Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
11.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

2/1-5

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/1-5
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/1-5
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    BP 019 - 80 - 61A SP 1367
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    BP Norway Limited U.A.
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    353-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    144
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    13.11.1982
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    05.04.1983
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    05.04.1985
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    12.03.2011
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    ULA FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    24.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    66.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4454.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4454.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    9
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    157
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIDDLE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BRYNE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 47' 54.06'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 12' 21.39'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6295099.08
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    512578.71
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    63

  • Wellbore history
    General
    Well 2/1-5 was drilled on the Cod Terrace of the Central Graben in the southern North Sea. The primary objective was test a Late Jurassic sandstone prospect on the south side of a large, central salt culmination in block 2/1. The prospect was developed by analogy with the 2/1-3 oil discovery (Gyda) on the north-western slope of the same salt high. There, the reservoir is a 60 to 90 m thick sand within the Farsund formation, with closure formed primarily by pinch out/truncation beneath the Mandal Formation on lapping on the central salt high. Secondary objectives were possible deeper reservoirs such as the Ula and Bryne Formations and the Triassic down to top salt.
    Operations and results
    Wildcat well 2/1-5 was spudded with the semi-submersible installation Sedco 707 on 13 November 1982 and drilled to TD at 4454 m. In the Cretaceous sequence the string got stuck and the well had to be sidetracked from 2882 m. After a drilling break at 4186 m an oil kick occurred with 21.5 m influx and oil appearing in the mud. RFT measurements in sandstone units below the oil kick showed pore pressures on a gradient equivalent to a mud weight of 2.10 g/cm. This gave little margin for safe onward drilling to Top Salt and the well was terminated in dark, carbonaceous mudstone of uncertain, possibly Early Jurassic age. The well was drilled with seawater/gel down to 635 m, with gypsum/lignosulfonate mud from 635 m to 3830 m, and with Lignosulphonate/lignite mud from 3830 m to TD.
    Well 2/1-5 reached the Base Cretaceous Unconformity and the "Hot shale" at 3882 m as predicted. Coring was initiated when traces of sand were observed near the predicted "top reservoir", but only dark, carbonaceous mudstone/siltstone was recovered. In total, 300 metres of mudstone/siltstone were then drilled without any clear trace of the expected equivalent of the 2/1-3 reservoir sandstone. Then, at 4193 m a porous, highly over pressured sandstone unit was penetrated, causing an oil kick and creating new hope for the prospect. However, the thickness of this oil sand was only 6 m, rendering it uneconomic as a single productive reservoir zone. The sand is classified as Ula formation. Several thin bands of sandstones occur within the mudstone sequence below the "kick sand", but these were all well cemented and thus unproductive. Oil shows were seen in sidewall cores in these bands of cemented sandstone down to as deep as 4300 m.
    One core was cut from 3929.0 to 3946.3 m in the Farsund Formation. The RFT tool was run on wire line for pressure sampling, but no fluid samples were taken.
    The well was permanently abandoned on 5 April 1983 as a minor oil discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    180.00
    4454.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3928.9
    3947.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    18.4
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 3928-3934m
    Core photo at depth: 3935-3941m
    Core photo at depth: 3942-3947m
    Core photo at depth:  
    Core photo at depth:  
    3928-3934m
    3935-3941m
    3942-3947m

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    4202.0
    [m]
    DC
    SAGA
    4226.0
    [m]
    DC
    SAGA
    4253.0
    [m]
    DC
    SAGA
    4280.0
    [m]
    DC
    SAGA
    4316.0
    [m]
    DC
    SAGA
    4337.0
    [m]
    DC
    SAGA
    4370.0
    [m]
    DC
    SAGA
    4391.0
    [m]
    DC
    SAGA
    4415.0
    [m]
    DC
    SAGA
    4439.0
    [m]
    DC
    SAGA
    4454.0
    [m]
    DC
    SAGA

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.77

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.20

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    17.09

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL VDL
    550
    800
    CBL VDL
    1750
    2050
    CST GR
    3900
    4100
    CST GR
    4090
    4300
    CST GR
    4130
    4210
    CST GR
    4210
    4458
    DLL MSFL GR SP CAL
    4150
    4453
    HDT
    3821
    4217
    HDT
    3821
    4180
    HDT
    3821
    4458
    ISF BHC GR SP
    162
    635
    ISF BHC GR SP
    3830
    4217
    ISF BHC MSFL GR SP CAL
    626
    3830
    ISF BHC MSFL GR SP CAL
    4218
    4457
    LDL CNL NGS GR CAL
    3821
    4457
    RFT GR
    4194
    4374
    RFT GR
    4195
    4214
    RFT GR
    4200
    4200

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    161.0
    36
    167.0
    0.00
    LOT
    SURF.COND.
    18 5/8
    625.0
    24
    635.0
    1.58
    LOT
    INTERM.
    13 3/8
    2001.0
    17 1/2
    2008.0
    1.86
    LOT
    INTERM.
    9 5/8
    3817.0
    12 1/4
    3830.0
    2.13
    LOT
    OPEN HOLE
    4454.0
    8 3/8
    4454.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    650
    1.20
    35.0
    WATERBASED
    1010
    1.28
    45.0
    WATERBASED
    1380
    1.45
    72.0
    WATERBASED
    2030
    1.51
    56.0
    WATERBASED
    2940
    1.68
    54.0
    WATERBASED
    4450
    2.13
    67.0
    WATERBASED

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    PDF
    0.21