Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
12.11.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6507/7-6

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/7-6
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/7-6
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    CN 8502-608 & SP.268
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Conoco Norway Inc.
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    524-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    46
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    23.07.1986
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    06.09.1986
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    06.09.1988
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    17.09.2007
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    FANGST GP
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    BÅT GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    350.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2525.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2470.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.7
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    84
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ÅRE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    65° 21' 30.03'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 19' 10.35'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7249616.27
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    421821.65
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    922

  • Wellbore history
    Well 6507/7 6 is an appraisal well on the crest of the Heidrun field structure on Haltenbanken off shore Mid Norway. The structure is a fault wedge. The main objectives of the well were to establish the Ti1je gas/oil contact, to define Tilje and Åre oil properties, and to investigate the Åre oil/water contact. In addition, the well was expected to prove Fangst erosion and established lateral continuity of Tilje reservoir properties.
    Operations and results
    Appraisal well 6507/7 6 was spudded with the semi-submersible installation Nortrym on 23 July 1986 and drilled to TD at 2525 m in Early Jurassic sediments of the Åre Formation. At 419 m the drill string torqued up and spun out five joints below the kelly, dropping the string to the seabed. The well was re-spudded after being moved approximately 8 m, and this time drilling proceeded without significant problems. The well was drilled with seawater and pre-hydrated gel sweeps down to 1030 m and with KCl/polymer mud from 1030 m to TD.
    Oil shows were recorded in 3 m thick sandstone at 2096 m in the Cretaceous. A marked unconformity separates the Middle Jurassic from the overlying Late Cretaceous sequence. The total hiatus was from Aalenian-Bajocian to Campanian-Santonian. Top Middle Jurassic Fangst Group, Ile Formation was encountered at 2144.5 m and was gas bearing. From good quality RFT pressure data, cores, and electric logs a gas/oil contact was established at 2339 m in the Tilje Formation and the oil/water contact at 2440 m in the Åre Formation. Shows continued down to 2445. Below this depth no shows were reported.
    A total of 191 m core was recovered from the well. Two cores were cut from the Early Cretaceous through the Fangst Group and into the top Båt Group (2129 - 2185 m), and eight cores were cut from the gas zone in the lower part of the Tilje Formation, through the OWC and into the Åre Formation (2305 - 2462 m). One RFT run was made in the 12 1/4" hole. A water sample was attempted at 2457m without any recovery. The gas gradient was 0.073 psi/ft (0.169 g/cc). Two oil gradients were found. To 2390 m the gradient was 0.327 psi/ft (0.754 g/cc). Passing through the upper Åre Formation siltstone/claystone bed a pressure increase was encountered and the oil column down to the oil/water contact exhibited a higher oil gradient of 0.362 psi/ft (0.834 g/cc). The water gradient was 0.446 psi/ft (1.028 g/cc).
    The well was permanently abandoned on 6 September 1986 as a gas and oil appraisal.
    Testing
    Two DST's were performed in this well.
    DST 1 tested the combined intervals 2411.5 ? 2415 and 2421 ? 2424 m in the Åre Formation. Maximum flow was 782 Sm3 oil and 46100 Sm3 gas /day through a 90.5/64" choke. The GOR was 59 Sm3/Sm3, the oil gravity was 23 deg API, and the gas gravity was 0.627 with 3 % CO2 and no detectable H2S.
    DST 2 tested the interval 2348.5 ? 2365 m in the Tilje Formation. The well flowed at maximum rates 628 Sm3 oil and 61450 Sm3 gas /day through a 132/64" choke. The GOR was 98 Sm3/Sm3, the oil gravity was 27 deg API, and the gas gravity was 0.614 with 1.7 % CO2 and no detectable H2S. Large amounts of sand were also produced in DST 2, leading to a pre-mature end of the flow period. The recorded down-hole temperatures were 83.3 and 78.9 deg C in DST 1 and DST 2 respectively.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1040.00
    2524.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2129.0
    2156.7
    [m ]
    2
    2157.9
    2184.4
    [m ]
    3
    2305.0
    2306.6
    [m ]
    4
    2315.0
    2341.9
    [m ]
    5
    2344.0
    2363.3
    [m ]
    6
    2364.5
    2390.4
    [m ]
    7
    2392.5
    2404.7
    [m ]
    8
    2405.0
    2419.8
    [m ]
    9
    2424.0
    2441.0
    [m ]
    10
    2442.0
    2460.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    190.2
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    2129.0
    [m]
    C
    OD
    2130.1
    [m]
    C
    OD
    2131.2
    [m]
    C
    OD
    2133.4
    [m]
    C
    OD
    2134.5
    [m]
    C
    OD
    2135.5
    [m]
    C
    OD
    2136.4
    [m]
    C
    OD
    2137.4
    [m]
    C
    OD
    2138.5
    [m]
    C
    OD
    2139.6
    [m]
    C
    OD
    2140.5
    [m]
    C
    OD
    2141.5
    [m]
    C
    OD
    2142.5
    [m]
    C
    OD
    2142.9
    [m]
    C
    OD
    2143.6
    [m]
    C
    OD
    2144.5
    [m]
    C
    OD
    2145.5
    [m]
    C
    OD
    2148.8
    [m]
    C
    OD
    2156.5
    [m]
    C
    OD
    2171.8
    [m]
    C
    OD
    2175.7
    [m]
    C
    OD
    2180.9
    [m]
    C
    OD

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    DST1
    2411.50
    2424.00
    24.08.1986 - 00:00
    YES
    DST
    DST2
    2348.50
    2365.00
    30.08.1984 - 00:00
    YES
    DST
    TEST2
    0.00
    0.00
    30.08.1986 - 00:00
    YES

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    375
    375
    1495
    1852
    1852
    1935
    1935
    1967
    2016
    2145
    2159
    2190
    2369

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.26

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.67
    pdf
    0.14

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    1.56
    pdf
    11.24
    pdf
    7.86

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    2424
    2412
    35.9
    2.0
    2349
    2365
    52.4
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    4.000
    24.000
    2.0
    2.000
    22.000
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    782
    46100
    0.918
    0.617
    59
    2.0
    628
    61450
    0.895
    0.617
    98

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL VDL GR CCL
    496
    2045
    CBL VDL GR CCL
    1700
    2478
    DIL SLS GR SP
    2079
    2524
    DLL MSFL GR
    2079
    2521
    LDL CNL NGL
    2079
    2525
    MSD
    2085
    2523
    MWD - GR RES DIR
    472
    2525
    RFT HP
    2149
    2504
    RFT SG
    2149
    2504
    SHDT FAST CHANNELS
    2079
    2524
    SHDT GEOMETRY
    2079
    2524
    VSP SAT
    1800
    2475

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    473.0
    36
    474.0
    0.00
    LOT
    SURF.COND.
    20
    1024.0
    26
    1030.0
    1.52
    LOT
    INTERM.
    13 3/8
    2080.0
    17 1/2
    2087.0
    1.66
    LOT
    INTERM.
    9 5/8
    2510.0
    12 1/4
    2525.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    419
    1.03
    WATERBASED
    23.07.1986
    1030
    1.14
    20.0
    12.9
    WATERBASED
    31.07.1986
    1303
    1.16
    17.0
    8.6
    WATERBASED
    04.08.1986
    1769
    1.38
    24.0
    9.1
    WATERBASED
    04.08.1986
    1836
    1.39
    30.0
    9.6
    WATERBASED
    04.08.1986
    2050
    1.42
    27.0
    8.1
    WATERBASED
    05.08.1986
    2080
    1.26
    WATERBASED
    08.08.1986
    2087
    1.44
    28.0
    8.6
    WATERBASED
    06.08.1986
    2087
    0.00
    28.0
    8.6
    WATERBASED
    07.08.1986
    2305
    1.27
    WATERBASED
    11.08.1986
    2305
    0.00
    WATERBASED
    12.08.1986
    2525
    1.26
    WATERBASED
    18.08.1986
    2525
    0.00
    WATERBASED
    21.08.1986
    2525
    0.00
    WATERBASED
    19.08.1986

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.27