Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
11.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6407/8-5 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6407/8-5 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6407/8-5
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    3D survey BPN9501R05 inline 575 & crossline 1780
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    StatoilHydro Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1248-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    25
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    02.05.2009
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    26.05.2009
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    26.05.2011
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    26.05.2011
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    GARN FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    TILJE FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    18.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    252.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3240.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2368.7
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    70.9
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    104
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    GREY BEDS (INFORMAL)
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    64° 20' 56.6'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 33' 44.3'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7136873.69
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    430558.81
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6110

  • Wellbore history
    General
    Well 6407/8-5 S and the sidetrack 6407/8-5 A were drilled on the Gygrid prospect situated 7 km west of the Draugen Field in the Norwegian Sea. The main objectives of the wells were to prove hydrocarbons in the Upper and Lower Åre Formation. A secondary objective was to test the prospectivity of the Late Jurassic Rogn Formation. The structure was expected to be gas filled with a thin oil leg. Total Depth of the wells was planned 100 m TVD under prognosed HC/water contact in the Åre Formation or maximum 2308 m TVD RKB in both S and A wells.
    Operations and results
    Wildcat well 6407/8-5 S was spudded with the semi-submersible installation West Alpha on 2 May 2009 and drilled to TD at 3240 m (2368.7 m TVD) in the Triassic Grey Beds. The well was drilled vertical down to 1375 m, building angle to ca 70 deg at 2170 m, and keeping ca 70 deg from 2170 m to TD. It was drilled with Seawater/WBM down to 926 m and with Versatec oil base mud from 926 m to TD.
    The well penetrated rocks of Quaternary, Tertiary, Cretaceous, Jurassic, and Triassic age. Contrary to the pre-drill interpretation a full Jurassic stratigraphy was encountered, with the Viking Group coming in at 2100 m (1979.2 m TVD), the Fangst Group (Garn Formation) at 2252.5 m (2035.5 m TVD), and the Båt Group at 2487.5 m (2114.5 m TVD). The Spekk and Melke Formation contained several thin sandstones, but no massive Rogn Formation. Instead the Ile Formation at 2346.5 m (2067 m TVD) and the Tilje Formation at 2549 m (2135.3 m TVD) proved to be the main reservoirs, with oil proven in the Tilje Formation. No gas cap was seen. A Tilje ODT was encountered at approximately 2148 m TVD with water up to approximately 2151 m TVD. In addition, a thin gas zone was encountered in a condensed Garn Formation. Weak oil shows were recorded on cuttings from 2152 to 2350 m in the Viking and Fangst Groups, and from 2549 to 2565 m in the Tilje Formation.
    The well penetrated a seismic flat spot that proved to be in the Tilje Formation and not in the Åre Formation as it was prognosed to be. Due to the unexpected geology in the well the hydrocarbon bearing zone was penetrated too far down flank on the structure, missing the prognosed gas cap. The planned down-dip Åre sidetrack was thus re-designed to enter the structure a bit higher than the S well and then to turn upwards to investigate top Tilje in a structurally higher position. No cores were cut in the well. MDT fluid samples were taken in the Tilje Formation at 2551.5 m (oil), at 2583 m (oil) and at 3169 m (water).
    The well was permanently abandoned on 26 May 2009 as an oil discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    930.00
    3240.00

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    2090.0
    [m]
    DC
    PETROSTR
    2100.0
    [m]
    DC
    PETROS
    2110.0
    [m]
    DC
    PETROS
    2120.0
    [m]
    DC
    PETROS
    2130.0
    [m]
    DC
    PETROS
    2150.0
    [m]
    DC
    PETROS
    2160.0
    [m]
    DC
    PETROS
    2170.0
    [m]
    DC
    PETROS
    2180.0
    [m]
    DC
    PETROS
    2190.0
    [m]
    DC
    PETROS
    2200.0
    [m]
    DC
    PETROS
    2220.0
    [m]
    DC
    PETROS
    2240.0
    [m]
    DC
    PETROS
    2260.0
    [m]
    DC
    PETROS
    2280.0
    [m]
    DC
    PETROS
    2300.0
    [m]
    DC
    PETROS

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.42

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MDT GR
    2550
    2848
    MWD LWD - DIR
    270
    334
    MWD LWD - DIR GR RES
    334
    2469
    MWD LWD - DIR GR RES DEN NEU SON
    2469
    3240
    VI VSP
    1920
    2985

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    330.0
    36
    334.0
    0.00
    LOT
    SURF.COND.
    13 3/8
    915.0
    17 1/2
    926.0
    1.80
    LOT
    INTERM.
    9 5/8
    2467.0
    12 1/4
    2469.0
    0.00
    LOT
    OPEN HOLE
    3240.0
    8 1/2
    3240.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    928
    1.47
    23.0
    Versatec
    1070
    1.47
    24.0
    Versatec
    1195
    1.47
    28.0
    Versatec
    1360
    1.47
    27.0
    Versatec
    2420
    1.13
    19.0
    Versatec
    2440
    1.14
    17.0
    Versatec
    2467
    1.47
    31.0
    Versatec
    2541
    1.18
    19.0
    Versatec
    2647
    1.47
    32.0
    Versatec
    2879
    1.10
    15.0
    Versatec
    3100
    1.10
    17.0
    Versatec
    3240
    1.11
    18.0
    Versatec

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.29