Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

15/6-4

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/6-4
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/6-4
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Esso Exploration and Production Norway A/S
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    159-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    50
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    28.06.1976
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    16.08.1976
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    16.08.1978
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    28.03.2014
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    111.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3505.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3504.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3.5
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    99
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SKAGERRAK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 37' 34.39'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    1° 48' 19.94'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6499198.96
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    430632.04
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    319

  • Wellbore history
    General
    Well 15/6-4 was drilled on the southern end of the Gudrun Terrace in the North Sea. The objective was to test the hydrocarbon potential of Middle Jurassic (Dogger) sandstones.
    Operations and results
    Wildcat well 15/6-4 was spudded with the semi-submersible installation Norjarl on 28 June 1976 and drilled to TD at 3505 m in the Triassic Smith Bank Formation. The well was drilled water based with lignosulphonate/CMC/lignite below 3097 m
    Top Draupne Formation was encountered at 3157 m. The target sandstone unit was encountered at 3222 m and was found to be water bearing.
    Four cores were cut. Cores 1 and 2 were cut from 3226.3 m to 3247.6 m and cores 3 and 4 were cut from 3271.5 m to 3308 m. FIT fluid samples were taken on wire line at 3312 m (small amounts of gas and 10.2 l water) and at 3222.5 m (small amounts of gas and 10.2 l water).
    The well was permanently abandoned on 16 August as a dry well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    180.00
    3505.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    10585.0
    10604.0
    [ft ]
    2
    10607.0
    10651.2
    [ft ]
    3
    3271.3
    3290.1
    [m ]
    4
    3290.1
    3308.1
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    56.1
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1100.0
    [m]
    DC
    1130.0
    [m]
    DC
    1130.0
    [m]
    SWC
    1160.0
    [m]
    DC
    1190.0
    [m]
    DC
    1220.0
    [m]
    DC
    1240.0
    [m]
    DC
    1250.0
    [m]
    DC
    1250.0
    [m]
    SWC
    1280.0
    [m]
    DC
    1310.0
    [m]
    DC
    1340.0
    [m]
    DC
    1370.0
    [m]
    DC
    1400.0
    [m]
    DC
    1410.0
    [m]
    DC
    1430.0
    [m]
    DC
    1460.0
    [m]
    DC
    1490.0
    [m]
    DC
    1500.0
    [m]
    DC
    1520.0
    [m]
    DC
    1550.0
    [m]
    DC
    1580.0
    [m]
    DC
    1610.0
    [m]
    DC
    1640.0
    [m]
    DC
    1650.0
    [m]
    DC
    1670.0
    [m]
    DC
    1700.0
    [m]
    DC
    1700.0
    [m]
    SWC
    1720.0
    [m]
    DC
    1730.0
    [m]
    DC
    1750.0
    [m]
    SWC
    1760.0
    [m]
    DC
    1790.0
    [m]
    DC
    1820.0
    [m]
    DC
    1845.0
    [m]
    SWC
    1850.0
    [m]
    DC
    1850.0
    [m]
    DC
    1880.0
    [m]
    DC
    1885.0
    [m]
    SWC
    1910.0
    [m]
    DC
    1940.0
    [m]
    DC
    1970.0
    [m]
    DC
    1995.0
    [m]
    SWC
    2000.0
    [m]
    DC
    2030.0
    [m]
    DC
    2040.0
    [m]
    DC
    2050.0
    [m]
    DC
    2050.0
    [m]
    SWC
    2060.0
    [m]
    DC
    2090.0
    [m]
    DC
    2100.0
    [m]
    DC
    2110.0
    [m]
    DC
    2120.0
    [m]
    DC
    2130.0
    [m]
    DC
    2150.0
    [m]
    SWC
    2160.0
    [m]
    DC
    2176.0
    [m]
    SWC
    2180.0
    [m]
    DC
    2190.0
    [m]
    DC
    2200.0
    [m]
    DC
    2220.0
    [m]
    DC
    2220.0
    [m]
    SWC
    2249.0
    [m]
    SWC
    2250.0
    [m]
    DC
    2270.0
    [m]
    DC
    2280.0
    [m]
    DC
    2290.0
    [m]
    DC
    2295.0
    [m]
    SWC
    2300.0
    [m]
    DC
    2310.0
    [m]
    DC
    2310.0
    [m]
    SWC
    2326.0
    [m]
    SWC
    2340.0
    [m]
    DC
    2370.0
    [m]
    DC
    2400.0
    [m]
    DC
    2408.0
    [m]
    SWC
    2430.0
    [m]
    DC
    2433.0
    [m]
    SWC
    2460.0
    [m]
    DC
    2490.0
    [m]
    DC
    2490.0
    [m]
    DC
    2520.0
    [m]
    DC
    2550.0
    [m]
    DC
    2580.0
    [m]
    DC
    2612.0
    [m]
    DC
    2635.0
    [m]
    SWC
    2642.0
    [m]
    DC
    2672.0
    [m]
    DC
    2702.0
    [m]
    DC
    2732.0
    [m]
    DC
    2762.0
    [m]
    DC
    2792.0
    [m]
    DC
    2822.0
    [m]
    DC
    2852.0
    [m]
    DC
    2882.0
    [m]
    DC
    2912.0
    [m]
    DC
    2942.0
    [m]
    DC
    2972.0
    [m]
    DC
    3002.0
    [m]
    DC
    3032.0
    [m]
    DC
    3062.0
    [m]
    DC
    3065.0
    [m]
    SWC
    3092.0
    [m]
    DC
    3122.0
    [m]
    DC
    3131.0
    [m]
    DC
    3152.0
    [m]
    DC
    3160.0
    [m]
    SWC
    3161.0
    [m]
    DC
    3170.0
    [m]
    SWC
    3170.0
    [m]
    DC
    3175.0
    [m]
    SWC
    3180.0
    [m]
    SWC
    3182.0
    [m]
    DC
    3185.0
    [m]
    SWC
    3190.0
    [m]
    SWC
    3205.0
    [m]
    SWC
    3207.0
    [m]
    SWC
    3210.0
    [m]
    SWC
    3212.0
    [m]
    DC
    3213.0
    [m]
    SWC
    3215.0
    [m]
    SWC
    3218.0
    [m]
    SWC
    3218.0
    [m]
    DC
    3222.5
    [m]
    SWC
    3223.0
    [m]
    SWC
    3224.0
    [m]
    SWC
    3225.0
    [m]
    SWC
    3227.6
    [m]
    C
    3228.3
    [m]
    C
    RRI
    3228.5
    [m]
    C
    3228.8
    [m]
    C
    RRI
    3229.6
    [m]
    C
    3229.6
    [m]
    C
    3230.4
    [m]
    C
    3230.7
    [m]
    C
    3231.0
    [m]
    C
    3231.3
    [m]
    C
    3231.8
    [m]
    C
    RRI
    3231.8
    [m]
    C
    3232.8
    [m]
    C
    3233.2
    [m]
    C
    3234.4
    [m]
    C
    3234.6
    [m]
    C
    3234.8
    [m]
    C
    RRI
    3235.3
    [m]
    C
    3236.5
    [m]
    C
    3237.0
    [m]
    C
    3238.0
    [m]
    C
    3238.3
    [m]
    C
    3239.2
    [m]
    C
    3239.7
    [m]
    C
    3243.0
    [m]
    C
    3243.5
    [m]
    C
    3244.0
    [m]
    C
    RRI
    3244.0
    [m]
    C
    3244.4
    [m]
    C
    3244.9
    [m]
    C
    RRI
    3250.0
    [m]
    SWC
    3251.0
    [m]
    DC
    3263.0
    [m]
    SWC
    3267.5
    [m]
    SWC
    3272.0
    [m]
    DC
    3274.0
    [m]
    C
    RRI
    3279.3
    [m]
    C
    3283.9
    [m]
    C
    3287.0
    [m]
    C
    3290.5
    [m]
    C
    3294.0
    [m]
    C
    3295.4
    [m]
    C
    3297.2
    [m]
    C
    3298.1
    [m]
    C
    3307.6
    [m]
    C
    3308.0
    [m]
    C
    3311.0
    [m]
    DC
    3341.0
    [m]
    DC
    3350.0
    [m]
    SWC
    3365.0
    [m]
    DC
    3371.0
    [m]
    DC
    3400.0
    [m]
    DC
    3401.0
    [m]
    DC
    3431.0
    [m]
    DC
    3450.0
    [m]
    SWC
    3461.0
    [m]
    DC
    3488.0
    [m]
    DC
    3491.0
    [m]
    DC
    3505.0
    [m]
    DC
    3505.0
    [m]
    SWC

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.31
    pdf
    0.68
    pdf
    2.00

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    1.96
    pdf
    25.25

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    BHC SON
    170
    2742
    CBL
    1700
    2518
    CDM
    2776
    3505
    DLL
    2776
    3505
    FDC CNL
    2776
    3511
    ISF
    1079
    2753
    ISF SON
    379
    3505
    MUD
    170
    3505
    VELOCITY
    170
    3505

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    170.0
    36
    177.0
    0.00
    SURF.COND.
    20
    379.0
    26
    394.0
    0.00
    INTERM.
    13 3/8
    1083.0
    17 1/2
    1097.0
    0.00
    INTERM.
    9 5/8
    2775.0
    12 1/4
    2789.0
    0.00
    OPEN HOLE
    3530.0
    8 1/2
    3530.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    168
    1.06
    waterbased
    1097
    1.10
    waterbased
    2356
    1.16
    waterbased
    2758
    1.15
    waterbased
    2788
    1.16
    waterbased

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.21