Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
27.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

30/11-7

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/11-7
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/11-7
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    3D survey NH0609-inline 4240 & xline 2087
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    StatoilHydro Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1195-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    84
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    12.11.2008
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    03.02.2009
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    03.02.2011
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    03.02.2011
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS/CONDENSATE
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    NESS FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    18.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    111.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4067.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4067.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.5
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    139
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    DRAKE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 0' 21.24'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 22' 25.62'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6652389.10
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    465075.91
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    5919

  • Wellbore history
    General
    Well 30/11-7 was drilled on the eastern flank of the Central Viking Graben, NE of the Frigg Field in the North Sea. The main objectives were to prove gas condensate in the Fulla structure, establish the gas/water contact in the reservoir, and verify Brent Group reservoir quality. Further objectives were to verify reservoir pressure conditions and vertical communication in reservoir. The TD of the well was planned 50 m into the Drake Formation, or to 4068 m TVD RKB.
    Operations and results
    Wildcat well 30/11-7 was spudded with the semi-submersible installation West Alpha on 12 November 2008 and drilled to TD at 4067 m in the Early Jurassic Drake Formation. No shallow gas was observed by the ROV or on the MWD while drilling the 36" or the 26" holes. Boulders gave slow penetration and heavy vibration between 250 to 300 m. In the 17 1/2" section from 1334 to 3014 m hard rocks, carbonate stringers and cemented sandstone stringers caused slow penetration and numerous bit changes. Intermediate wire line logging was performed at 2910 m while a leak in the top drive DDM was repaired. In the wire line logging at final TD the MDT tool got stuck and was left in the hole. The well was drilled with seawater and spud mud down to 1331 m and with Versatec oil based mud from 1331 m to TD.
    The 30/11-7 well penetrated rocks of Quaternary, Tertiary, Cretaceous and Jurassic age. A 12 m thick Draupne Formation shale was encountered at 3722 m overlying a 219 m thick Heather Formation. The main prognosed reservoir sandstones of the Tarbert Formation were not encountered in the well. Top Brent Group, Ness Formation, was encountered at 3953 m. The well proved a lean gas-condensate in sandstones of the Ness Formation. The Gas-Water Contact is estimated to be at 3992 m, based on pressure results. Poor oil shows were observed on Early Cretaceous limestone cuttings from 3450 m to 3657 m. Good oil shows were observed in the middle part of the core from the Ness Formation.
    One core was cut at 3983.0 to 3998.1 m in the Ness Formation. Water was sampled from the Etive Formation at 4008 m, and gas was sampled from the Ness Formation at 3985 m, and at 3986 m. The single probe (PS) was used for sampling water and the Quicksilver probe (PQ) were used for sampling gas. A mini DST by MDT dual packer MDT was performed at 3981.2 m in the Ness Formation, but the samples from this test was lost as the tool string got stuck and was left in the hole.
    The well was permanently plugged back to the 14" casing, just above the 9 5/8" hanger and abandoned. A sidetrack was planned to be drilled by Transocean Leader.
    The well was suspended on 3 February 2009 as a gas/condensate discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1340.00
    4067.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3983.0
    3998.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    15.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    3951.0
    [m]
    DC
    CGG
    3960.0
    [m]
    DC
    CGG
    3969.0
    [m]
    DC
    CGG
    3978.0
    [m]
    DC
    CGG
    3983.0
    [m]
    DC
    CGG

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    AIT MSIP PEX GR
    2996
    3657
    AIT OBMI GR
    3656
    4065
    CMR ECS HNGS GR
    3945
    4001
    DSI GR
    1313
    2885
    MDT GR
    3957
    4021
    MDT GR
    3981
    3981
    MDT GR
    3985
    3985
    MDT GR
    3985
    3600
    MSIP PEX GR
    3200
    4046
    MWD LWD - GR RES DIR PWD
    129
    3660
    MWD LWD - GR RES DIR PWD FPWD
    3660
    4067
    PEX GR
    1313
    2888
    WA-ZO VSP
    1420
    4045

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    188.0
    36
    192.0
    0.00
    LOT
    SURF.COND.
    20
    1316.0
    26
    1331.0
    1.65
    LOT
    INTERM.
    14
    2999.0
    17 1/2
    3014.0
    1.92
    LOT
    INTERM.
    9 5/8
    3658.0
    12 1/4
    3660.0
    2.01
    LOT
    OPEN HOLE
    4067.0
    8 1/2
    4067.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1334
    1.39
    22.0
    Versatec
    2881
    1.95
    63.0
    Versatec
    2909
    1.48
    27.0
    Versatec
    3014
    1.48
    28.0
    Versatec
    3014
    1.48
    28.0
    Versatec
    3117
    1.76
    36.0
    Versatec
    3658
    1.85
    44.0
    Versatec
    3661
    1.85
    46.0
    Versatec
    3765
    1.92
    56.0
    Versatec
    3983
    1.95
    57.0
    Versatec
    4024
    1.95
    56.0
    Versatec
    4053
    1.95
    56.0
    Versatec
    4067
    1.95
    57.0
    Versatec
    4067
    1.95
    56.0
    Versatec