Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
27.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/1-9

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-9
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-9
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ST06M02:inline 940 & crossline 1027
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Noil Energy ASA
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1169-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    64
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    19.02.2008
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    22.04.2008
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    22.04.2010
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    22.04.2010
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    SLEIPNER FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    LATE TRIASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    SKAGERRAK FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    112.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2544.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2536.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    10
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    91
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SKAGERRAK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 54' 48.04'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 12' 7.25'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6530827.42
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    454037.12
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    5773

  • Wellbore history
    General
    The 16/1-9 Draupne prospect is located on the eastern margin of the South Viking Graben in the North Sea. The structure is situated in the eastern part of the Gudrun Terrace and the western flank of the Utsira High. The primary target was a faulted anticline trap within Hugin/Sleipner reservoir sandstones of Middle Jurassic Bajocian - Callovian age. A secondary target was mapped on a four way dip closure within the Paleocene top Heimdal level, the Gugne prospect. Well 16/1-9 was planned as a vertical well with TD ca 50 m into the Hugin/Sleipner Formation if water bearing, or ca 50 m into the Triassic Skagerrak Formation in case of a discovery.
    Operations and results
    Wildcat well 16/1-9 was spudded with the semi-submersible installation Bredford Dolphin on 19 February 2008 and drilled to TD at 2544 m in the Late Triassic Skagerrak Formation. A pilot hole was drilled prior to the 36" section. No signs of shallow gas were observed or seen on MWD logs. Significant downtime resulted from a shallow water flow beside the well (5.2 days), wait on weather (4.3 days), BOP acoustic failure (3.5 days), poor hole conditions (2.9 days) and stuck wire line (2.2 days). The well was drilled with Seawater and sweeps down to 600 m, with KCl/GEM mud from 600 m to 1281 m, and with Performadril mud from 1281 m to TD.
    The secondary target Heimdal Formation was entered at 2126.0 m (2123.2 m TVD), approximately 100 meters deeper than the prognosed depth, and it was dry. The Sleipner Formation sandstone was encountered at 2399.0 m (2393.2 m TVD), 167 TVD meters deeper than prognosed. The Skagerrak Formation was encountered at 2411 m (2405 m TVD), 23 TVD meters shallower than prognosed. The wire line logs proved a thin gas cap from 2399 m (2368 m TVD MSL) to about 2407.5 m (2376.5 m TVD MSL), oil down to 2442.5 m (2411 m TVD MSL) and oil shows on cuttings down to 2448 m. There was no indication of an oil-water contact from the logs. The reservoir quality is variable with good reservoir sands disrupted by shale layers and cemented zones (carbonate nodules/clasts).
    Apart from shows in the Sleipner and Skagerrak formations reservoir zone oil shows were observed also in thin Hordaland Group sandstones from 1510 to 1540 meters.
    One core was cut at 2417.5 to 2426.9 m in the Skagerrak Formation with 100% recovery. The MDT tool was run on wire line. One gas and one oil sample were taken at 2405.0 and 2419.5 m respectively. During the MDT run the wire line cable got stuck and further wire line operations were terminated.
    The well was permanently abandoned on 22 April 2008 as an oil discovery
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    610.00
    2544.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2417.5
    2426.8
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    9.3
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    2409.0
    [m]
    DC
    APT
    2412.0
    [m]
    DC
    APT
    2415.0
    [m]
    DC
    APT
    2418.0
    [m]
    DC
    APT
    2421.0
    [m]
    DC
    APT

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.46

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.19
    pdf
    3.79

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MDT
    2399
    2445
    MWD - GR EWR
    136
    600
    MWD - GR EWR
    600
    1281
    MWD - GR EWR PWD ALD CTN BAT
    1281
    2544
    PEX HRLA MSIP
    318
    2532
    VSI
    458
    2530

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    200
    1.03
    Spudmud
    235
    1.04
    Spudmud
    487
    1.03
    Spudmud
    567
    1.03
    Spudmud
    600
    1.12
    10.0
    KCL/Glycol/Polymer
    600
    1.04
    Spudmud
    624
    1.12
    12.0
    KCl/GEM/Polymer
    813
    1.14
    18.0
    KCl/GEM/Polymer
    1130
    1.35
    30.0
    PERFORMADRIL
    1223
    1.15
    21.0
    KCl/GEM/Polymer
    1231
    1.36
    34.0
    PERFORMADRIL
    1250
    1.35
    34.0
    PERFORMADRIL
    1281
    1.20
    22.0
    KCl/GEM/Polymer
    1281
    1.24
    24.0
    KCl/GEM/Polymer
    1284
    1.21
    24.0
    KCl/GEM/Polymer
    1339
    1.22
    24.0
    PERFORMADRIL
    1476
    1.22
    24.0
    PERFORMADRIL
    1597
    1.22
    25.0
    PERFORMADRIL
    1713
    1.23
    24.0
    PERFORMADRIL
    1835
    1.27
    30.0
    PERFORMADRIL
    1897
    1.35
    32.0
    PERFORMADRIL
    1971
    1.35
    32.0
    PERFORMADRIL
    2039
    1.35
    33.0
    PERFORMADRIL
    2130
    1.35
    32.0
    PERFORMADRIL
    2206
    1.35
    35.0
    PERFORMADRIL
    2234
    1.35
    33.0
    PERFORMADRIL
    2249
    1.35
    33.0
    PERFORMADRIL
    2275
    1.35
    35.0
    PERFORMADRIL
    2300
    1.35
    35.0
    PERFORMADRIL
    2341
    1.35
    34.0
    PERFORMADRIL
    2402
    1.35
    37.0
    PERFORMADRIL
    2417
    1.35
    34.0
    PERFORMADRIL
    2418
    1.35
    36.0
    PERFORMADRIL
    2485
    1.35
    40.0
    PERFORMADRIL
    2544
    1.35
    35.0
    PERFORMATROL

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.23