Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/1-11

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-11
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-11
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    inline 886 & crossline 1149
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Det norske oljeselskap ASA
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1261-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    63
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    23.02.2010
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    26.04.2010
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    26.04.2012
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    26.04.2012
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    SLEIPNER FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    LATE TRIASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    SKAGERRAK FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    29.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    112.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2625.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2625.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    1.4
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    105
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SKAGERRAK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 55' 36.15'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 11' 7.48'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6532327.00
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    453098.97
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6157

  • Wellbore history
    General
    Well 16/1-11 was drilled to appraise the 16/1-9 discovery on the Gudrun Terrace just west of the Utsira High in the North Sea. The discovery well 16/1-9 was completed in April 2008 and revealed oil shows in the Middle Jurassic Vestland Group, but neither coring or logging was completed according to programme due to hole problems. The extent and reservoir quality of the Sleipner Formation in the Vestland Group was a primary objective in the data acquisition programme for 16/1-11 and an extensive wire line logging suite was planned in order to get as much information as possible regarding the oil-water contact, depth conversion, reservoir thickness, facies, fluids, well productivity and possible barriers in the reservoir. The Sleipner Formation reservoir was prognosed to be 75 m thick and coring of the hydrocarbon bearing part of the reservoir was decided prior drilling. Planned TD was TD at 2579 m, approximately 100 metres below prognosed base of the Sleipner Formation.
    Operations and results
    Well 16/1-11 was spudded with the semi-submersible installation Songa Delta on 23 February 2010. The 8 1/2" section in was drilled to TD at 2625 m in the Skagerrak Formation. After logging problems with setting and cementing the 7" liner made it necessary to make a sidetrack, 16/1-11T2, in order to do a drill stem test. The 8 1/2" sidetrack was kicked off from 2193 m and drilled to 2532 m (2523 m TVD). The sidetrack was drilled deviated with up to 20 deg deviation at its TD. The well was drilled with seawater down to 603.5 m, with Aqua-drill mud with 6% glycol from 603.5 to 1770 m, and with Carbo-Sea oil based mud from 1770 m to TD.
    Hydrocarbons were proven in the Sleipner and Skagerrak formations. Top Sleipner Formation came in at 2380.5 m. It consisted of 20 m coarse fining upward sandstones and contained gas. Analysis of core and log data showed good reservoir quality with calculated average effective porosity of about 19% and an average gas saturation of 31%. The Net Pay/Gross was nearly 1.0. The Skagerrak Formation came in at 2400.5 m. The core and log analysis proved a much lower reservoir quality than in the Sleipner Formation, mainly due to carbonate cementation. No contacts could be interpreted from the logs but pressure data gave a gas/oil contact at 2377.8 m TVD MSL. The log and pressure evaluation showed oil down to 2438 m (2409 m TVD MSL) and water up to 2445 m (2416 TVD MSL) in the Skagerrak formation. There were no pressure barriers between the Sleipner and Skagerrak formations. The deepest oil staining and fluorescence was recorded at 2502.8 m.
    Five 90 ft cores were cut in the interval 2385.5 m to 2522 m with practically 100 % recovery. Fluid samples were taken with the RCI tool. Gas samples were taken at 2396 m and 2406 m while oil samples were taken at 2408.8 m and 2437.8. A water sample was taken at 2454.1 m.
    The well was plugged back for a geological sidetrack on 26 April as an oil and gas appraisal well.
    Testing
    One DST was performed in the sidetrack. It was perforated from 2415 - 2425 m, underbalanced with TCP. It flowed 177 Sm3 oil /day through a 28/64" choke. The oil density was 0.835 g/cm3 and GOR was 127 Sm3/Sm. Initial formation pressure was 244.75 bar at reference depth 2377.8 m TVD MSL. Initial formation temperature at this depth (DST temperature) was 98 deg C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    610.00
    2625.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2385.5
    2411.9
    [m ]
    2
    2412.5
    2439.1
    [m ]
    3
    2439.5
    2466.6
    [m ]
    4
    2466.5
    2494.4
    [m ]
    5
    2494.1
    2522.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    135.9
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    2445.00
    2415.00
    OIL
    16.04.2010 - 00:00
    YES

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    txt
    0.00
    txt
    0.01

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    0
    0
    24.0
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    98
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    525

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MARCH JAR TTRM GR RCI SAM
    2396
    2437
    MRCH GYRO
    2173
    2174
    MRCH GYRO
    2202
    2204
    MRCH JAR TTR GR SBT
    2356
    2625
    MRCH JAR TTR MREX ZDL CN
    2325
    2625
    MRCH JAR TTRM DSL ZDL CN
    2356
    2521
    MRCH JAR TTRM GR JRC GUNS
    0
    0
    MRCH JAR TTRM GR JRC GUNS
    0
    0
    MRCH JAR TTRM GR PERF
    2383
    2489
    MRCH JAR TTRM GR SBT
    2218
    2489
    MRCH JAR TTRM GR SBT
    2356
    2625
    MRCH JAR TTRM GR SPOP
    2405
    2454
    MRCH JAR TTRM GR XMAC C-STAR
    1760
    2610
    MRCH JAR TTRM GR ZVSP
    585
    2615
    MWD LWD - BR GR REMP BHPR MECH
    2361
    2625
    MWD LWD - GR REMP BHPR MECH
    196
    2361

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    196.5
    36
    165.5
    0.00
    LOT
    SURF.COND.
    20
    600.0
    26
    603.0
    0.00
    LOT
    INTERM.
    13 3/8
    1764.5
    17 1/2
    1770.0
    1.78
    LOT
    INTERM.
    9 5/8
    2356.0
    12 1/4
    2361.0
    0.00
    LOT
    LINER
    7
    2530.0
    8 1/2
    2532.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    202
    1.04
    SPUD MUD
    1753
    1.30
    33.0
    CARBO TECH
    1770
    1.31
    16.0
    AQUACOL KCL/POLYMER/GLYCOL
    2150
    1.24
    21.0
    CARBO TECH
    2167
    1.30
    29.0
    CARBO TECH
    2202
    1.24
    31.0
    CARBO TECH
    2361
    1.30
    18.0
    CARBO TECH
    2473
    1.24
    26.0
    CARBO TECH
    2625
    1.21
    21.0
    CARBO TECH

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.23