bore 15/9-19 SR on 25 July 1997, using the semi-submersible installation Byford Dolphin. The well was drilled through the Skagerrak Formation and terminated approximately 30 m TVD into the Triassic Smith Bank Formation at 4131 m (3318.5 m TVD RKB). The final acquisition programme immediately after reaching the total depth of the well was strongly affected by a labour conflict, which delayed the well operations for 32.5 days. The originally planned open hole electric logging program had to be terminated and the 7" casing run to TD in order to secure the well. The later cased hole logging failed due to tool problems. The well was drilled oil based with the Ultidril mud system (oil base consists of synthetic olefins) from kick-off to TD.
    Top of the Hugin Formation was penetrated at 3796.5 m (3015.5 m TVD RKB) approximately 60 m TVD deeper than prognosed. It was 153 m thick (TVD) and oil-bearing. The total oil column in the well was 80 m, but no clear oil-water contact was observed. The base of the reservoir was at 3919 m (-3126.5 m TVD RKB). Seven cores were cut in the interval 3838 m to 4017 m in the Hugin and Skagerrak Formations, with a total recovery of 177.6 m. One attempt was made to run FMT on PCL for pressure points and fluid sampling. The run failed for technical reasons and no further attempts were made due to the labour conflct.
    The well was permanently abandoned on 9 November 1997 as an oil appraisal.
    Testing
    Three tests were performed in order to evaluate the well, one in the water zone and two in the oil zone.
    Test 1 at 3952 - 3958 m (3159.8 - 3165.5 m TVD RKB), was in the water zone to obtain water samples due to MDT failure during wire line logging. Four good samples were obtained, indicating similar formation water as in other wells in the Sleipner area. Maximum recorded temperature in this test was 112.7 deg C.
    Test 2A at 3885.5 - 3888.5 m (3100 - 3102.5 m TVD RKB) flowed 300 Sm3 oil and 27000 Sm3 gas /day through a 38/64" choke during the cleanup flow. The corresponding GOR was 90 Sm3/Sm3, the oil density was 0.892 g/cm3, and the gas gravity was 0.738 (air = 1) with 2.5 ppm H2S and 3% CO2. The temperature recorded in this flow period was 112.3 deg C.
    Test 2B at 3885.5 - 3888.5 m + 3826 -3865 m (3100 - 3102.5 m + 3046.2 - 3081.3 m TVD RKB flowed 528 Sm3 oil and 38107 Sm3 gas /day through a 34/64" choke during the main flow. The corresponding GOR was 72 Sm3/Sm3, the average oil density was 0.902 g/cm3, and the average gas gravity was 0.730 (air = 1) with 2.8 ppm H2S and 3.5% CO2. The temperature recorded in this flow period was 110.8 deg C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    2200.00
    4131.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3837.0
    3852.2
    [m ]
    2
    3854.0
    3881.7
    [m ]
    3
    3881.5
    3908.4
    [m ]
    4
    3908.5
    3934.5
    [m ]
    5
    3935.5
    3963.0
    [m ]
    6
    3963.0
    3991.0
    [m ]
    7
    3991.0
    4016.7
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    177.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 3837-3842m
    Core photo at depth: 3842-3847m
    Core photo at depth: 3847-3852m
    Core photo at depth: 3852-3853m
    Core photo at depth: 3854-3859m
    3837-3842m
    3842-3847m
    3847-3852m
    3852-3853m
    3854-3859m
    Core photo at depth: 3859-3864m
    Core photo at depth: 3864-3869m
    Core photo at depth: 3869-3874m
    Core photo at depth: 3874-3879m
    Core photo at depth: 3879-3881m
    3859-3864m
    3864-3869m
    3869-3874m
    3874-3879m
    3879-3881m
    Core photo at depth: 3881-3886m
    Core photo at depth: 3886-3891m
    Core photo at depth: 3891-3896m
    Core photo at depth: 3896-3901m
    Core photo at depth: 3901-3906m
    3881-3886m
    3886-3891m
    3891-3896m
    3896-3901m
    3901-3906m
    Core photo at depth: 3906-3908m
    Core photo at depth: 3908-3913m
    Core photo at depth: 3913-3918m
    Core photo at depth: 3918-3923m
    Core photo at depth: 3923-3928m
    3906-3908m
    3908-3913m
    3913-3918m
    3918-3923m
    3923-3928m
    Core photo at depth: 3928-3933m
    Core photo at depth: 3933-3934m
    Core photo at depth: 3935-3940m
    Core photo at depth: 3940-3945m
    Core photo at depth: 3945-3950m
    3928-3933m
    3933-3934m
    3935-3940m
    3940-3945m
    3945-3950m
    Core photo at depth: 3950-3955m
    Core photo at depth: 3955-3960m
    Core photo at depth: 3960-3963m
    Core photo at depth: 3963-3968m
    Core photo at depth: 3968-3973m
    3950-3955m
    3955-3960m
    3960-3963m
    3963-3968m
    3968-3973m
    Core photo at depth: 3973-3978m
    Core photo at depth: 3978-3983m
    Core photo at depth: 3983-3988m
    Core photo at depth: 3988-3991m
    Core photo at depth: 3991-3996m
    3973-3978m
    3978-3983m
    3983-3988m
    3988-3991m
    3991-3996m
    Core photo at depth: 3996-4001m
    Core photo at depth: 4001-4006m
    Core photo at depth: 4006-4011m
    Core photo at depth: 4011-4016m
    Core photo at depth: 4016-4017m
    3996-4001m
    4001-4006m
    4006-4011m
    4011-4016m
    4016-4017m

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    3160.0
    [m]
    DC
    STATOIL
    3170.0
    [m]
    DC
    STATOI
    3180.0
    [m]
    DC
    STATOI
    3190.0
    [m]
    DC
    STATOI
    3200.0
    [m]
    DC
    STATOI
    3210.0
    [m]
    DC
    STATOI
    3220.0
    [m]
    DC
    STATOI
    3240.0
    [m]
    DC
    STATOI
    3250.0
    [m]
    DC
    STATOI
    3260.0
    [m]
    DC
    STATOI
    3280.0
    [m]
    DC
    STATOI
    3290.0
    [m]
    DC
    STATOI
    3300.0
    [m]
    DC
    STATOI
    3310.0
    [m]
    DC
    STATOI
    3320.0
    [m]
    DC
    STATOI
    3500.0
    [m]
    DC
    GEOSTR
    3510.0
    [m]
    DC
    GEOSTR
    3520.0
    [m]
    DC
    GEOSTR
    3530.0
    [m]
    DC
    GEOSTR
    3540.0
    [m]
    DC
    GEOSTR
    3550.0
    [m]
    DC
    GEOSTR
    3560.0
    [m]
    DC
    GEOSTR
    3570.0
    [m]
    DC
    GEOSTR
    3580.0
    [m]
    DC
    GEOSTR
    3590.0
    [m]
    DC
    GEOSTR
    3600.0
    [m]
    DC
    GEOSTR
    3610.0
    [m]
    DC
    GEOSTR
    3620.0
    [m]
    DC
    GEOSTR
    3630.0
    [m]
    DC
    GEOSTR
    3640.0
    [m]
    DC
    GEOSTR
    3651.0
    [m]
    DC
    GEOSTR
    3657.0
    [m]
    DC
    GEOSTR
    3663.0
    [m]
    DC
    GEOSTR
    3669.0
    [m]
    DC
    GEOSTR
    3675.0
    [m]
    DC
    GEOSTR
    3681.0
    [m]
    DC
    GEOSTR
    3687.0
    [m]
    DC
    GEOSTR
    3693.0
    [m]
    DC
    GEOSTR
    3699.0
    [m]
    DC
    GEOSTR
    3705.0
    [m]
    DC
    GEOSTR
    3708.0
    [m]
    DC
    GEOSTR
    3714.0
    [m]
    DC
    GEOSTR
    3720.0
    [m]
    DC
    GEOSTR
    3726.0
    [m]
    DC
    GEOSTR
    3732.0
    [m]
    DC
    GEOSTR
    3738.0
    [m]
    DC
    GEOSTR
    3744.0
    [m]
    DC
    GEOSTR
    3750.0
    [m]
    DC
    GEOSTR
    3756.0
    [m]
    DC
    GEOSTR
    3762.0
    [m]
    DC
    GEOSTR
    3768.0
    [m]
    DC
    GEOSTR
    3774.0
    [m]
    DC
    GEOSTR
    3780.0
    [m]
    DC
    GEOSTR
    3786.0
    [m]
    DC
    GEOSTR
    3792.0
    [m]
    DC
    GEOSTR
    3798.0
    [m]
    DC
    GEOSTR
    3804.0
    [m]
    DC
    GEOSTR
    3810.0
    [m]
    DC
    GEOSTR
    3816.0
    [m]
    DC
    GEOSTR
    3822.0
    [m]
    DC
    GEOSTR
    3828.0
    [m]
    DC
    GEOSTR
    3834.0
    [m]
    DC
    GEOSTR
    3837.2
    [m]
    C
    GEOSTR
    3837.2
    [m]
    C
    GEOSTRAT
    3841.4
    [m]
    C
    GEOSTR
    3841.4
    [m]
    C
    GEOSTR
    3846.0
    [m]
    C
    GEOSTR
    3851.8
    [m]
    C
    GEOSTR
    3854.8
    [m]
    C
    GEOSTR
    3859.7
    [m]
    C
    GEOSTR
    3870.9
    [m]
    C
    GEOSTR
    3876.7
    [m]
    C
    GEOSTR
    3881.6
    [m]
    C
    GEOSTR
    3887.5
    [m]
    C
    GEOSTR
    3891.2
    [m]
    C
    GEOSTR
    3894.1
    [m]
    C
    GEOSTR
    3898.2
    [m]
    C
    GEOSTR
    3908.0
    [m]
    C
    GEOSTR
    3913.6
    [m]
    C
    GEOSTR
    3919.0
    [m]
    C
    GEOSTR
    3919.2
    [m]
    C
    GEOSTR
    3923.6
    [m]
    C
    GEOSTR
    3927.7
    [m]
    C
    GEOSTR
    3931.3
    [m]
    C
    GEOSTR
    3937.5
    [m]
    C
    GEOSTR
    3945.5
    [m]
    C
    GEOSTR
    3950.5
    [m]
    C
    GEOSTR
    3957.4
    [m]
    C
    GEOSTR
    3964.4
    [m]
    C
    GEOSTR
    3972.2
    [m]
    C
    GEOSTR
    3976.4
    [m]
    C
    GEOSTR
    3983.5
    [m]
    C
    GEOSTR
    3991.2
    [m]
    C
    GEOSTR
    3998.2
    [m]
    C
    GEOSTR
    3998.5
    [m]
    C
    GEOSTR
    4001.7
    [m]
    C
    GEOSTR
    4007.5
    [m]
    C
    GEOSTR
    4011.7
    [m]
    C
    GEOSTR
    4017.0
    [m]
    DC
    GEOSTR
    4026.0
    [m]
    DC
    GEOSTR
    4035.0
    [m]
    DC
    GEOSTR
    4044.0
    [m]
    DC
    GEOSTR
    4053.0
    [m]
    DC
    GEOSTR
    4062.0
    [m]
    DC
    GEOSTR
    4071.0
    [m]
    DC
    GEOSTR
    4080.0
    [m]
    DC
    GEOSTR
    4089.0
    [m]
    DC
    GEOSTR
    4098.0
    [m]
    DC
    GEOSTR
    4107.0
    [m]
    DC
    GEOSTR
    4116.0
    [m]
    DC
    GEOSTR
    4125.0
    [m]
    DC
    GEOSTR
    4131.0
    [m]
    DC
    GEOSTR

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    TEST1A
    3885.00
    3889.00
    27.10.1997 - 16:15
    YES
    DST
    TEST2B
    3865.00
    3826.00
    30.10.1997 - 22:50
    YES

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.72

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    21.49

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    3099
    3102
    15.1
    2.0
    3046
    3081
    13.5
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    3.000
    21.000
    112
    2.0
    9.000
    9.000
    32.000
    111
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    200
    27000
    0.892
    0.738
    90
    2.0
    528
    38107
    0.902
    0.730
    72

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    HDIL MAC DGR CHT
    2178
    2754
    HDIL MAC ZDL CND SP CAL CHT PCL
    3487
    4126
    MAC GR
    2490
    3510
    MWD - DPR TF5A
    2178
    4131
    PERF
    3952
    3958
    SBT GR CCL
    2592
    3986
    VSP GR
    980
    2670
    VSP GR PCL
    2760
    4080

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    INTERM.
    9 5/8
    2178.0
    12 1/4
    2179.0
    0.00
    LOT
    LINER
    7
    4044.0
    8 1/2
    4044.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    2178
    1.50
    51.0
    ULTIDRILL
    2768
    1.50
    41.0
    ULTIDRILL
    3390
    1.55
    34.0
    ULTIDRILL
    3573
    1.55
    32.0
    ULTIDRILL
    3600
    1.55
    49.0
    ULTIDRILL
    3955
    1.47
    52.0
    ULTIDRILL
    4017
    1.55
    40.0
    ULTIDRILL
    4131
    1.48
    45.0
    ULTIDRILL