Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
27.04.2024 - 01:34
Time of last synchronization with Norwegian Offshore Directorate's internal systems

2/11-1

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/11-1
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/11-1
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LINE 70 - 17.
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Amoco Norway Oil Company
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    29-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    82
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    14.07.1969
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    03.10.1969
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    03.10.1971
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    18.01.2007
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    TOR FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    27.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    68.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4691.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    11
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    133
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    HAUGESUND FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 14' 16.98'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 27' 7.05'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6232804.37
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    528015.41
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    168

  • Wellbore history
    General
    Exploration well 2/11-1 is located on the southern periphery of the Valhall Field in the North Sea. The objective of this early wildcat was to test all horizons down to the Rotliegendes, estimated at 14100 ft (4298 m). Top Permian was expected at 10300 ft (3139 m). Planned TD was at 15000 ft (4572 m).
    The well is Reference Well for the Åsgard, Sola, and Rødby Formations.
    Operations and results
    Well was spudded with the semi-submersible installation on and drilled to TD at 4691 m in the Late Jurassic Tyne Group. The well started to build angle from below ca 3500 m with maximum 11 deg deviation at 4444 m. Otherwise no significant drilling problems were reported from this deep well. The well was drilled water based down to 3432 m and with an invert oil mud (Vertoil) from 3432 m to TD.
    Top Paleocene, Balder Formation, was encountered at 2590 m. Top chalks of the Shetland Group (Tor Formation) was encountered at 2635 m. In addition to shows from the gas detector, free oil was seen floating on the mud pits and samples showed good fluorescence and cut through the interval 2585 m to 2633 m (Balder, Sele, and Lista Formations). Post-well geochemical analyses reported significant oil staining down to 2776 m. By testing live oil was confirmed in the uppermost Tor Formation. The tests were inconclusive with regard to an OWC, but the logs indicated that the contact was at 2655 m. Base Cretaceous was at 3555 m. The well did not reach Permian sediments; in stead the well drilled 1136 m in Late Jurassic shale (Mandal, Farsund and Haugesund Formations) before final TD was set. One conventional core was cut from 3864 to 3878 m in the Farsund formation.No wire line fluid samples were taken.
    The well was permanently abandoned on 3 October 1969 as a minor discovery. After the 2/8-6 Valhall Discovery well was drilled 6 years later well 2/11-1 was re-classified to oil appraisal well for the Valhall Field.
    Testing
    Five drill-stem tests were conducted. DST 1 from 2632 m to 2638.3 m (Lista and topmost Tor Formations) gave some oil to the surface, but rates declined rapidly to no flow, so no viable measurements were obtained. DST 2 and 3 from 2593.8 m to 2604.5 m (Balder - Sele Formations) gave no flow to surface. DST 4 from 2628.6 - 2640.8 m plus 2645.7 - 2650.5 m (Tor Formation) gave gas and oil to the surface at rates of 12686 Sm3 gas and 146 Sm3 oil/day in the final, 4 hours and 42 min flow. The GOR was 87 Sm3/Sm3. Flow rates decreased during the test and the figures were derived from the last readings. DST 5 from 2645.7 - 2650.5 m (Tor Formation) gave no flow to the surface, but 274 m fluid was reversed out after the test and the fluid contained ca 20% oil.

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3863.6
    3878.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    14.6
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.28
    pdf
    1.83
    pdf
    0.90
    pdf
    0.98
    pdf
    0.42
    pdf
    0.33
    pdf
    0.13
    pdf
    4.96

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    19.28
    pdf
    3.15
    pdf
    5.52
    pdf
    20.45
    pdf
    1.85
    pdf
    0.79
    pdf
    3.38
    pdf
    1.88
    pdf
    1.47
    pdf
    115.37
    pdf
    0.56
    pdf
    0.37

  • Documents – Norwegian Offshore Directorate papers

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    2633
    2639
    0.0
    2.0
    2595
    2605
    0.0
    3.0
    2629
    2651
    0.0
    4.0
    2646
    2651
    12.5
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    2.0
    3.0
    4.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    2.0
    3.0
    4.0
    72

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL
    2561
    2683
    CDM
    2439
    4692
    DIL
    1720
    4692
    EPIN
    2530
    2835
    FDC
    365
    3451
    GR
    91
    365
    GR CCL
    2561
    2683
    IES
    365
    1721
    LL-7
    2530
    2835
    MLL-C
    2530
    2835
    SGR-C
    365
    4692
    SNP
    2530
    2835
    SNP
    2530
    2835
    VSLOCITY
    365
    4692

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    131.0
    36
    139.0
    0.00
    LOT
    SURF.COND.
    20
    365.0
    26
    383.0
    0.00
    LOT
    INTERM.
    13 3/8
    1720.0
    17 1/2
    1736.0
    0.00
    LOT
    INTERM.
    9 5/8
    3443.0
    12 1/4
    3450.0
    0.00
    LOT
    OPEN HOLE
    4693.0
    8 1/2
    4693.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    382
    1.11
    48.0
    water-based
    1280
    1.31
    44.0
    water-based
    1735
    1.60
    51.0
    water-based
    2004
    1.65
    55.0
    water-based
    2914
    1.67
    50.0
    water-based
    3374
    1.62
    56.0
    water-based
    3700
    1.79
    58.0
    water-based
    3876
    1.55
    67.0
    water-based

  • Thin sections at the Norwegian Offshore Directorate
    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    12695.00
    [ft ]