Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

15/3-2 R

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/3-2 R
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/3-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    line 580529-SP 210
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Elf Petroleum Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    168-L2
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    125
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    26.07.1977
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    27.11.1977
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    27.11.1977
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    27.11.1979
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    06.10.2010
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    YES
    Reentry activity
    Reason for reentry of the wellbore. Only relevant for exploration wellbores. Example of legal values: DRILLING, DRILLING/PLUGGING, LOGGING, PLUGGING, TESTING, TESTING/PLUGGING.
    DRILLING
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    SHOWS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    110.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4990.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4990.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3.3
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    154
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIDDLE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    HEATHER FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 59' 0.5'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    1° 47' 12.6'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6538995.08
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    430266.34
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    311

  • Wellbore history
    General
    Well 15/3-2 R is a re-entry of well 15/3-2 in the Vilje sub-basin structural element of the south Viking Graben of the North Sea. The primary well 15/3-2 was drilled by "Polyglomar Driller", which was equipped with 10.000 psi WP 18 3/4" BOP-stack. This well was suspended on 24 January 1977 with 9 5/8" casing set at 4248 m, in the Late Jurassic Draupne Formation. The re-entry was drilled with the Pentagone 84, equipped with a 15000 psi WPI 11" BOP stack, necessary to drill and test high-pressure Jurassic reservoirs. The objective of well 15/3-2 R was to test the Jurassic reservoirs, including the Dogger - Lias sections.
    Operations and results
    Well 15/3-2 was re-entered with the semi-submersible installation Pentagone 84 on 26 July 1977 after some initial problem with connecting to the wellhead on the sea floor. An 8 11/32" hole was drilled down to 4990 m when the drill string parted. In spite of an extensive fishing operation, the fish had to be left in hole. Top fish is at 4742 m. A sidetracking operation was performed trying to bypass the fish, but also this operation failed and 4990 became TD of the well. The well was drilled water based with LFC-LC mud from re-entry point to TD.
    The Draupne Formation extended from 4236 m down to 4352 m, making up a total of 116 m. Geochemical analyses proved TOC from 3 to 7 %wt and vitrinite reflectance analyses indicated middle oil window maturity (%Ro = 0.75). Four Intra Heather Formation sandstone reservoirs were drilled in the Jurassic section, varying in gross thickness from 15 to 112 m. According to logs the two upper ones, 112 and 64 m thick, were hydrocarbon-bearing, but with bad characteristics (porosity destruction by silicification) and no tests were successful. Shows during drilling were recorded throughout the Jurassic: low levels of C1 to C4 gas in mud, and fluorescence (direct and cut) on cuttings and cores. Gas was observed bubbling and seeping from all the cores. Because of the premature stop the Brent to Statfjord (Dogger to Early Jurassic) sedimentary section was not reached. As no electric logs were run below 4742 m the lithostratigraphy is poorly defined in the bottom part of the well. However, it is likely that TD was set in Heather Formation shale, and it is possible that the Dogger section (Brent Group) is very close to the TD (J4 horizon was prognosed at 5000/5100 m).
    Four cores were cut in the intra Heather Formation Sandstones: cores 1 and 2 from 4404 to 4409 m, core 3 from 4565 to 4574 m, and core 4 from 4656 to 4662 m. 26 RFTs were attempted in the three upper sandstone bodies. All were either dry or they failed. Only two RFTs, at 4401 and 4401.4 m, were stabilized and indicated an equivalent density of 1.73. The well was permanently abandoned on 27 November 1977 as a well with strong shows.
    Testing
    A 7" liner was set from 4101 m to 4665 m. Three DST-runs were carried out, all misruns due to mechanical failure of the PCT-tool.

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    4402.0
    4403.8
    [m ]
    2
    4406.0
    4407.8
    [m ]
    3
    4565.0
    4575.0
    [m ]
    4
    4656.0
    4662.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    19.5
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: High: 4402-4407m
    Core photo at depth: Low: 4402-4407m
    Core photo at depth: High: 4565-4569m
    Core photo at depth: Low: 4565-4569m
    Core photo at depth: High: 4569-4573m
    High: 4402-4407m
    Low: 4402-4407m
    High: 4565-4569m
    Low: 4565-4569m
    High: 4569-4573m
    Core photo at depth: Low: 4569-4573m
    Core photo at depth: High: 4573-4658m
    Core photo at depth: Low: 4573-4658m
    Core photo at depth: High: 4658-4662m
    Core photo at depth: Low: 4658-4662m
    Low: 4569-4573m
    High: 4573-4658m
    Low: 4573-4658m
    High: 4658-4662m
    Low: 4658-4662m

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    4402.5
    [m]
    C
    RRI
    4407.5
    [m]
    C
    RRI
    4450.0
    [m]
    DC
    RRI
    4455.0
    [m]
    DC
    RRI
    4460.0
    [m]
    DC
    RRI
    4465.0
    [m]
    DC
    RRI
    4512.0
    [m]
    DC
    RRI
    4516.0
    [m]
    DC
    RRI
    4520.0
    [m]
    DC
    RRI
    4524.0
    [m]
    DC
    RRI
    4532.0
    [m]
    DC
    RRI
    4540.0
    [m]
    DC
    RRI
    4548.0
    [m]
    DC
    RRI
    4565.0
    [m]
    C
    RRI
    4568.0
    [m]
    C
    RRI
    4570.7
    [m]
    C
    RRI
    4616.0
    [m]
    DC
    RRI
    4626.0
    [m]
    DC
    RRI
    4638.0
    [m]
    DC
    RRI
    4648.0
    [m]
    DC
    RRI
    4656.8
    [m]
    C
    RRI
    4660.0
    [m]
    C
    RRI
    4662.0
    [m]
    C
    RRI

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.74

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.27
    pdf
    0.11
    pdf
    12.71

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    LINER
    7
    4665.0
    8 1/2
    4990.0
    0.00
    LOT

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.21