Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
05.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7234/6-1

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7234/6-1
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    BARENTS SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7234/6-1
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ABP17307-03007. SP 1214: 3D: ST14003ABPR17 inline: 2557. xline: 6472
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Aker BP ASA
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1858-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    49
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    01.06.2021
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    19.07.2021
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    19.07.2021
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    25.04.2022
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    25.04.2022
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE CARBONIFEROUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    ØRN FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    32.5
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    247.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4035.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4035.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    1.6
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    153
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE CARBONIFEROUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ØRN FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    72° 38' 54.42'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    34° 50' 49.39'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    8066266.55
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    361850.58
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    37
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    9316
  • Wellbore history

    General
    Well 7234/6-1 was drilled to test the Stangnestind prospect on the western flank of the Fedynsky High, 12 km from the Russian border. The primary objective was to explore the hydrocarbon potential of the untested play in Late Carboniferous to Early Permian carbonate intervals of the rn Formation, Gipsdalen Group.
    Operations and results
    An 8 1/2" pilot well, 7234/6-U-1, was spudded on 31 May 2021, 25 m west of the main bore to check for shallow gas, check out unknown shallow lithology in the Lower Cretaceous wedge and to serve as a data acquisition well in the shallow part of the stratigraphy at Stangnestind. The pilot hole was drilled to 672 m. No shallow gas or water flow was detected and a safe setting depth for the 20" casing in the main bore was established.
    Wildcat well 7234/6-1 was spudded with the semi-submersible installation Deepsea Nordkapp on 1 June 2021 and drilled to TD at 4035 m (4041 m loggers depth) m in the rn Formation of Late Carboniferous to Early Permian age. Severe losses up to 60 m3/h occurred at TD. The well was stabilized, and logging commenced successfully. The well was drilled with seawater and hi-vis pills down to 630 m, with KCl water-based mud from 630 m to 3618 m, and with BaraECD 2.2 oil-based mud from 3618 m to TD.
    The well encountered dolomitised limestone reservoir (intra rn Formation) at 3915 m and detected a 57 m column of dry gas. The gas contained 13 % CO2 and 15.9 % H2S. No wells on the Norwegian continental shelf have previously seen any H2S level close to this. 26 m of the reservoir zone had relatively good reservoir properties (average porosity of 14%). Although the gas-water contact was not seen on logs, an MDT-sample at 4012,6 m proved water below the gas column. The well also encountered several thin, gas-bearing sandstone layers in the Triassic. Approximate drillers depth for these intervals are 1340-1350 m, 1563-1573 m, 1646-1650 m,1735-1750 m, 1955-2072 m (several intervals), 2570-2580 m, 2791-2815 m. These sands have moderate to low gas saturations and moderate reservoir properties. The sands at 1563 to 1573 m had direct dull straw yellow fluorescence and a very slow diffuse milky cut, otherwise no oil shows above the OBM background was observed on cuttings from the well.
    No cores were cut. MDT fluid samples were taken at 3973.1 m (gas), 3982.5 m (gas) and 4012.6 m (water).
    The well was permanently abandoned on 19 July 2021 as small gas discovery.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    633.00
    4024.00
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR HNGS
    972
    1600
    LWD - GR RES DIR INC APWD
    520
    746
    LWD - INCL
    480
    520
    LWD - NBGR NBRES DIR INC RES APW
    746
    1600
    MDT LFA MRMS PA
    985
    1585
    PEX NEXT SS AIT
    450
    973
    RTS SS NEXT PEX
    972
    1600
    USIT CBL
    698
    960
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    INTERM.
    30
    332.6
    36
    336.0
    0.00
    INTERM.
    20
    623.1
    26
    630.0
    2.16
    LOT
    INTERM.
    13 3/8
    1900.3
    17 1/2
    1910.0
    1.41
    FIT
    INTERM.
    9 5/8
    3604.0
    12 1/4
    3618.0
    1.72
    FIT
    OPEN HOLE
    4035.0
    8 1/2
    4035.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    285
    1.03
    23.8
    Water
    333
    1.30
    23.5
    Water
    520
    1.03
    3.0
    Water
    623
    1.14
    18.0
    Water
    1140
    1.16
    14.0
    Water
    1910
    1.15
    22.0
    Water
    2099
    1.16
    7.7
    Water
    2846
    1.17
    13.4
    Water
    3443
    1.16
    11.0
    Water
    3574
    1.42
    9.5
    Oil
    3618
    1.30
    9.5
    Oil
    3618
    1.16
    13.4
    Water
    3740
    1.42
    7.2
    Oil
    3740
    1.39
    7.2
    Oil
    3921
    1.39
    7.2
    Oil
    4036
    1.41
    6.7
    Oil