Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.11.2024 - 09:09
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7122/7-2

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7122/7-2
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    BARENTS SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7122/7-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    NA9801 3D INLINE 680 & X-LINE 2784
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Agip AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1011-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    38
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    12.09.2001
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    19.10.2001
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    19.10.2001
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    19.10.2003
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    19.10.2003
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE TRIASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    TUBÅEN FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    18.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    377.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    1418.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1417.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3.7
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    36
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SNADD FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    71° 17' 28.46'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    22° 16' 57.22'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7910579.51
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    545915.01
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    34
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    4391

  • Wellbore history
    General
    The purpose for drilling the well 7122/7-2 was to appraise the potential of the Kapp Toscana Group in the central fault compartment of the Goliat structure, and to see if a deeper oil/water contact could be proved. The main, eastern compartment was proven oil bearing by the exploration well 7122/7-1 drilled in year 2000. The Goliat structure is a faulted structural closure in the crestal part of a major Northeast-Southwest trending rollover anticline situated in the southeastern part of the Hammerfest Basin.
    Operations and results
    The 7122/7-2 appraisal well was spudded with the semi-submersible installation West Alpha on 12 September 2001 and drilled to a total depth of 1418 m, 222 m into the Middle to Late Triassic Snadd Formation. A possible gas anomaly prognosed at 450 m proved to be a water bearing sand. Gas was detected at 610 m, but the pressure was low enough to be controlled by the drilling fluid hydrostatic pressure. No further indications of shallow gas were noted during the drilling of the pilot hole. The well was drilled with sea water and high viscous pre-hydrated bentonite mud down to 910 m and with Format brine / XC polymer / PAC mud from 910 m to TD.
    The top of Kapp Toscana Group was penetrated at 1078 m (1060 m TVD SS), 9 m above the prognosis. This was also the top of the main reservoir. The reservoir was oil bearing. The MDT pressure points gave an OWC at 1153.8 m (1135 m TVD SS). This is 14 m deeper than in the well 7122/7-1. A pressure difference of 1 bar between the two wells was observed in the oil zone. Good to very good shows were observed in cuttings, and conventional cores from 1078 m to 1153 m. Evidence of water wet sand was seen on core chips from 1155 m. Hydrogen sulphide was recorded as 6 to 25 ppm at approximately 1075 m. In the 12 1/4" hole section down to 1070 m total gas values predominantly ranged from 0.27% to 0.9%. At core point at 1075 m the gas content increased to 2.33%. From 1075 m to the base of coring at 1160 m, gas values ranged between 0.25 to 4.79%. Thereafter the background gasses decreased down to 0.15 near TD. Oil shows were noted above the reservoir from cuttings sample at 1062 m.
    Five bottom hole cores were cut from 1075 to 1160 m. Recovery was 82% to 100%. The cores confirmed the heterogeneity of the Kapp Toscana reservoir as observed in well 7122/7-1. For the first time in Norway &Half Moon aluminium" inner tube was used while coring. By this technique it was possible to take images in white and UV light of the full core immediately after the core was recovered. The core images were filed together with the core gamma and only hours after the core was on the drill floor all involved parties had a full description of the core with core gamma and images in white and UV light. A MDT fluid sample was taken at 1078 m in the top of the reservoir to check on the high H2S readings at that depth. No H2S was detected in the sample. A second MDT sample was taken at 1162 m. The well was permanently abandoned as an oil appraisal on 19 October 2001.
    Testing
    One DST was performed in the intervals 1078-1106 and 1127-1136.5 m in the Kapp Toscana Group. The best flow was 685 m3 oil and 40400 m3 gas per day from a 48/64" choke. This gives a GOR of 59 m3/m3 and the oil density was 33 deg API. No H2S was detected. Neither sand nor water was produced throughout the test.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    918.00
    1418.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1075.0
    1087.5
    [m ]
    2
    1089.0
    1105.4
    [m ]
    3
    1109.0
    1122.2
    [m ]
    4
    1123.0
    1135.5
    [m ]
    5
    1135.0
    1160.8
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    80.3
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1077.0
    [m]
    C
    ICHRON
    1084.0
    [m]
    C
    ICHRON
    1114.6
    [m]
    C
    ICHRON
    1141.9
    [m]
    C
    ICHRON
    1159.8
    [m]
    C
    ICHRON

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    0.00
    0.00
    OIL
    YES

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.19

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.46

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    .pdf
    1.83
    .PDF
    4.05

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    1078
    1136
    19.0
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    12.600
    36
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    685
    40415
    0.860
    59

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR APS HNGS
    900
    1419
    FMI DSI
    900
    1419
    HRLA PEX GR
    900
    1419
    MDT
    1080
    0
    MDT
    1162
    0
    MWD CDR-GR DIR RES
    910
    1075
    MWD CDR-GR DIR RES
    1075
    1418
    MWD CDR-GR DIR RES SONIC
    395
    910
    VSP
    465
    1415

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    36
    479.0
    30
    481.0
    0.00
    LOT
    SURF.COND.
    13 3/8
    900.0
    17 1/2
    910.0
    1.56
    LOT
    INTERM.
    9 5/8
    1418.0
    12 1/4
    1418.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    425
    1.06
    19.0
    SW/BENTONITE
    481
    1.06
    7.0
    SW/BENTONITE
    910
    1.06
    16.0
    SW/BENTONITE
    935
    1.25
    8.0
    FORMATE
    1075
    1.26
    11.0
    FORMATE
    1123
    1.26
    13.0
    FORMATE

  • Thin sections at the Norwegian Offshore Directorate
    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    1077.25
    [m ]
    1077.50
    [m ]
    1078.50
    [m ]
    1089.65
    [m ]
    1091.25
    [m ]
    1098.36
    [m ]
    1100.50
    [m ]
    1102.75
    [m ]
    1131.25
    [m ]
    1136.75
    [m ]
    1155.25
    [m ]
    1159.75
    [m ]

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.19