Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
11.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

25/11-9

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/11-9
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/11-9
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    218 SP.227
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Esso Exploration and Production Norway A/S
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    266-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    34
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    04.11.1980
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    07.12.1980
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    07.12.1982
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    30.04.2010
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EOCENE
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    INTRA BALDER FM SS
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    PALEOCENE
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    HERMOD FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    126.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    1910.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1910.0
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    57
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    TOR FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    59° 10' 14.02'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 22' 30.84'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6559363.15
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    464281.94
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    213
  • Wellbore history

    General
    Well 25/11-9 was drilled ca km west-south west of the 25/11-1 Balder discovery well on the Utsira High in the North Sea. The objective was to establish the presence of a thick accumulation of oil sand in the southern part of the Balder Field, and to confirm the reservoir quality of Lobe 8 penetrated in the 25/11-5 well. The top of the reservoir was anticipated to be at 1688 m subsea.
    Operations and results
    Appraisal well 25/11-9 was spudded with the semi-submersible installation Norskald on 4 November 1980 and drilled to TD at 1910 m in the Late Cretaceous Tor Formation. The well was drilled with Seawater/Gel/Lignosulphonate.
    The well penetrated the Utsira Formation and several Skade Formation sands and then penetrated a ca 560 m thick section of shale/mudstone/siltstone belonging to the lower Hordaland Group before top Balder Formation was encountered at 1670 m. Drilling revealed two oil sand zones, one of Eocene age between 1708.5 m and 1742 m (Intra Balder Formation sand), the second of Paleocene age (Hermod Formation) between 1781 m and 1785 m, which is the Balder Field oil-water contact. A few thin sands in the upper Balder Formation from 1671 m to1694 m also appeared to be oil bearing. A second Hermod Formation from 1789 to 1818 m was water wet with some weak shows.
    Four conventional cores were attempted in the interval 1718 to 1744 m in the Intra Balder Formation Sandstone, but only 3.5 m from the first and 1.5 m from the last core was retrieved. No wire line fluid samples were taken.
    The well was permanently abandoned on 7 December 1980 as an oil appraisal well.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    220.00
    1910.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1718.0
    1721.5
    [m ]
    4
    1734.0
    1735.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    4.5
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Palynological slides at the Norwegian Offshore Directorate

    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1250.0
    [m]
    SWC
    1300.0
    [m]
    SWC
    1310.0
    [m]
    SWC
    1320.0
    [m]
    SWC
    1378.0
    [m]
    SWC
    1405.0
    [m]
    SWC
    1450.0
    [m]
    SWC
    1500.0
    [m]
    SWC
    1557.0
    [m]
    SWC
    1600.0
    [m]
    SWC
    1630.0
    [m]
    SWC
    1649.0
    [m]
    DC
    1661.0
    [m]
    DC
    1673.0
    [m]
    DC
    1679.0
    [m]
    DC
    1690.0
    [m]
    SWC
    1695.0
    [m]
    SWC
    1705.0
    [m]
    SWC
    1712.0
    [m]
    SWC
    1718.0
    [m]
    SWC
    1723.0
    [m]
    SWC
    1725.0
    [m]
    SWC
    1728.0
    [m]
    SWC
    1730.0
    [m]
    SWC
    1733.0
    [m]
    SWC
    1743.0
    [m]
    SWC
    1748.0
    [m]
    SWC
    1752.0
    [m]
    SWC
    1755.0
    [m]
    SWC
    1760.0
    [m]
    SWC
    1765.0
    [m]
    SWC
    1770.0
    [m]
    SWC
    1772.0
    [m]
    DC
    1778.0
    [m]
    DC
    1782.0
    [m]
    SWC
    1784.0
    [m]
    DC
    1787.0
    [m]
    SWC
    1790.0
    [m]
    SWC
    1790.0
    [m]
    DC
    1805.0
    [m]
    SWC
    1820.0
    [m]
    SWC
    1820.0
    [m]
    DC
    1825.0
    [m]
    SWC
    1826.0
    [m]
    DC
    1832.0
    [m]
    DC
    1835.0
    [m]
    SWC
    1838.0
    [m]
    DC
    1841.0
    [m]
    DC
    1845.0
    [m]
    SWC
    1847.0
    [m]
    DC
    1853.0
    [m]
    DC
    1855.0
    [m]
    SWC
    1859.0
    [m]
    DC
    1865.0
    [m]
    SWC
    1865.0
    [m]
    DC
    1870.0
    [m]
    DC
    1875.0
    [m]
    SWC
    1877.0
    [m]
    DC
    1885.0
    [m]
    SWC
    1889.0
    [m]
    DC
    1889.0
    [m]
    DC
    1895.0
    [m]
    SWC
    1901.0
    [m]
    DC
    1910.0
    [m]
    DC
  • Lithostratigraphy

  • Documents – reported by the production licence (period for duty of secrecy expired)

    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    1.40
    pdf
    3.91
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CDL CNL GR
    1185
    1909
    DIPLOG
    1208
    1909
    DLL MLL GR
    1192
    1909
    IEL BHC AC SP GR
    150
    1908
    SWC
    1250
    1895
    SWC
    1718
    1790
    VELOCITY
    150
    1909
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    213.5
    0.0
    0.00
    INTERM.
    13 3/8
    482.3
    0.0
    0.00
    INTERM.
    9 5/8
    1207.5
    0.0
    0.00
    OPEN HOLE
    1910.0
    8 1/2
    1910.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    145
    1.04
    waterbased
    300
    1.05
    waterbased
    473
    1.08
    waterbased
    820
    1.11
    46.0
    waterbased
    1200
    1.09
    waterbased
    1693
    1.11
    66.0
    waterbased