9/2-9 S
Export:
PDF
![PDF icon](https://factpages.sodir.no/Images/file-pdf.png)
-
General information
-
Wellbore history
GeneralWell 9/2-9 S was drilled on the Beta West South structure on the Yme field. The objective of the well was to discover hydrocarbons in sandstones of Middle to Upper Jurassic age (Sandnes and Bryne Formations) in two different fault compartments, to establish the oil-water contact, and to get an exact depth of top Bryne Formation.Operations and resultsThe deviated wildcat well 9/2-9 S was spudded with the semi-submersible installation "Byford Dolphin" on 29 June 1999, and drilled to TD at 4367 m (3386 m TVD RKB) in the Middle Jurassic Bryne Formation. The well was drilled with seawater and hi-vis pills down to 1944.5 m and with "Ultidrill" oil based mud from 1944.5 m to TD. The base oil in the "Ultidrill" mud system consists of olefins. The wellbore was suspended after setting the 9 5/8x 10 3/4" casing. After performing completion on wellbore 9/2-B-3H, drilling continued from 3878 m. Top Bryne Formation was penetrated at 4365 m. Definite oil/water contact was proved in The Midde Jurassic. The discovered hydrocarbon pool was modest however, and it was decided not to drill more wells on the Yme structures. One core was cut in the Sandnes Formation from 3995 m to 4012 m. A FMT oil sample was taken at 3990 m in the Sandnes Formation. A 7" Liner was run the 17 September 1999, and the well was re-classed to 9/2-B-4H and completed as an oil discovery.TestingNo drill stem test was performed. -
Cores at the Norwegian Offshore Directorate
Cores at the Norwegian Offshore Directorate Core sample numberCore sample - top depthCore sample - bottom depthCore sample depth - uom13995.04010.7[m ]Cores at the Norwegian Offshore Directorate Total core sample length [m]15.7Cores at the Norwegian Offshore Directorate Cores available for sampling?YES -
Core photos
-
Lithostratigraphy
Lithostratigraphy Top depth [mMD RKB]Lithostrat. unit1024159409409801005104510501050116015451868190819081953201927102710282335513669384438444365 -
Composite logs
Composite logs Document nameDocument formatDocument size [MB]pdf0.36 -
Documents – reported by the production licence (period for duty of secrecy expired)
Documents – reported by the production licence (period for duty of secrecy expired) Document nameDocument formatDocument size [MB].pdf0.79.pdf14.30 -
Logs
Logs Log typeLog top depth [m]Log bottom depth [m]FMT CHT GR38934326MWD GR RES DEN NEU DIR39954367MWD GR RES DIR PRES38783995MWD GR RT DIR NBI19543878 -
Casing and leak–off tests
Casing and leak–off tests Casing typeCasing diam.
[inch]Casing depth
[m]Hole diam.
[inch]Hole depth
[m]LOT/FIT mud eqv.
[g/cm3]Formation test typeCONDUCTOR30161.036165.00.00LOTINTERM.201062.0261071.00.00LOTINTERM.13 3/81944.017 1/21954.01.60LOTINTERM.9 5/83868.012 1/43878.01.61LOTOPEN HOLE4367.08 1/24367.00.00LOT -
Drilling mud
Drilling mud Depth MD [m]Mud weight [g/cm3]Visc. [mPa.s]Yield point [Pa]Mud typeDate measured3901.03DUMMY10711.03DUMMY12901.03SEAWATER/BENT.14811.03DUMMY16211.03DUMMY17291.03DUMMY19111.03DUMMY19541.03SEAWATER/BENT.22001.56DUMMY27001.5440.0ULTIDRILL34641.6036.0ULTIDRILL35001.6038.0ULTIDRILL38781.3032.0ULTIDRILL39951.2524.0ULTIDRILL40581.2525.0ULTIDRILL43121.2527.0ULTIDRILL43671.2526.0ULTIDRILL -
Pressure plots
Pressure plots The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.Pressure plots Document nameDocument formatDocument size [MB]PDF0.21