Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
25.12.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6507/2-4

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/2-4
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/2-4
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Survey ST9717RO4-inline3894 & Trace 3766
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Eni Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1163-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    95
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    17.11.2007
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    19.02.2008
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    19.02.2010
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    19.02.2010
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS/CONDENSATE
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    LYSING FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    18.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    365.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3600.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3600.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    126
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LYR FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    65° 56' 27.42'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 35' 38.18'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7314229.99
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    436037.20
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    5685

  • Wellbore history
    General
    Well 6507/2-4 was drilled on the Marulk structure on the Dønna Terrace in the Norwegian Sea. The main purpose was to appraise the Lysing Formation discovery in the previous well 6507/2-2, and to confirm the reserves down flank. Lange Formation (Intra Lange sandstones UL2 and UL1) was the secondary target. Planned TD was set 50 m into the Jurassic.
    Operations and results
    Appraisal well 6507/2-4 was spudded with the semi-submersible installation West Alpha on 17 November 2007 and drilled to TD at 3600 m in the Early Cretaceous Lyr Formation. Operations proceeded without really serious problems, but in the 12 1/4" and 8 1/2" sections a considerable amount of time was NPT due bad weather conditions and hole instability with tendency of stuck BHA. Due to very low rate of penetration it was agreed among the License Partners to set TD in the Cretaceous Lyr Formation. The well was drilled with sea water and hi-vis sweeps down to 1350 m and with Ultradril mud from 1350 m to TD.
    All stratigraphic tops were encountered generally 10-27 meters higher than expected; Lysing formation was found 10.4 m higher than prognosed, UL2 sandstone 14.5 m deepest and UL1sandstone was hit 19 m higher. The primary target Lysing sandstone was found at 2832 m and was found Gas/Condensate bearing all through down to a GDT at 2853 m. Unit UL2 was found water bearing at 3331.5 m, composed by many sand layers interbedded with claystone. Unit UL1 was found at oil bearing at 3378.5 m, consisting in one sand body 3 meters thick. Oil shows and gas peaks were recorded in numerous thin sandstone stringers in the Lange Formation between 3320 m and 3465 m.
    One core was cut from 2835 to 2852 m in the Lysing Formation, and two cores were cut in the interval 3334 to 3344.8 m in the Lange Formation. MDT gas/condensate samples were taken at 2838 m and 2850 m in the Lysing Formation, water was sampled in the intra-Lange Formation UL2 level at 3337 m, and oil in the intra-Lange Formation UL1 level at 3380.5 m.
    The well was permanently abandoned on 19 February 2008 as a gas/condensate appraisal well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1360.00
    3600.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2835.0
    2852.0
    [m ]
    2
    3334.0
    3342.3
    [m ]
    3
    3342.3
    3344.8
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    27.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    0.00
    0.00
    YES

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR XPT GR
    3291
    3600
    CMR XPT GR ACTS
    2755
    2971
    FMI MSIP GR PPC ACTS
    2247
    3071
    MDT MINI DST
    2838
    2850
    MDT MINI DST
    3337
    3380
    MSCT
    3296
    3480
    MSIP FMI GR
    1200
    3597
    MWD - ARCGR ARCRES DIR
    1310
    2260
    MWD - ARCGR ARCRES DIR SON
    447
    1310
    MWD - GR
    383
    447
    MWD - RAB GR RES BIT RES GDIR EC
    3074
    3600
    MWD - RAB GR RES BIT RES GEODIR
    2260
    3074
    PEX ECS HRLA GR
    2247
    3074
    PEX ECS HRLA GR ACTS
    2819
    3584
    VSP
    1440
    3550

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    443.0
    36
    445.0
    0.00
    LOT
    SURF.COND.
    20
    1343.0
    26
    1355.0
    1.73
    LOT
    INTERM.
    13 3/8
    2247.0
    17 1/2
    2263.0
    1.85
    LOT
    INTERM.
    9 5/8
    3065.0
    12 1/4
    3080.0
    1.93
    LOT
    OPEN HOLE
    3600.0
    8 1/2
    3600.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    446
    1.30
    SPUD MUD
    518
    1.05
    SPUD MUD
    547
    1.05
    SPUD MUD
    1089
    1.05
    SPUD MUD
    1350
    1.30
    120.0
    SPUD MUD
    1400
    1.25
    15.0
    ULTRADRIL DW
    2070
    1.55
    35.0
    ULTRADRIL DW
    2260
    1.55
    31.0
    ULTRADRIL DW
    2591
    1.48
    29.0
    ULTRADRIL DW
    2722
    1.48
    30.0
    ULTRADRIL DW
    2756
    1.48
    28.0
    ULTRADRIL DW
    2772
    1.48
    27.0
    ULTRADRIL DW
    2834
    1.48
    310.0
    ULTRADRIL DW
    2954
    1.48
    31.0
    ULTRADRIL DW
    3051
    1.49
    33.0
    ULTRADRIL DW
    3074
    1.49
    29.0
    ULTRADRIL DW
    3084
    1.52
    32.0
    ULTRADRIL DW
    3170
    1.56
    32.0
    ULTRADRIL DW
    3225
    1.62
    38.0
    ULTRADRIL DW
    3237
    1.63
    37.0
    ULTRADRIL DW
    3257
    1.66
    37.0
    ULTRADRIL DW
    3286
    1.67
    33.0
    ULTRADRIL DW
    3334
    1.73
    41.0
    ULTRADRIL DW
    3400
    1.73
    37.0
    ULTRADRIL DW
    3600
    1.52
    28.0
    ULTRADRIL DW
    3601
    1.73
    39.0
    ULTRADRIL DW

  • Thin sections at the Norwegian Offshore Directorate
    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    2836.00
    [m ]
    2837.00
    [m ]
    2839.50
    [m ]
    2842.50
    [m ]
    2844.45
    [m ]
    2846.50
    [m ]
    2849.75
    [m ]
    3334.60
    [m ]
    3336.05
    [m ]
    3339.50
    [m ]
    3340.05
    [m ]
    3340.45
    [m ]
    3340.57
    [m ]
    3340.90
    [m ]

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.28